third_party/v8/test/fuzzilli/libreprl.c

// Copyright 2020 the V8 project authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.
// Copyright 2019 Google LLC
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// https://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

#ifndef _GNU_SOURCE
#define _GNU_SOURCE
#endif

#include <errno.h>
#include <fcntl.h>
#include <poll.h>
#include <signal.h>
#include <stdarg.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/mman.h>
#include <sys/time.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <time.h>
#include <unistd.h>

#include "libreprl.h"

// Well-known file descriptor numbers for reprl <-> child communication, child process side
#define REPRL_CHILD_CTRL_IN 100
#define REPRL_CHILD_CTRL_OUT 101
#define REPRL_CHILD_DATA_IN 102
#define REPRL_CHILD_DATA_OUT 103

#define MIN(x, y) ((x) < (y) ? (x) : (y))

static uint64_t current_millis()
{
    struct timespec ts;
    clock_gettime(CLOCK_REALTIME, &ts);
    return ts.tv_sec * 1000 + ts.tv_nsec / 1000000;
}

static char** copy_string_array(const char** orig)
{
    size_t num_entries = 0;
    for (const char** current = orig; *current; current++) {
        num_entries += 1;
    }
    char** copy = calloc(num_entries + 1, sizeof(char*));
    for (size_t i = 0; i < num_entries; i++) {
        copy[i] = strdup(orig[i]);
    }
    return copy;
}

static void free_string_array(char** arr)
{
    if (!arr) return;
    for (char** current = arr; *current; current++) {
        free(*current);
    }
    free(arr);
}

// A unidirectional communication channel for larger amounts of data, up to a maximum size (REPRL_MAX_DATA_SIZE).
// Implemented as a (RAM-backed) file for which the file descriptor is shared with the child process and which is mapped into our address space.
struct data_channel {
    // File descriptor of the underlying file. Directly shared with the child process.
    int fd;
    // Memory mapping of the file, always of size REPRL_MAX_DATA_SIZE.
    char* mapping;
};

struct reprl_context {
    // Whether reprl_initialize has been successfully performed on this context.
    int initialized;

    // Read file descriptor of the control pipe. Only valid if a child process is running (i.e. pid is nonzero).
    int ctrl_in;
    // Write file descriptor of the control pipe. Only valid if a child process is running (i.e. pid is nonzero).
    int ctrl_out;

    // Data channel REPRL -> Child
    struct data_channel* data_in;
    // Data channel Child -> REPRL
    struct data_channel* data_out;

    // Optional data channel for the child's stdout and stderr.
    struct data_channel* stdout;
    struct data_channel* stderr;

    // PID of the child process. Will be zero if no child process is currently running.
    int pid;

    // Arguments and environment for the child process.
    char** argv;
    char** envp;

    // A malloc'd string containing a description of the last error that occurred.
    char* last_error;
};

static int reprl_error(struct reprl_context* ctx, const char *format, ...)
{
    va_list args;
    va_start(args, format);
    free(ctx->last_error);
    vasprintf(&ctx->last_error, format, args);
    return -1;
}

static struct data_channel* reprl_create_data_channel(struct reprl_context* ctx)
{
#ifdef __linux__
    int fd = memfd_create("REPRL_DATA_CHANNEL", MFD_CLOEXEC);
#else
    char path[] = "/tmp/reprl_data_channel_XXXXXXXX";
    if (mktemp(path) < 0) {
        reprl_error(ctx, "Failed to create temporary filename for data channel: %s", strerror(errno));
        return NULL;
    }
    int fd = open(path, O_RDWR | O_CREAT| O_CLOEXEC);
    unlink(path);
#endif
    if (fd == -1 || ftruncate(fd, REPRL_MAX_DATA_SIZE) != 0) {
        reprl_error(ctx, "Failed to create data channel file: %s", strerror(errno));
        return NULL;
    }
    char* mapping = mmap(0, REPRL_MAX_DATA_SIZE, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
    if (mapping == MAP_FAILED) {
        reprl_error(ctx, "Failed to mmap data channel file: %s", strerror(errno));
        return NULL;
    }

    struct data_channel* channel = malloc(sizeof(struct data_channel));
    channel->fd = fd;
    channel->mapping = mapping;
    return channel;
}

static void reprl_destroy_data_channel(struct reprl_context* ctx, struct data_channel* channel)
{
    if (!channel) return;
    close(channel->fd);
    munmap(channel->mapping, REPRL_MAX_DATA_SIZE);
    free(channel);
}

static void reprl_child_terminated(struct reprl_context* ctx)
{
    if (!ctx->pid) return;
    ctx->pid = 0;
    close(ctx->ctrl_in);
    close(ctx->ctrl_out);
}

static void reprl_terminate_child(struct reprl_context* ctx)
{
    if (!ctx->pid) return;
    int status;
    kill(ctx->pid, SIGKILL);
    waitpid(ctx->pid, &status, 0);
    reprl_child_terminated(ctx);
}

static int reprl_spawn_child(struct reprl_context* ctx)
{
    // This is also a good time to ensure the data channel backing files don't grow too large.
    ftruncate(ctx->data_in->fd, REPRL_MAX_DATA_SIZE);
    ftruncate(ctx->data_out->fd, REPRL_MAX_DATA_SIZE);
    if (ctx->stdout) ftruncate(ctx->stdout->fd, REPRL_MAX_DATA_SIZE);
    if (ctx->stderr) ftruncate(ctx->stderr->fd, REPRL_MAX_DATA_SIZE);

    int crpipe[2] = { 0, 0 };          // control pipe child -> reprl
    int cwpipe[2] = { 0, 0 };          // control pipe reprl -> child

    if (pipe(crpipe) != 0) {
        return reprl_error(ctx, "Could not create pipe for REPRL communication: %s", strerror(errno));
    }
    if (pipe(cwpipe) != 0) {
        close(crpipe[0]);
        close(crpipe[1]);
        return reprl_error(ctx, "Could not create pipe for REPRL communication: %s", strerror(errno));
    }

    ctx->ctrl_in = crpipe[0];
    ctx->ctrl_out = cwpipe[1];
    fcntl(ctx->ctrl_in, F_SETFD, FD_CLOEXEC);
    fcntl(ctx->ctrl_out, F_SETFD, FD_CLOEXEC);

    int pid = fork();
    if (pid == 0) {
        dup2(cwpipe[0], REPRL_CHILD_CTRL_IN);
        dup2(crpipe[1], REPRL_CHILD_CTRL_OUT);
        close(cwpipe[0]);
        close(crpipe[1]);

        dup2(ctx->data_out->fd, REPRL_CHILD_DATA_IN);
        dup2(ctx->data_in->fd, REPRL_CHILD_DATA_OUT);

        int devnull = open("/dev/null", O_RDWR);
        dup2(devnull, 0);
        if (ctx->stdout) dup2(ctx->stdout->fd, 1);
        else dup2(devnull, 1);
        if (ctx->stderr) dup2(ctx->stderr->fd, 2);
        else dup2(devnull, 2);
        close(devnull);

        // close all other FDs. We try to use FD_CLOEXEC everywhere, but let's be extra sure we don't leak any fds to the child.
        int tablesize = getdtablesize();
        for (int i = 3; i < tablesize; i++) {
            if (i == REPRL_CHILD_CTRL_IN || i == REPRL_CHILD_CTRL_OUT || i == REPRL_CHILD_DATA_IN || i == REPRL_CHILD_DATA_OUT) {
                continue;
            }
            close(i);
        }

        execve(ctx->argv[0], ctx->argv, ctx->envp);

        fprintf(stderr, "Failed to execute child process %s: %s\n", ctx->argv[0], strerror(errno));
        fflush(stderr);
        _exit(-1);
    }

    close(crpipe[1]);
    close(cwpipe[0]);

    if (pid < 0) {
        close(ctx->ctrl_in);
        close(ctx->ctrl_out);
        return reprl_error(ctx, "Failed to fork: %s", strerror(errno));
    }
    ctx->pid = pid;

    char helo[4] = { 0 };
    if (read(ctx->ctrl_in, helo, 4) != 4) {
        reprl_terminate_child(ctx);
        return reprl_error(ctx, "Did not receive HELO message from child");
    }

    if (strncmp(helo, "HELO", 4) != 0) {
        reprl_terminate_child(ctx);
        return reprl_error(ctx, "Received invalid HELO message from child");
    }

    if (write(ctx->ctrl_out, helo, 4) != 4) {
        reprl_terminate_child(ctx);
        return reprl_error(ctx, "Failed to send HELO reply message to child");
    }

    return 0;
}

struct reprl_context* reprl_create_context()
{
    struct reprl_context* ctx = malloc(sizeof(struct reprl_context));
    memset(ctx, 0, sizeof(struct reprl_context));
    return ctx;
}

int reprl_initialize_context(struct reprl_context* ctx, const char** argv, const char** envp, int capture_stdout, int capture_stderr)
{
    if (ctx->initialized) {
        return reprl_error(ctx, "Context is already initialized");
    }

    // We need to ignore SIGPIPE since we could end up writing to a pipe after our child process has exited.
    signal(SIGPIPE, SIG_IGN);

    ctx->argv = copy_string_array(argv);
    ctx->envp = copy_string_array(envp);

    ctx->data_in = reprl_create_data_channel(ctx);
    ctx->data_out = reprl_create_data_channel(ctx);
    if (capture_stdout) {
        ctx->stdout = reprl_create_data_channel(ctx);
    }
    if (capture_stderr) {
        ctx->stderr = reprl_create_data_channel(ctx);
    }
    if (!ctx->data_in || !ctx->data_out || (capture_stdout && !ctx->stdout) || (capture_stderr && !ctx->stderr)) {
        // Proper error message will have been set by reprl_create_data_channel
        return -1;
    }

    ctx->initialized = 1;
    return 0;
}

void reprl_destroy_context(struct reprl_context* ctx)
{
    reprl_terminate_child(ctx);

    free_string_array(ctx->argv);
    free_string_array(ctx->envp);

    reprl_destroy_data_channel(ctx, ctx->data_in);
    reprl_destroy_data_channel(ctx, ctx->data_out);
    reprl_destroy_data_channel(ctx, ctx->stdout);
    reprl_destroy_data_channel(ctx, ctx->stderr);

    free(ctx->last_error);
    free(ctx);
}

int reprl_execute(struct reprl_context* ctx, const char* script, uint64_t script_length, uint64_t timeout, uint64_t* execution_time, int fresh_instance)
{
    if (!ctx->initialized) {
        return reprl_error(ctx, "REPRL context is not initialized");
    }
    if (script_length > REPRL_MAX_DATA_SIZE) {
        return reprl_error(ctx, "Script too large");
    }

    // Terminate any existing instance if requested.
    if (fresh_instance && ctx->pid) {
        reprl_terminate_child(ctx);
    }

    // Reset file position so the child can simply read(2) and write(2) to these fds.
    lseek(ctx->data_out->fd, 0, SEEK_SET);
    lseek(ctx->data_in->fd, 0, SEEK_SET);
    if (ctx->stdout) {
        lseek(ctx->stdout->fd, 0, SEEK_SET);
    }
    if (ctx->stderr) {
        lseek(ctx->stderr->fd, 0, SEEK_SET);
    }

    // Spawn a new instance if necessary.
    if (!ctx->pid) {
        int r = reprl_spawn_child(ctx);
        if (r != 0) return r;
    }

    // Copy the script to the data channel.
    memcpy(ctx->data_out->mapping, script, script_length);

    // Tell child to execute the script.
    if (write(ctx->ctrl_out, "exec", 4) != 4 ||
        write(ctx->ctrl_out, &script_length, 8) != 8) {
        // These can fail if the child unexpectedly terminated between executions.
        // Check for that here to be able to provide a better error message.
        int status;
        if (waitpid(ctx->pid, &status, WNOHANG) == ctx->pid) {
            reprl_child_terminated(ctx);
            if (WIFEXITED(status)) {
                return reprl_error(ctx, "Child unexpectedly exited with status %i between executions", WEXITSTATUS(status));
            } else {
                return reprl_error(ctx, "Child unexpectedly terminated with signal %i between executions", WTERMSIG(status));
            }
        }
        return reprl_error(ctx, "Failed to send command to child process: %s", strerror(errno));
    }

    // Wait for child to finish execution (or crash).
    uint64_t start_time = current_millis();
    struct pollfd fds = {.fd = ctx->ctrl_in, .events = POLLIN, .revents = 0};
    int res = poll(&fds, 1, (int)timeout);
    *execution_time = current_millis() - start_time;
    if (res == 0) {
        // Execution timed out. Kill child and return a timeout status.
        reprl_terminate_child(ctx);
        return 1 << 16;
    } else if (res != 1) {
        // An error occurred.
        // We expect all signal handlers to be installed with SA_RESTART, so receiving EINTR here is unexpected and thus also an error.
        return reprl_error(ctx, "Failed to poll: %s", strerror(errno));
    }

    // Poll succeeded, so there must be something to read now (either the status or EOF).
    int status;
    ssize_t rv = read(ctx->ctrl_in, &status, 4);
    if (rv < 0) {
        return reprl_error(ctx, "Failed to read from control pipe: %s", strerror(errno));
    } else if (rv != 4) {
        // Most likely, the child process crashed and closed the write end of the control pipe.
        // Unfortunately, there probably is nothing that guarantees that waitpid() will immediately succeed now,
        // and we also don't want to block here. So just retry waitpid() a few times...
        int success = 0;
        do {
            success = waitpid(ctx->pid, &status, WNOHANG) == ctx->pid;
            if (!success) usleep(10);
        } while (!success && current_millis() - start_time < timeout);

        if (!success) {
            // Wait failed, so something weird must have happened. Maybe somehow the control pipe was closed without the child exiting?
            // Probably the best we can do is kill the child and return an error.
            reprl_terminate_child(ctx);
            return reprl_error(ctx, "Child in weird state after execution");
        }

        // Cleanup any state related to this child process.
        reprl_child_terminated(ctx);

        if (WIFEXITED(status)) {
            status = WEXITSTATUS(status) << 8;
        } else if (WIFSIGNALED(status)) {
            status = WTERMSIG(status);
        } else {
            // This shouldn't happen, since we don't specify WUNTRACED for waitpid...
            return reprl_error(ctx, "Waitpid returned unexpected child state %i", status);
        }
    }

    // The status must be a positive number, see the status encoding format below.
    // We also don't allow the child process to indicate a timeout. If we wanted,
    // we could treat it as an error if the upper bits are set.
    status &= 0xffff;

    return status;
}

/// The 32bit REPRL exit status as returned by reprl_execute has the following format:
///     [ 00000000 | did_timeout | exit_code | terminating_signal ]
/// Only one of did_timeout, exit_code, or terminating_signal may be set at one time.
int RIFSIGNALED(int status)
{
    return (status & 0xff) != 0;
}

int RIFEXITED(int status)
{
    return !RIFSIGNALED(status) && !RIFTIMEDOUT(status);
}

int RIFTIMEDOUT(int status)
{
    return (status & 0xff0000) != 0;
}

int RTERMSIG(int status)
{
    return status & 0xff;
}

int REXITSTATUS(int status)
{
    return (status >> 8) & 0xff;
}

static const char* fetch_data_channel_content(struct data_channel* channel)
{
    if (!channel) return "";
    size_t pos = lseek(channel->fd, 0, SEEK_CUR);
    pos = MIN(pos, REPRL_MAX_DATA_SIZE - 1);
    channel->mapping[pos] = 0;
    return channel->mapping;
}

const char* reprl_fetch_fuzzout(struct reprl_context* ctx)
{
    return fetch_data_channel_content(ctx->data_in);
}

const char* reprl_fetch_stdout(struct reprl_context* ctx)
{
    return fetch_data_channel_content(ctx->stdout);
}

const char* reprl_fetch_stderr(struct reprl_context* ctx)
{
    return fetch_data_channel_content(ctx->stderr);
}

const char* reprl_get_last_error(struct reprl_context* ctx)
{
    return ctx->last_error;
}