blob: 04a0d5e54fa11ca9e194d367f1259f9d4af5c10a [file] [log] [blame]
# Copyright 2014 Google Inc. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# This file should be included in all .gyp files used by Cobalt. Normally,
# this should be done automatically by gyp_cobalt.
{
'variables': {
# Cobalt variables.
# Whether Cobalt is being built.
'cobalt': 1,
# Similarly to chromium_code, marks the projects that are created by the
# Cobalt team and thus are held to the highest standards of code health.
'cobalt_code%': 0,
# Contains the current build configuration.
'cobalt_config%': 'gold',
'cobalt_fastbuild%': 0,
# Build version number.
'cobalt_version%': 0,
# Contains the name of the hosting OS. The value is defined by gyp_cobalt.
'host_os%': 'win',
# The "real" target_arch that is used to select the correct delegate source.
# TODO: Investigate why adding % will break the build on platforms
# other than Windows
# TODO: Remove after starboard.
'actual_target_arch': '<(target_arch)',
# The target platform id as a string, like 'ps3', 'ps4', etc..
'sb_target_platform': '',
# The operating system of the target, separate from the target_arch. In many
# cases, an 'unknown' value is fine, but, if set to 'linux', then we can
# assume some things, and it'll save us some configuration time.
'target_os%': 'unknown',
# Defines what kind of rasterizer will be used. This can be adjusted to
# force a stub graphics implementation or software graphics implementation.
# It can be one of the following options:
# 'hardware' -- As much hardware acceleration of graphics commands as
# possible.
# 'software' -- Perform most rasterization using the CPU and only interact
# with the GPU to send the final image to the output window.
# 'stub' -- Stub graphics rasterization. A rasterizer object will
# still be available and valid, but it will do nothing.
'rasterizer_type%': 'hardware',
# The variables allow changing the target type on platforms where the
# native code may require an additional packaging step (ex. Android).
'gtest_target_type%': 'executable',
'final_executable_type%': 'executable',
'posix_emulation_target_type%': 'static_library',
'webkit_target_type%': 'static_library',
# Set to 1 to build with DIAL support.
'in_app_dial%': 0,
# Set to 1 to enable H5vccAccountManager.
'enable_account_manager%': 0,
# Set to 1 to compile with SPDY support.
'enable_spdy%': 0,
# Halt execution on failure to allocate memory.
'abort_on_allocation_failure%': 1,
# Used by cobalt/media/media.gyp to pick a proper media platform.
'sb_media_platform%': 'starboard',
'sb_has_deploy_step%': 0,
# Needed for backwards compatibility with lbshell code.
'lbshell_root%': '<(DEPTH)/lbshell',
# The relative path from src/ to the directory containing the
# starboard_platform.gyp file, or the empty string if not an autodiscovered
# platform.
'starboard_path%': '',
# The source of EGL and GLES headers and libraries.
# Valid values (case and everything sensitive!):
# 'none' - No EGL + GLES implementation is available on this platform.
# 'system_gles3' - Use the system implementation of EGL + GLES3. The
# headers and libraries must be on the system include and
# link paths.
# 'system_gles2' - Use the system implementation of EGL + GLES2. The
# headers and libraries must be on the system include and
# link paths.
# 'glimp' - Cobalt's own EGL + GLES2 implementation. This requires a
# valid Glimp implementation for the platform.
# 'angle' - A DirectX-to-OpenGL adaptation layer. This requires a valid
# ANGLE implementation for the platform.
# Choosing an unsupported value will result in a GYP error:
# "cobalt/renderer/egl_and_gles/egl_and_gles_<gl_type>.gyp not found"
'gl_type%': 'system_gles2',
# Cache parameters
# The following set of parameters define how much memory is reserved for
# different Cobalt caches. These caches affect CPU *and* GPU memory usage.
#
# The sum of the following caches effectively describes the maximum GPU
# texture memory usage (though it doesn't consider video textures and
# display color buffers):
# - skia_cache_size_in_bytes (GLES2 rasterizer only)
# - scratch_surface_cache_size_in_bytes
# - surface_cache_size_in_bytes
# - image_cache_size_in_bytes
#
# The other caches affect CPU memory usage.
# Determines the capacity of the skia cache. The Skia cache is maintained
# within Skia and is used to cache the results of complicated effects such
# as shadows, so that Skia draw calls that are used repeatedly across
# frames can be cached into surfaces. This setting is only relevant when
# using the hardware-accelerated Skia rasterizer (e.g. as opposed to the
# Blitter API).
'skia_cache_size_in_bytes%': 4 * 1024 * 1024,
# Determines the capacity of the scratch surface cache. The scratch
# surface cache facilitates the reuse of temporary offscreen surfaces
# within a single frame. This setting is only relevant when using the
# hardware-accelerated Skia rasterizer.
'scratch_surface_cache_size_in_bytes%': 7 * 1024 * 1024,
# Determines the capacity of the surface cache. The surface cache tracks
# which render tree nodes are being re-used across frames and stores the
# nodes that are most CPU-expensive to render into surfaces.
'surface_cache_size_in_bytes%': 0,
# Determines the capacity of the image cache which manages image surfaces
# downloaded from a web page. While it depends on the platform, often (and
# ideally) these images are cached within GPU memory.
'image_cache_size_in_bytes%': 64 * 1024 * 1024,
# Determines the capacity of the remote typefaces cache which manages all
# typefaces downloaded from a web page.
'remote_typeface_cache_size_in_bytes%': 5 * 1024 * 1024,
# Compiler configuration.
# The following variables are used to specify compiler and linker
# flags by build configuration. Platform specific .gypi includes and
# .gyp targets can use them to add additional flags.
'compiler_flags%': [],
'linker_flags%': [],
'compiler_flags_debug%': [],
'compiler_flags_c_debug%': [],
'compiler_flags_cc_debug%': [],
'linker_flags_debug%': [],
'compiler_flags_devel%': [],
'compiler_flags_c_devel%': [],
'compiler_flags_cc_devel%': [],
'linker_flags_devel%': [],
'compiler_flags_qa%': [],
'compiler_flags_c_qa%': [],
'compiler_flags_cc_qa%': [],
'linker_flags_qa%': [],
'compiler_flags_gold%': [],
'compiler_flags_c_gold%': [],
'compiler_flags_cc_gold%': [],
'linker_flags_gold%': [],
'compiler_flags_host%': [],
'compiler_flags_c_host%': [],
'compiler_flags_cc_host%': [],
'linker_flags_host%': [],
'platform_libraries%': [],
# Supported engine is currently only "javascriptcore".
# TODO: Figure out how to massage gyp the right way to make this work
# as expected, rather than requiring it to be set for each platform.
#'javascript_engine%': 'javascriptcore',
# Enable jit by default. It can be set to 0 to run in interpreter-only mode.
# Setting this to 1 on a platform or engine for which there is no JIT
# implementation is a no-op.
'cobalt_enable_jit%': 1,
# Customize variables used by Chromium's build/common.gypi.
# Disable a check that looks for an official google api key.
'use_official_google_api_keys': 0,
# Prevents common.gypi from running a bash script which is not required
# to compile Cobalt.
'clang_use_chrome_plugins': 0,
# Disables treat warnings as errors.
'werror': '',
# Cobalt doesn't currently support tcmalloc.
'linux_use_tcmalloc': 0,
'enable_webdriver%': 0,
},
'target_defaults': {
'variables': {
# The condition that operates on cobalt_code is in a target_conditions
# section, and will not have access to the default fallback value of
# cobalt_code at the top of this file, or to the cobalt_code
# variable placed at the root variables scope of .gyp files, because
# those variables are not set at target scope. As a workaround,
# if cobalt_code is not set at target scope, define it in target scope
# to contain whatever value it has during early variable expansion.
# That's enough to make it available during target conditional
# processing.
'cobalt_code%': '<(cobalt_code)',
},
'defines': [
'COBALT',
],
'cflags': [ '<@(compiler_flags)' ],
'ldflags': [ '<@(linker_flags)' ],
'cflags_host': [
'<@(compiler_flags_host)',
'-D__LB_HOST__'
],
'cflags_c_host': [
'<@(compiler_flags_c_host)',
],
'cflags_cc_host': [
'<@(compiler_flags_cc_host)',
],
'ldflags_host': [ '<@(linker_flags_host)' ],
# Location of Cygwin which is used by the build system when running on a
# Windows platform.
'msvs_cygwin_dirs': ['<(DEPTH)/third_party/cygwin'],
# Allows any source file to include files relative to the source tree.
'include_dirs': [ '<(DEPTH)' ],
'libraries': [ '<@(platform_libraries)' ],
# TODO: This is needed to support the option to include
# posix_emulation.h to all compiled source files. This dependency should
# be refactored and removed.
'include_dirs_target': [
'<(DEPTH)/lbshell/src',
],
'conditions': [
['posix_emulation_target_type == "shared_library"', {
'defines': [
'__LB_BASE_SHARED__=1',
],
}],
['webkit_target_type == "shared_library"', {
'defines': [
'COBALT_WEBKIT_SHARED=1',
],
}],
['OS == "lb_shell"', {
'defines': [
'__LB_SHELL__',
],
'include_dirs_target': [
'<(DEPTH)/lbshell/src/platform/<(target_arch)',
'<(DEPTH)/lbshell/src/platform/<(target_arch)/posix_emulation/lb_shell',
# headers that we don't need, but should exist somewhere in the path:
'<(DEPTH)/lbshell/src/platform/<(target_arch)/posix_emulation/place_holders',
],
}], # OS == "lb_shell"
['OS == "starboard"', {
# Keeps common Starboard target changes in the starboard project.
'includes': [
'../../../starboard/starboard_base_target.gypi',
],
}], # OS == "starboard"
['target_arch in ["xb1", "xb360"]', {
'defines': ['_USE_MATH_DEFINES'], # For #define M_PI
}],
['in_app_dial == 1', {
'defines': [
'DIAL_SERVER',
],
}],
['enable_file_scheme == 1', {
'defines': [
'COBALT_ENABLE_FILE_SCHEME',
],
}],
['enable_spdy == 0', {
'defines': [
'COBALT_DISABLE_SPDY',
],
}],
],
# TODO: Revisit and remove unused configurations.
'configurations': {
'debug_base': {
'abstract': 1,
# no optimization, include symbols:
'cflags': [ '<@(compiler_flags_debug)' ],
'cflags_c': [ '<@(compiler_flags_c_debug)' ],
'cflags_cc': [ '<@(compiler_flags_cc_debug)' ],
'ldflags': [ '<@(linker_flags_debug)' ],
'defines': [
'ALLOCATOR_STATS_TRACKING',
'COBALT_BOX_DUMP_ENABLED',
'COBALT_BUILD_TYPE_DEBUG',
'_DEBUG',
'ENABLE_DEBUG_COMMAND_LINE_SWITCHES',
'ENABLE_DEBUG_C_VAL',
'ENABLE_DEBUG_CONSOLE',
'ENABLE_DIR_SOURCE_ROOT_ACCESS',
'ENABLE_IGNORE_CERTIFICATE_ERRORS',
'ENABLE_PARTIAL_LAYOUT_CONTROL',
'ENABLE_TEST_RUNNER',
'__LB_SHELL__ENABLE_SCREENSHOT__',
'__LB_SHELL__FORCE_LOGGING__', # TODO: Rename to COBALT_LOGGING_ENABLED.
'SK_DEVELOPER',
],
}, # end of debug_base
'devel_base': {
'abstract': 1,
# optimize, include symbols:
'cflags': [ '<@(compiler_flags_devel)' ],
'cflags_c': [ '<@(compiler_flags_c_devel)' ],
'cflags_cc': [ '<@(compiler_flags_cc_devel)' ],
'ldflags': [ '<@(linker_flags_devel)' ],
'defines': [
'_DEBUG',
'ALLOCATOR_STATS_TRACKING',
'COBALT_BUILD_TYPE_DEVEL',
'ENABLE_DEBUG_COMMAND_LINE_SWITCHES',
'ENABLE_DEBUG_C_VAL',
'ENABLE_DEBUG_CONSOLE',
'ENABLE_DIR_SOURCE_ROOT_ACCESS',
'ENABLE_IGNORE_CERTIFICATE_ERRORS',
'ENABLE_PARTIAL_LAYOUT_CONTROL',
'ENABLE_TEST_RUNNER',
'__LB_SHELL__ENABLE_SCREENSHOT__',
'__LB_SHELL__FORCE_LOGGING__',
'SK_DEVELOPER',
],
}, # end of devel_base
'qa_base': {
'abstract': 1,
# optimize:
'cflags': [ '<@(compiler_flags_qa)' ],
'cflags_c': [ '<@(compiler_flags_c_qa)' ],
'cflags_cc': [ '<@(compiler_flags_cc_qa)' ],
'ldflags': [ '<@(linker_flags_qa)' ],
'defines': [
'ALLOCATOR_STATS_TRACKING',
'COBALT_BUILD_TYPE_QA',
'ENABLE_DEBUG_COMMAND_LINE_SWITCHES',
'ENABLE_DEBUG_C_VAL',
'ENABLE_DEBUG_CONSOLE',
'ENABLE_DIR_SOURCE_ROOT_ACCESS',
'ENABLE_IGNORE_CERTIFICATE_ERRORS',
'ENABLE_PARTIAL_LAYOUT_CONTROL',
'ENABLE_TEST_RUNNER',
'__LB_SHELL__ENABLE_SCREENSHOT__',
'__LB_SHELL__FOR_QA__',
'NDEBUG',
],
}, # end of devel_base
'gold_base': {
'abstract': 1,
# optimize:
'cflags': [ '<@(compiler_flags_gold)' ],
'cflags_c': [ '<@(compiler_flags_c_gold)' ],
'cflags_cc': [ '<@(compiler_flags_cc_gold)' ],
'ldflags': [ '<@(linker_flags_gold)' ],
'defines': [
'ALLOCATOR_STATS_TRACKING',
'COBALT_BUILD_TYPE_GOLD',
'COBALT_FORCE_CSP',
'COBALT_FORCE_HTTPS',
'__LB_SHELL__FOR_RELEASE__',
'NDEBUG',
'TRACING_DISABLED',
],
}, # end of gold_base
}, # end of configurations
}, # end of target_defaults
# For configurations other than Gold, set the flag that lets test data files
# be copied and carried along with the build.
'conditions': [
['cobalt_config != "gold"', {
'variables' : {
'cobalt_copy_debug_console': 1,
'cobalt_copy_test_data': 1,
'enable_about_scheme': 1,
'enable_file_scheme': 1,
'enable_network_logging': 1,
'enable_remote_debugging%': 1,
'enable_screenshot': 1,
},
},
{
'variables' : {
'cobalt_copy_debug_console': 0,
'cobalt_copy_test_data': 0,
'enable_about_scheme': 0,
'enable_file_scheme': 0,
'enable_network_logging': 0,
'enable_remote_debugging%': 0,
'enable_screenshot': 0,
},
}],
],
}