src/third_party/openssl/openssl/crypto/sha/asm/sha1-sparcv9.pl - cobalt - Git at Google

 #!/usr/bin/env perl

 # ====================================================================
 # Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
 # project. The module is, however, dual licensed under OpenSSL and
 # CRYPTOGAMS licenses depending on where you obtain it. For further
 # details see http://www.openssl.org/~appro/cryptogams/.
 # ====================================================================

 # Performance improvement is not really impressive on pre-T1 CPU: +8%
 # over Sun C and +25% over gcc [3.3]. While on T1, a.k.a. Niagara, it
 # turned to be 40% faster than 64-bit code generated by Sun C 5.8 and
 # >2x than 64-bit code generated by gcc 3.4. And there is a gimmick.
 # X[16] vector is packed to 8 64-bit registers and as result nothing
 # is spilled on stack. In addition input data is loaded in compact
 # instruction sequence, thus minimizing the window when the code is
 # subject to [inter-thread] cache-thrashing hazard. The goal is to
 # ensure scalability on UltraSPARC T1, or rather to avoid decay when
 # amount of active threads exceeds the number of physical cores.

 $bits=32;
 for (@ARGV)	{ $bits=64 if (/\-m64/ || /\-xarch\=v9/); }
 if ($bits==64)	{ $bias=2047; $frame=192; }
 else		{ $bias=0;    $frame=112; }

 $output=shift;
 open STDOUT,">$output";

 @X=("%o0","%o1","%o2","%o3","%o4","%o5","%g1","%o7");
 $rot1m="%g2";
 $tmp64="%g3";
 $Xi="%g4";
 $A="%l0";
 $B="%l1";
 $C="%l2";
 $D="%l3";
 $E="%l4";
 @V=($A,$B,$C,$D,$E);
 $K_00_19="%l5";
 $K_20_39="%l6";
 $K_40_59="%l7";
 $K_60_79="%g5";
 @K=($K_00_19,$K_20_39,$K_40_59,$K_60_79);

 $ctx="%i0";
 $inp="%i1";
 $len="%i2";
 $tmp0="%i3";
 $tmp1="%i4";
 $tmp2="%i5";

 sub BODY_00_15 {
 my ($i,$a,$b,$c,$d,$e)=@_;
 my $xi=($i&1)?@X[($i/2)%8]:$Xi;

 $code.=<<___;
 	sll	$a,5,$tmp0		!! $i
 	add	@K[$i/20],$e,$e
 	srl	$a,27,$tmp1
 	add	$tmp0,$e,$e
 	and	$c,$b,$tmp0
 	add	$tmp1,$e,$e
 	sll	$b,30,$tmp2
 	andn	$d,$b,$tmp1
 	srl	$b,2,$b
 	or	$tmp1,$tmp0,$tmp1
 	or	$tmp2,$b,$b
 	add	$xi,$e,$e
 ___
 if ($i&1 && $i<15) {
 	$code.=
 	"	srlx	@X[(($i+1)/2)%8],32,$Xi\n";
 }
 $code.=<<___;
 	add	$tmp1,$e,$e
 ___
 }

 sub Xupdate {
 my ($i,$a,$b,$c,$d,$e)=@_;
 my $j=$i/2;

 if ($i&1) {
 $code.=<<___;
 	sll	$a,5,$tmp0		!! $i
 	add	@K[$i/20],$e,$e
 	srl	$a,27,$tmp1
 ___
 } else {
 $code.=<<___;
 	sllx	@X[($j+6)%8],32,$Xi	! Xupdate($i)
 	xor	@X[($j+1)%8],@X[$j%8],@X[$j%8]
 	srlx	@X[($j+7)%8],32,$tmp1
 	xor	@X[($j+4)%8],@X[$j%8],@X[$j%8]
 	sll	$a,5,$tmp0		!! $i
 	or	$tmp1,$Xi,$Xi
 	add	@K[$i/20],$e,$e		!!
 	xor	$Xi,@X[$j%8],@X[$j%8]
 	srlx	@X[$j%8],31,$Xi
 	add	@X[$j%8],@X[$j%8],@X[$j%8]
 	and	$Xi,$rot1m,$Xi
 	andn	@X[$j%8],$rot1m,@X[$j%8]
 	srl	$a,27,$tmp1		!!
 	or	$Xi,@X[$j%8],@X[$j%8]
 ___
 }
 }

 sub BODY_16_19 {
 my ($i,$a,$b,$c,$d,$e)=@_;

 	&Xupdate(@_);
     if ($i&1) {
 	$xi=@X[($i/2)%8];
     } else {
 	$xi=$Xi;
 	$code.="\tsrlx	@X[($i/2)%8],32,$xi\n";
     }
 $code.=<<___;
 	add	$tmp0,$e,$e		!!
 	and	$c,$b,$tmp0
 	add	$tmp1,$e,$e
 	sll	$b,30,$tmp2
 	add	$xi,$e,$e
 	andn	$d,$b,$tmp1
 	srl	$b,2,$b
 	or	$tmp1,$tmp0,$tmp1
 	or	$tmp2,$b,$b
 	add	$tmp1,$e,$e
 ___
 }

 sub BODY_20_39 {
 my ($i,$a,$b,$c,$d,$e)=@_;
 my $xi;
 	&Xupdate(@_);
     if ($i&1) {
 	$xi=@X[($i/2)%8];
     } else {
 	$xi=$Xi;
 	$code.="\tsrlx	@X[($i/2)%8],32,$xi\n";
     }
 $code.=<<___;
 	add	$tmp0,$e,$e		!!
 	xor	$c,$b,$tmp0
 	add	$tmp1,$e,$e
 	sll	$b,30,$tmp2
 	xor	$d,$tmp0,$tmp1
 	srl	$b,2,$b
 	add	$tmp1,$e,$e
 	or	$tmp2,$b,$b
 	add	$xi,$e,$e
 ___
 }

 sub BODY_40_59 {
 my ($i,$a,$b,$c,$d,$e)=@_;
 my $xi;
 	&Xupdate(@_);
     if ($i&1) {
 	$xi=@X[($i/2)%8];
     } else {
 	$xi=$Xi;
 	$code.="\tsrlx	@X[($i/2)%8],32,$xi\n";
     }
 $code.=<<___;
 	add	$tmp0,$e,$e		!!
 	and	$c,$b,$tmp0
 	add	$tmp1,$e,$e
 	sll	$b,30,$tmp2
 	or	$c,$b,$tmp1
 	srl	$b,2,$b
 	and	$d,$tmp1,$tmp1
 	add	$xi,$e,$e
 	or	$tmp1,$tmp0,$tmp1
 	or	$tmp2,$b,$b
 	add	$tmp1,$e,$e
 ___
 }

 $code.=<<___ if ($bits==64);
 .register	%g2,#scratch
 .register	%g3,#scratch
 ___
 $code.=<<___;
 .section	".text",#alloc,#execinstr

 .align	32
 .globl	sha1_block_data_order
 sha1_block_data_order:
 	save	%sp,-$frame,%sp
 	sllx	$len,6,$len
 	add	$inp,$len,$len

 	or	%g0,1,$rot1m
 	sllx	$rot1m,32,$rot1m
 	or	$rot1m,1,$rot1m

 	ld	[$ctx+0],$A
 	ld	[$ctx+4],$B
 	ld	[$ctx+8],$C
 	ld	[$ctx+12],$D
 	ld	[$ctx+16],$E
 	andn	$inp,7,$tmp0

 	sethi	%hi(0x5a827999),$K_00_19
 	or	$K_00_19,%lo(0x5a827999),$K_00_19
 	sethi	%hi(0x6ed9eba1),$K_20_39
 	or	$K_20_39,%lo(0x6ed9eba1),$K_20_39
 	sethi	%hi(0x8f1bbcdc),$K_40_59
 	or	$K_40_59,%lo(0x8f1bbcdc),$K_40_59
 	sethi	%hi(0xca62c1d6),$K_60_79
 	or	$K_60_79,%lo(0xca62c1d6),$K_60_79

 .Lloop:
 	ldx	[$tmp0+0],@X[0]
 	ldx	[$tmp0+16],@X[2]
 	ldx	[$tmp0+32],@X[4]
 	ldx	[$tmp0+48],@X[6]
 	and	$inp,7,$tmp1
 	ldx	[$tmp0+8],@X[1]
 	sll	$tmp1,3,$tmp1
 	ldx	[$tmp0+24],@X[3]
 	subcc	%g0,$tmp1,$tmp2	! should be 64-$tmp1, but -$tmp1 works too
 	ldx	[$tmp0+40],@X[5]
 	bz,pt	%icc,.Laligned
 	ldx	[$tmp0+56],@X[7]

 	sllx	@X[0],$tmp1,@X[0]
 	ldx	[$tmp0+64],$tmp64
 ___
 for($i=0;$i<7;$i++)
 {   $code.=<<___;
 	srlx	@X[$i+1],$tmp2,$Xi
 	sllx	@X[$i+1],$tmp1,@X[$i+1]
 	or	$Xi,@X[$i],@X[$i]
 ___
 }
 $code.=<<___;
 	srlx	$tmp64,$tmp2,$tmp64
 	or	$tmp64,@X[7],@X[7]
 .Laligned:
 	srlx	@X[0],32,$Xi
 ___
 for ($i=0;$i<16;$i++)	{ &BODY_00_15($i,@V); unshift(@V,pop(@V)); }
 for (;$i<20;$i++)	{ &BODY_16_19($i,@V); unshift(@V,pop(@V)); }
 for (;$i<40;$i++)	{ &BODY_20_39($i,@V); unshift(@V,pop(@V)); }
 for (;$i<60;$i++)	{ &BODY_40_59($i,@V); unshift(@V,pop(@V)); }
 for (;$i<80;$i++)	{ &BODY_20_39($i,@V); unshift(@V,pop(@V)); }
 $code.=<<___;

 	ld	[$ctx+0],@X[0]
 	ld	[$ctx+4],@X[1]
 	ld	[$ctx+8],@X[2]
 	ld	[$ctx+12],@X[3]
 	add	$inp,64,$inp
 	ld	[$ctx+16],@X[4]
 	cmp	$inp,$len

 	add	$A,@X[0],$A
 	st	$A,[$ctx+0]
 	add	$B,@X[1],$B
 	st	$B,[$ctx+4]
 	add	$C,@X[2],$C
 	st	$C,[$ctx+8]
 	add	$D,@X[3],$D
 	st	$D,[$ctx+12]
 	add	$E,@X[4],$E
 	st	$E,[$ctx+16]

 	bne	`$bits==64?"%xcc":"%icc"`,.Lloop
 	andn	$inp,7,$tmp0

 	ret
 	restore
 .type	sha1_block_data_order,#function
 .size	sha1_block_data_order,(.-sha1_block_data_order)
 .asciz	"SHA1 block transform for SPARCv9, CRYPTOGAMS by <appro\@openssl.org>"
 .align	4
 ___

 $code =~ s/\`([^\`]*)\`/eval $1/gem;
 print $code;
 close STDOUT;
	#!/usr/bin/env perl

	# ====================================================================
	# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
	# project. The module is, however, dual licensed under OpenSSL and
	# CRYPTOGAMS licenses depending on where you obtain it. For further
	# details see http://www.openssl.org/~appro/cryptogams/.
	# ====================================================================

	# Performance improvement is not really impressive on pre-T1 CPU: +8%
	# over Sun C and +25% over gcc [3.3]. While on T1, a.k.a. Niagara, it
	# turned to be 40% faster than 64-bit code generated by Sun C 5.8 and
	# >2x than 64-bit code generated by gcc 3.4. And there is a gimmick.
	# X[16] vector is packed to 8 64-bit registers and as result nothing
	# is spilled on stack. In addition input data is loaded in compact
	# instruction sequence, thus minimizing the window when the code is
	# subject to [inter-thread] cache-thrashing hazard. The goal is to
	# ensure scalability on UltraSPARC T1, or rather to avoid decay when
	# amount of active threads exceeds the number of physical cores.

	$bits=32;
	for (@ARGV) { $bits=64 if (/\-m64/ \|\| /\-xarch\=v9/); }
	if ($bits==64) { $bias=2047; $frame=192; }
	else { $bias=0; $frame=112; }

	$output=shift;
	open STDOUT,">$output";

	@X=("%o0","%o1","%o2","%o3","%o4","%o5","%g1","%o7");
	$rot1m="%g2";
	$tmp64="%g3";
	$Xi="%g4";
	$A="%l0";
	$B="%l1";
	$C="%l2";
	$D="%l3";
	$E="%l4";
	@V=($A,$B,$C,$D,$E);
	$K_00_19="%l5";
	$K_20_39="%l6";
	$K_40_59="%l7";
	$K_60_79="%g5";
	@K=($K_00_19,$K_20_39,$K_40_59,$K_60_79);

	$ctx="%i0";
	$inp="%i1";
	$len="%i2";
	$tmp0="%i3";
	$tmp1="%i4";
	$tmp2="%i5";

	sub BODY_00_15 {
	my ($i,$a,$b,$c,$d,$e)=@_;
	my $xi=($i&1)?@X[($i/2)%8]:$Xi;

	$code.=<<___;
	sll $a,5,$tmp0 !! $i
	add @K[$i/20],$e,$e
	srl $a,27,$tmp1
	add $tmp0,$e,$e
	and $c,$b,$tmp0
	add $tmp1,$e,$e
	sll $b,30,$tmp2
	andn $d,$b,$tmp1
	srl $b,2,$b
	or $tmp1,$tmp0,$tmp1
	or $tmp2,$b,$b
	add $xi,$e,$e
	___
	if ($i&1 && $i<15) {
	$code.=
	" srlx @X[(($i+1)/2)%8],32,$Xi\n";
	}
	$code.=<<___;
	add $tmp1,$e,$e
	___
	}

	sub Xupdate {
	my ($i,$a,$b,$c,$d,$e)=@_;
	my $j=$i/2;

	if ($i&1) {
	$code.=<<___;
	sll $a,5,$tmp0 !! $i
	add @K[$i/20],$e,$e
	srl $a,27,$tmp1
	___
	} else {
	$code.=<<___;
	sllx @X[($j+6)%8],32,$Xi ! Xupdate($i)
	xor @X[($j+1)%8],@X[$j%8],@X[$j%8]
	srlx @X[($j+7)%8],32,$tmp1
	xor @X[($j+4)%8],@X[$j%8],@X[$j%8]
	sll $a,5,$tmp0 !! $i
	or $tmp1,$Xi,$Xi
	add @K[$i/20],$e,$e !!
	xor $Xi,@X[$j%8],@X[$j%8]
	srlx @X[$j%8],31,$Xi
	add @X[$j%8],@X[$j%8],@X[$j%8]
	and $Xi,$rot1m,$Xi
	andn @X[$j%8],$rot1m,@X[$j%8]
	srl $a,27,$tmp1 !!
	or $Xi,@X[$j%8],@X[$j%8]
	___
	}
	}

	sub BODY_16_19 {
	my ($i,$a,$b,$c,$d,$e)=@_;

	&Xupdate(@_);
	if ($i&1) {
	$xi=@X[($i/2)%8];
	} else {
	$xi=$Xi;
	$code.="\tsrlx @X[($i/2)%8],32,$xi\n";
	}
	$code.=<<___;
	add $tmp0,$e,$e !!
	and $c,$b,$tmp0
	add $tmp1,$e,$e
	sll $b,30,$tmp2
	add $xi,$e,$e
	andn $d,$b,$tmp1
	srl $b,2,$b
	or $tmp1,$tmp0,$tmp1
	or $tmp2,$b,$b
	add $tmp1,$e,$e
	___
	}

	sub BODY_20_39 {
	my ($i,$a,$b,$c,$d,$e)=@_;
	my $xi;
	&Xupdate(@_);
	if ($i&1) {
	$xi=@X[($i/2)%8];
	} else {
	$xi=$Xi;
	$code.="\tsrlx @X[($i/2)%8],32,$xi\n";
	}
	$code.=<<___;
	add $tmp0,$e,$e !!
	xor $c,$b,$tmp0
	add $tmp1,$e,$e
	sll $b,30,$tmp2
	xor $d,$tmp0,$tmp1
	srl $b,2,$b
	add $tmp1,$e,$e
	or $tmp2,$b,$b
	add $xi,$e,$e
	___
	}

	sub BODY_40_59 {
	my ($i,$a,$b,$c,$d,$e)=@_;
	my $xi;
	&Xupdate(@_);
	if ($i&1) {
	$xi=@X[($i/2)%8];
	} else {
	$xi=$Xi;
	$code.="\tsrlx @X[($i/2)%8],32,$xi\n";
	}
	$code.=<<___;
	add $tmp0,$e,$e !!
	and $c,$b,$tmp0
	add $tmp1,$e,$e
	sll $b,30,$tmp2
	or $c,$b,$tmp1
	srl $b,2,$b
	and $d,$tmp1,$tmp1
	add $xi,$e,$e
	or $tmp1,$tmp0,$tmp1
	or $tmp2,$b,$b
	add $tmp1,$e,$e
	___
	}

	$code.=<<___ if ($bits==64);
	.register %g2,#scratch
	.register %g3,#scratch
	___
	$code.=<<___;
	.section ".text",#alloc,#execinstr

	.align 32
	.globl sha1_block_data_order
	sha1_block_data_order:
	save %sp,-$frame,%sp
	sllx $len,6,$len
	add $inp,$len,$len

	or %g0,1,$rot1m
	sllx $rot1m,32,$rot1m
	or $rot1m,1,$rot1m

	ld [$ctx+0],$A
	ld [$ctx+4],$B
	ld [$ctx+8],$C
	ld [$ctx+12],$D
	ld [$ctx+16],$E
	andn $inp,7,$tmp0

	sethi %hi(0x5a827999),$K_00_19
	or $K_00_19,%lo(0x5a827999),$K_00_19
	sethi %hi(0x6ed9eba1),$K_20_39
	or $K_20_39,%lo(0x6ed9eba1),$K_20_39
	sethi %hi(0x8f1bbcdc),$K_40_59
	or $K_40_59,%lo(0x8f1bbcdc),$K_40_59
	sethi %hi(0xca62c1d6),$K_60_79
	or $K_60_79,%lo(0xca62c1d6),$K_60_79

	.Lloop:
	ldx [$tmp0+0],@X[0]
	ldx [$tmp0+16],@X[2]
	ldx [$tmp0+32],@X[4]
	ldx [$tmp0+48],@X[6]
	and $inp,7,$tmp1
	ldx [$tmp0+8],@X[1]
	sll $tmp1,3,$tmp1
	ldx [$tmp0+24],@X[3]
	subcc %g0,$tmp1,$tmp2 ! should be 64-$tmp1, but -$tmp1 works too
	ldx [$tmp0+40],@X[5]
	bz,pt %icc,.Laligned
	ldx [$tmp0+56],@X[7]

	sllx @X[0],$tmp1,@X[0]
	ldx [$tmp0+64],$tmp64
	___
	for($i=0;$i<7;$i++)
	{ $code.=<<___;
	srlx @X[$i+1],$tmp2,$Xi
	sllx @X[$i+1],$tmp1,@X[$i+1]
	or $Xi,@X[$i],@X[$i]
	___
	}
	$code.=<<___;
	srlx $tmp64,$tmp2,$tmp64
	or $tmp64,@X[7],@X[7]
	.Laligned:
	srlx @X[0],32,$Xi
	___
	for ($i=0;$i<16;$i++) { &BODY_00_15($i,@V); unshift(@V,pop(@V)); }
	for (;$i<20;$i++) { &BODY_16_19($i,@V); unshift(@V,pop(@V)); }
	for (;$i<40;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); }
	for (;$i<60;$i++) { &BODY_40_59($i,@V); unshift(@V,pop(@V)); }
	for (;$i<80;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); }
	$code.=<<___;

	ld [$ctx+0],@X[0]
	ld [$ctx+4],@X[1]
	ld [$ctx+8],@X[2]
	ld [$ctx+12],@X[3]
	add $inp,64,$inp
	ld [$ctx+16],@X[4]
	cmp $inp,$len

	add $A,@X[0],$A
	st $A,[$ctx+0]
	add $B,@X[1],$B
	st $B,[$ctx+4]
	add $C,@X[2],$C
	st $C,[$ctx+8]
	add $D,@X[3],$D
	st $D,[$ctx+12]
	add $E,@X[4],$E
	st $E,[$ctx+16]

	bne `$bits==64?"%xcc":"%icc"`,.Lloop
	andn $inp,7,$tmp0

	ret
	restore
	.type sha1_block_data_order,#function
	.size sha1_block_data_order,(.-sha1_block_data_order)
	.asciz "SHA1 block transform for SPARCv9, CRYPTOGAMS by <appro\@openssl.org>"
	.align 4
	___

	$code =~ s/\`([^\`]*)\`/eval $1/gem;
	print $code;
	close STDOUT;