| /* |
| * Copyright 2006 The Android Open Source Project |
| * |
| * Use of this source code is governed by a BSD-style license that can be |
| * found in the LICENSE file. |
| */ |
| |
| #include "SkScan.h" |
| #include "SkBlitter.h" |
| #include "SkMathPriv.h" |
| #include "SkRasterClip.h" |
| #include "SkFDot6.h" |
| #include "SkLineClipper.h" |
| |
| static void horiline(int x, int stopx, SkFixed fy, SkFixed dy, |
| SkBlitter* blitter) { |
| SkASSERT(x < stopx); |
| |
| do { |
| blitter->blitH(x, fy >> 16, 1); |
| fy += dy; |
| } while (++x < stopx); |
| } |
| |
| static void vertline(int y, int stopy, SkFixed fx, SkFixed dx, |
| SkBlitter* blitter) { |
| SkASSERT(y < stopy); |
| |
| do { |
| blitter->blitH(fx >> 16, y, 1); |
| fx += dx; |
| } while (++y < stopy); |
| } |
| |
| #ifdef SK_DEBUG |
| static bool canConvertFDot6ToFixed(SkFDot6 x) { |
| const int maxDot6 = SK_MaxS32 >> (16 - 6); |
| return SkAbs32(x) <= maxDot6; |
| } |
| #endif |
| |
| void SkScan::HairLineRgn(const SkPoint array[], int arrayCount, const SkRegion* clip, |
| SkBlitter* origBlitter) { |
| SkBlitterClipper clipper; |
| SkIRect clipR, ptsR; |
| |
| const SkScalar max = SkIntToScalar(32767); |
| const SkRect fixedBounds = SkRect::MakeLTRB(-max, -max, max, max); |
| |
| SkRect clipBounds; |
| if (clip) { |
| clipBounds.set(clip->getBounds()); |
| } |
| |
| for (int i = 0; i < arrayCount - 1; ++i) { |
| SkBlitter* blitter = origBlitter; |
| |
| SkPoint pts[2]; |
| |
| // We have to pre-clip the line to fit in a SkFixed, so we just chop |
| // the line. TODO find a way to actually draw beyond that range. |
| if (!SkLineClipper::IntersectLine(&array[i], fixedBounds, pts)) { |
| continue; |
| } |
| |
| // Perform a clip in scalar space, so we catch huge values which might |
| // be missed after we convert to SkFDot6 (overflow) |
| if (clip && !SkLineClipper::IntersectLine(pts, clipBounds, pts)) { |
| continue; |
| } |
| |
| SkFDot6 x0 = SkScalarToFDot6(pts[0].fX); |
| SkFDot6 y0 = SkScalarToFDot6(pts[0].fY); |
| SkFDot6 x1 = SkScalarToFDot6(pts[1].fX); |
| SkFDot6 y1 = SkScalarToFDot6(pts[1].fY); |
| |
| SkASSERT(canConvertFDot6ToFixed(x0)); |
| SkASSERT(canConvertFDot6ToFixed(y0)); |
| SkASSERT(canConvertFDot6ToFixed(x1)); |
| SkASSERT(canConvertFDot6ToFixed(y1)); |
| |
| if (clip) { |
| // now perform clipping again, as the rounding to dot6 can wiggle us |
| // our rects are really dot6 rects, but since we've already used |
| // lineclipper, we know they will fit in 32bits (26.6) |
| const SkIRect& bounds = clip->getBounds(); |
| |
| clipR.set(SkIntToFDot6(bounds.fLeft), SkIntToFDot6(bounds.fTop), |
| SkIntToFDot6(bounds.fRight), SkIntToFDot6(bounds.fBottom)); |
| ptsR.set(x0, y0, x1, y1); |
| ptsR.sort(); |
| |
| // outset the right and bottom, to account for how hairlines are |
| // actually drawn, which may hit the pixel to the right or below of |
| // the coordinate |
| ptsR.fRight += SK_FDot6One; |
| ptsR.fBottom += SK_FDot6One; |
| |
| if (!SkIRect::Intersects(ptsR, clipR)) { |
| continue; |
| } |
| if (!clip->isRect() || !clipR.contains(ptsR)) { |
| blitter = clipper.apply(origBlitter, clip); |
| } |
| } |
| |
| SkFDot6 dx = x1 - x0; |
| SkFDot6 dy = y1 - y0; |
| |
| if (SkAbs32(dx) > SkAbs32(dy)) { // mostly horizontal |
| if (x0 > x1) { // we want to go left-to-right |
| SkTSwap<SkFDot6>(x0, x1); |
| SkTSwap<SkFDot6>(y0, y1); |
| } |
| int ix0 = SkFDot6Round(x0); |
| int ix1 = SkFDot6Round(x1); |
| if (ix0 == ix1) {// too short to draw |
| continue; |
| } |
| |
| SkFixed slope = SkFixedDiv(dy, dx); |
| SkFixed startY = SkFDot6ToFixed(y0) + (slope * ((32 - x0) & 63) >> 6); |
| |
| horiline(ix0, ix1, startY, slope, blitter); |
| } else { // mostly vertical |
| if (y0 > y1) { // we want to go top-to-bottom |
| SkTSwap<SkFDot6>(x0, x1); |
| SkTSwap<SkFDot6>(y0, y1); |
| } |
| int iy0 = SkFDot6Round(y0); |
| int iy1 = SkFDot6Round(y1); |
| if (iy0 == iy1) { // too short to draw |
| continue; |
| } |
| |
| SkFixed slope = SkFixedDiv(dx, dy); |
| SkFixed startX = SkFDot6ToFixed(x0) + (slope * ((32 - y0) & 63) >> 6); |
| |
| vertline(iy0, iy1, startX, slope, blitter); |
| } |
| } |
| } |
| |
| // we don't just draw 4 lines, 'cause that can leave a gap in the bottom-right |
| // and double-hit the top-left. |
| // TODO: handle huge coordinates on rect (before calling SkScalarToFixed) |
| void SkScan::HairRect(const SkRect& rect, const SkRasterClip& clip, |
| SkBlitter* blitter) { |
| SkAAClipBlitterWrapper wrapper; |
| SkBlitterClipper clipper; |
| SkIRect r; |
| |
| r.set(SkScalarToFixed(rect.fLeft) >> 16, |
| SkScalarToFixed(rect.fTop) >> 16, |
| (SkScalarToFixed(rect.fRight) >> 16) + 1, |
| (SkScalarToFixed(rect.fBottom) >> 16) + 1); |
| |
| if (clip.quickReject(r)) { |
| return; |
| } |
| if (!clip.quickContains(r)) { |
| const SkRegion* clipRgn; |
| if (clip.isBW()) { |
| clipRgn = &clip.bwRgn(); |
| } else { |
| wrapper.init(clip, blitter); |
| clipRgn = &wrapper.getRgn(); |
| blitter = wrapper.getBlitter(); |
| } |
| blitter = clipper.apply(blitter, clipRgn); |
| } |
| |
| int width = r.width(); |
| int height = r.height(); |
| |
| if ((width | height) == 0) { |
| return; |
| } |
| if (width <= 2 || height <= 2) { |
| blitter->blitRect(r.fLeft, r.fTop, width, height); |
| return; |
| } |
| // if we get here, we know we have 4 segments to draw |
| blitter->blitH(r.fLeft, r.fTop, width); // top |
| blitter->blitRect(r.fLeft, r.fTop + 1, 1, height - 2); // left |
| blitter->blitRect(r.fRight - 1, r.fTop + 1, 1, height - 2); // right |
| blitter->blitH(r.fLeft, r.fBottom - 1, width); // bottom |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| #include "SkPath.h" |
| #include "SkGeometry.h" |
| #include "SkNx.h" |
| |
| #define kMaxCubicSubdivideLevel 9 |
| #define kMaxQuadSubdivideLevel 5 |
| |
| static int compute_int_quad_dist(const SkPoint pts[3]) { |
| // compute the vector between the control point ([1]) and the middle of the |
| // line connecting the start and end ([0] and [2]) |
| SkScalar dx = SkScalarHalf(pts[0].fX + pts[2].fX) - pts[1].fX; |
| SkScalar dy = SkScalarHalf(pts[0].fY + pts[2].fY) - pts[1].fY; |
| // we want everyone to be positive |
| dx = SkScalarAbs(dx); |
| dy = SkScalarAbs(dy); |
| // convert to whole pixel values (use ceiling to be conservative) |
| int idx = SkScalarCeilToInt(dx); |
| int idy = SkScalarCeilToInt(dy); |
| // use the cheap approx for distance |
| if (idx > idy) { |
| return idx + (idy >> 1); |
| } else { |
| return idy + (idx >> 1); |
| } |
| } |
| |
| static void hair_quad(const SkPoint pts[3], const SkRegion* clip, |
| SkBlitter* blitter, int level, SkScan::HairRgnProc lineproc) { |
| SkASSERT(level <= kMaxQuadSubdivideLevel); |
| |
| SkQuadCoeff coeff(pts); |
| |
| const int lines = 1 << level; |
| Sk2s t(0); |
| Sk2s dt(SK_Scalar1 / lines); |
| |
| SkPoint tmp[(1 << kMaxQuadSubdivideLevel) + 1]; |
| SkASSERT((unsigned)lines < SK_ARRAY_COUNT(tmp)); |
| |
| tmp[0] = pts[0]; |
| Sk2s A = coeff.fA; |
| Sk2s B = coeff.fB; |
| Sk2s C = coeff.fC; |
| for (int i = 1; i < lines; ++i) { |
| t = t + dt; |
| ((A * t + B) * t + C).store(&tmp[i]); |
| } |
| tmp[lines] = pts[2]; |
| lineproc(tmp, lines + 1, clip, blitter); |
| } |
| |
| static SkRect compute_nocheck_quad_bounds(const SkPoint pts[3]) { |
| SkASSERT(SkScalarsAreFinite(&pts[0].fX, 6)); |
| |
| Sk2s min = Sk2s::Load(pts); |
| Sk2s max = min; |
| for (int i = 1; i < 3; ++i) { |
| Sk2s pair = Sk2s::Load(pts+i); |
| min = Sk2s::Min(min, pair); |
| max = Sk2s::Max(max, pair); |
| } |
| return { min[0], min[1], max[0], max[1] }; |
| } |
| |
| static bool is_inverted(const SkRect& r) { |
| return r.fLeft > r.fRight || r.fTop > r.fBottom; |
| } |
| |
| // Can't call SkRect::intersects, since it cares about empty, and we don't (since we tracking |
| // something to be stroked, so empty can still draw something (e.g. horizontal line) |
| static bool geometric_overlap(const SkRect& a, const SkRect& b) { |
| SkASSERT(!is_inverted(a) && !is_inverted(b)); |
| return a.fLeft < b.fRight && b.fLeft < a.fRight && |
| a.fTop < b.fBottom && b.fTop < a.fBottom; |
| } |
| |
| // Can't call SkRect::contains, since it cares about empty, and we don't (since we tracking |
| // something to be stroked, so empty can still draw something (e.g. horizontal line) |
| static bool geometric_contains(const SkRect& outer, const SkRect& inner) { |
| SkASSERT(!is_inverted(outer) && !is_inverted(inner)); |
| return inner.fRight <= outer.fRight && inner.fLeft >= outer.fLeft && |
| inner.fBottom <= outer.fBottom && inner.fTop >= outer.fTop; |
| } |
| |
| static inline void hairquad(const SkPoint pts[3], const SkRegion* clip, const SkRect* insetClip, const SkRect* outsetClip, |
| SkBlitter* blitter, int level, SkScan::HairRgnProc lineproc) { |
| if (insetClip) { |
| SkASSERT(outsetClip); |
| SkRect bounds = compute_nocheck_quad_bounds(pts); |
| if (!geometric_overlap(*outsetClip, bounds)) { |
| return; |
| } else if (geometric_contains(*insetClip, bounds)) { |
| clip = nullptr; |
| } |
| } |
| |
| hair_quad(pts, clip, blitter, level, lineproc); |
| } |
| |
| static inline Sk2s abs(const Sk2s& value) { |
| return Sk2s::Max(value, Sk2s(0)-value); |
| } |
| |
| static inline SkScalar max_component(const Sk2s& value) { |
| SkScalar components[2]; |
| value.store(components); |
| return SkTMax(components[0], components[1]); |
| } |
| |
| static inline int compute_cubic_segs(const SkPoint pts[4]) { |
| Sk2s p0 = from_point(pts[0]); |
| Sk2s p1 = from_point(pts[1]); |
| Sk2s p2 = from_point(pts[2]); |
| Sk2s p3 = from_point(pts[3]); |
| |
| const Sk2s oneThird(1.0f / 3.0f); |
| const Sk2s twoThird(2.0f / 3.0f); |
| |
| Sk2s p13 = oneThird * p3 + twoThird * p0; |
| Sk2s p23 = oneThird * p0 + twoThird * p3; |
| |
| SkScalar diff = max_component(Sk2s::Max(abs(p1 - p13), abs(p2 - p23))); |
| SkScalar tol = SK_Scalar1 / 8; |
| |
| for (int i = 0; i < kMaxCubicSubdivideLevel; ++i) { |
| if (diff < tol) { |
| return 1 << i; |
| } |
| tol *= 4; |
| } |
| return 1 << kMaxCubicSubdivideLevel; |
| } |
| |
| static bool lt_90(SkPoint p0, SkPoint pivot, SkPoint p2) { |
| return SkVector::DotProduct(p0 - pivot, p2 - pivot) >= 0; |
| } |
| |
| // The off-curve points are "inside" the limits of the on-curve pts |
| static bool quick_cubic_niceness_check(const SkPoint pts[4]) { |
| return lt_90(pts[1], pts[0], pts[3]) && |
| lt_90(pts[2], pts[0], pts[3]) && |
| lt_90(pts[1], pts[3], pts[0]) && |
| lt_90(pts[2], pts[3], pts[0]); |
| } |
| |
| static void hair_cubic(const SkPoint pts[4], const SkRegion* clip, SkBlitter* blitter, |
| SkScan::HairRgnProc lineproc) { |
| const int lines = compute_cubic_segs(pts); |
| SkASSERT(lines > 0); |
| if (1 == lines) { |
| SkPoint tmp[2] = { pts[0], pts[3] }; |
| lineproc(tmp, 2, clip, blitter); |
| return; |
| } |
| |
| SkCubicCoeff coeff(pts); |
| |
| const Sk2s dt(SK_Scalar1 / lines); |
| Sk2s t(0); |
| |
| SkPoint tmp[(1 << kMaxCubicSubdivideLevel) + 1]; |
| SkASSERT((unsigned)lines < SK_ARRAY_COUNT(tmp)); |
| |
| tmp[0] = pts[0]; |
| Sk2s A = coeff.fA; |
| Sk2s B = coeff.fB; |
| Sk2s C = coeff.fC; |
| Sk2s D = coeff.fD; |
| for (int i = 1; i < lines; ++i) { |
| t = t + dt; |
| (((A * t + B) * t + C) * t + D).store(&tmp[i]); |
| } |
| tmp[lines] = pts[3]; |
| lineproc(tmp, lines + 1, clip, blitter); |
| } |
| |
| static SkRect compute_nocheck_cubic_bounds(const SkPoint pts[4]) { |
| SkASSERT(SkScalarsAreFinite(&pts[0].fX, 8)); |
| |
| Sk2s min = Sk2s::Load(pts); |
| Sk2s max = min; |
| for (int i = 1; i < 4; ++i) { |
| Sk2s pair = Sk2s::Load(pts+i); |
| min = Sk2s::Min(min, pair); |
| max = Sk2s::Max(max, pair); |
| } |
| return { min[0], min[1], max[0], max[1] }; |
| } |
| |
| static inline void haircubic(const SkPoint pts[4], const SkRegion* clip, const SkRect* insetClip, const SkRect* outsetClip, |
| SkBlitter* blitter, int level, SkScan::HairRgnProc lineproc) { |
| if (insetClip) { |
| SkASSERT(outsetClip); |
| SkRect bounds = compute_nocheck_cubic_bounds(pts); |
| if (!geometric_overlap(*outsetClip, bounds)) { |
| return; |
| } else if (geometric_contains(*insetClip, bounds)) { |
| clip = nullptr; |
| } |
| } |
| |
| if (quick_cubic_niceness_check(pts)) { |
| hair_cubic(pts, clip, blitter, lineproc); |
| } else { |
| SkPoint tmp[13]; |
| SkScalar tValues[3]; |
| |
| int count = SkChopCubicAtMaxCurvature(pts, tmp, tValues); |
| for (int i = 0; i < count; i++) { |
| hair_cubic(&tmp[i * 3], clip, blitter, lineproc); |
| } |
| } |
| } |
| |
| static int compute_quad_level(const SkPoint pts[3]) { |
| int d = compute_int_quad_dist(pts); |
| /* quadratics approach the line connecting their start and end points |
| 4x closer with each subdivision, so we compute the number of |
| subdivisions to be the minimum need to get that distance to be less |
| than a pixel. |
| */ |
| int level = (33 - SkCLZ(d)) >> 1; |
| // sanity check on level (from the previous version) |
| if (level > kMaxQuadSubdivideLevel) { |
| level = kMaxQuadSubdivideLevel; |
| } |
| return level; |
| } |
| |
| /* Extend the points in the direction of the starting or ending tangent by 1/2 unit to |
| account for a round or square cap. If there's no distance between the end point and |
| the control point, use the next control point to create a tangent. If the curve |
| is degenerate, move the cap out 1/2 unit horizontally. */ |
| template <SkPaint::Cap capStyle> |
| void extend_pts(SkPath::Verb prevVerb, SkPath::Verb nextVerb, SkPoint* pts, int ptCount) { |
| SkASSERT(SkPaint::kSquare_Cap == capStyle || SkPaint::kRound_Cap == capStyle); |
| // The area of a circle is PI*R*R. For a unit circle, R=1/2, and the cap covers half of that. |
| const SkScalar capOutset = SkPaint::kSquare_Cap == capStyle ? 0.5f : SK_ScalarPI / 8; |
| if (SkPath::kMove_Verb == prevVerb) { |
| SkPoint* first = pts; |
| SkPoint* ctrl = first; |
| int controls = ptCount - 1; |
| SkVector tangent; |
| do { |
| tangent = *first - *++ctrl; |
| } while (tangent.isZero() && --controls > 0); |
| if (tangent.isZero()) { |
| tangent.set(1, 0); |
| controls = ptCount - 1; // If all points are equal, move all but one |
| } else { |
| tangent.normalize(); |
| } |
| do { // If the end point and control points are equal, loop to move them in tandem. |
| first->fX += tangent.fX * capOutset; |
| first->fY += tangent.fY * capOutset; |
| ++first; |
| } while (++controls < ptCount); |
| } |
| if (SkPath::kMove_Verb == nextVerb || SkPath::kDone_Verb == nextVerb |
| || SkPath::kClose_Verb == nextVerb) { |
| SkPoint* last = &pts[ptCount - 1]; |
| SkPoint* ctrl = last; |
| int controls = ptCount - 1; |
| SkVector tangent; |
| do { |
| tangent = *last - *--ctrl; |
| } while (tangent.isZero() && --controls > 0); |
| if (tangent.isZero()) { |
| tangent.set(-1, 0); |
| controls = ptCount - 1; |
| } else { |
| tangent.normalize(); |
| } |
| do { |
| last->fX += tangent.fX * capOutset; |
| last->fY += tangent.fY * capOutset; |
| --last; |
| } while (++controls < ptCount); |
| } |
| } |
| |
| template <SkPaint::Cap capStyle> |
| void hair_path(const SkPath& path, const SkRasterClip& rclip, SkBlitter* blitter, |
| SkScan::HairRgnProc lineproc) { |
| if (path.isEmpty()) { |
| return; |
| } |
| |
| SkAAClipBlitterWrapper wrap; |
| const SkRegion* clip = nullptr; |
| SkRect insetStorage, outsetStorage; |
| const SkRect* insetClip = nullptr; |
| const SkRect* outsetClip = nullptr; |
| |
| { |
| const int capOut = SkPaint::kButt_Cap == capStyle ? 1 : 2; |
| const SkIRect ibounds = path.getBounds().roundOut().makeOutset(capOut, capOut); |
| if (rclip.quickReject(ibounds)) { |
| return; |
| } |
| if (!rclip.quickContains(ibounds)) { |
| if (rclip.isBW()) { |
| clip = &rclip.bwRgn(); |
| } else { |
| wrap.init(rclip, blitter); |
| blitter = wrap.getBlitter(); |
| clip = &wrap.getRgn(); |
| } |
| |
| /* |
| * We now cache two scalar rects, to use for culling per-segment (e.g. cubic). |
| * Since we're hairlining, the "bounds" of the control points isn't necessairly the |
| * limit of where a segment can draw (it might draw up to 1 pixel beyond in aa-hairs). |
| * |
| * Compute the pt-bounds per segment is easy, so we do that, and then inversely adjust |
| * the culling bounds so we can just do a straight compare per segment. |
| * |
| * insetClip is use for quick-accept (i.e. the segment is not clipped), so we inset |
| * it from the clip-bounds (since segment bounds can be off by 1). |
| * |
| * outsetClip is used for quick-reject (i.e. the segment is entirely outside), so we |
| * outset it from the clip-bounds. |
| */ |
| insetStorage.set(clip->getBounds()); |
| outsetStorage = insetStorage.makeOutset(1, 1); |
| insetStorage.inset(1, 1); |
| if (is_inverted(insetStorage)) { |
| /* |
| * our bounds checks assume the rects are never inverted. If insetting has |
| * created that, we assume that the area is too small to safely perform a |
| * quick-accept, so we just mark the rect as empty (so the quick-accept check |
| * will always fail. |
| */ |
| insetStorage.setEmpty(); // just so we don't pass an inverted rect |
| } |
| if (rclip.isRect()) { |
| insetClip = &insetStorage; |
| } |
| outsetClip = &outsetStorage; |
| } |
| } |
| |
| SkPath::RawIter iter(path); |
| SkPoint pts[4], firstPt, lastPt; |
| SkPath::Verb verb, prevVerb; |
| SkAutoConicToQuads converter; |
| |
| if (SkPaint::kButt_Cap != capStyle) { |
| prevVerb = SkPath::kDone_Verb; |
| } |
| while ((verb = iter.next(pts)) != SkPath::kDone_Verb) { |
| switch (verb) { |
| case SkPath::kMove_Verb: |
| firstPt = lastPt = pts[0]; |
| break; |
| case SkPath::kLine_Verb: |
| if (SkPaint::kButt_Cap != capStyle) { |
| extend_pts<capStyle>(prevVerb, iter.peek(), pts, 2); |
| } |
| lineproc(pts, 2, clip, blitter); |
| lastPt = pts[1]; |
| break; |
| case SkPath::kQuad_Verb: |
| if (SkPaint::kButt_Cap != capStyle) { |
| extend_pts<capStyle>(prevVerb, iter.peek(), pts, 3); |
| } |
| hairquad(pts, clip, insetClip, outsetClip, blitter, compute_quad_level(pts), lineproc); |
| lastPt = pts[2]; |
| break; |
| case SkPath::kConic_Verb: { |
| if (SkPaint::kButt_Cap != capStyle) { |
| extend_pts<capStyle>(prevVerb, iter.peek(), pts, 3); |
| } |
| // how close should the quads be to the original conic? |
| const SkScalar tol = SK_Scalar1 / 4; |
| const SkPoint* quadPts = converter.computeQuads(pts, |
| iter.conicWeight(), tol); |
| for (int i = 0; i < converter.countQuads(); ++i) { |
| int level = compute_quad_level(quadPts); |
| hairquad(quadPts, clip, insetClip, outsetClip, blitter, level, lineproc); |
| quadPts += 2; |
| } |
| lastPt = pts[2]; |
| break; |
| } |
| case SkPath::kCubic_Verb: { |
| if (SkPaint::kButt_Cap != capStyle) { |
| extend_pts<capStyle>(prevVerb, iter.peek(), pts, 4); |
| } |
| haircubic(pts, clip, insetClip, outsetClip, blitter, kMaxCubicSubdivideLevel, lineproc); |
| lastPt = pts[3]; |
| } break; |
| case SkPath::kClose_Verb: |
| pts[0] = lastPt; |
| pts[1] = firstPt; |
| if (SkPaint::kButt_Cap != capStyle && prevVerb == SkPath::kMove_Verb) { |
| // cap moveTo/close to match svg expectations for degenerate segments |
| extend_pts<capStyle>(prevVerb, iter.peek(), pts, 2); |
| } |
| lineproc(pts, 2, clip, blitter); |
| break; |
| case SkPath::kDone_Verb: |
| break; |
| } |
| if (SkPaint::kButt_Cap != capStyle) { |
| if (prevVerb == SkPath::kMove_Verb && |
| verb >= SkPath::kLine_Verb && verb <= SkPath::kCubic_Verb) { |
| firstPt = pts[0]; // the curve moved the initial point, so close to it instead |
| } |
| prevVerb = verb; |
| } |
| } |
| } |
| |
| void SkScan::HairPath(const SkPath& path, const SkRasterClip& clip, SkBlitter* blitter) { |
| hair_path<SkPaint::kButt_Cap>(path, clip, blitter, SkScan::HairLineRgn); |
| } |
| |
| void SkScan::AntiHairPath(const SkPath& path, const SkRasterClip& clip, SkBlitter* blitter) { |
| hair_path<SkPaint::kButt_Cap>(path, clip, blitter, SkScan::AntiHairLineRgn); |
| } |
| |
| void SkScan::HairSquarePath(const SkPath& path, const SkRasterClip& clip, SkBlitter* blitter) { |
| hair_path<SkPaint::kSquare_Cap>(path, clip, blitter, SkScan::HairLineRgn); |
| } |
| |
| void SkScan::AntiHairSquarePath(const SkPath& path, const SkRasterClip& clip, SkBlitter* blitter) { |
| hair_path<SkPaint::kSquare_Cap>(path, clip, blitter, SkScan::AntiHairLineRgn); |
| } |
| |
| void SkScan::HairRoundPath(const SkPath& path, const SkRasterClip& clip, SkBlitter* blitter) { |
| hair_path<SkPaint::kRound_Cap>(path, clip, blitter, SkScan::HairLineRgn); |
| } |
| |
| void SkScan::AntiHairRoundPath(const SkPath& path, const SkRasterClip& clip, SkBlitter* blitter) { |
| hair_path<SkPaint::kRound_Cap>(path, clip, blitter, SkScan::AntiHairLineRgn); |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| void SkScan::FrameRect(const SkRect& r, const SkPoint& strokeSize, |
| const SkRasterClip& clip, SkBlitter* blitter) { |
| SkASSERT(strokeSize.fX >= 0 && strokeSize.fY >= 0); |
| |
| if (strokeSize.fX < 0 || strokeSize.fY < 0) { |
| return; |
| } |
| |
| const SkScalar dx = strokeSize.fX; |
| const SkScalar dy = strokeSize.fY; |
| SkScalar rx = SkScalarHalf(dx); |
| SkScalar ry = SkScalarHalf(dy); |
| SkRect outer, tmp; |
| |
| outer.set(r.fLeft - rx, r.fTop - ry, |
| r.fRight + rx, r.fBottom + ry); |
| |
| if (r.width() <= dx || r.height() <= dy) { |
| SkScan::FillRect(outer, clip, blitter); |
| return; |
| } |
| |
| tmp.set(outer.fLeft, outer.fTop, outer.fRight, outer.fTop + dy); |
| SkScan::FillRect(tmp, clip, blitter); |
| tmp.fTop = outer.fBottom - dy; |
| tmp.fBottom = outer.fBottom; |
| SkScan::FillRect(tmp, clip, blitter); |
| |
| tmp.set(outer.fLeft, outer.fTop + dy, outer.fLeft + dx, outer.fBottom - dy); |
| SkScan::FillRect(tmp, clip, blitter); |
| tmp.fLeft = outer.fRight - dx; |
| tmp.fRight = outer.fRight; |
| SkScan::FillRect(tmp, clip, blitter); |
| } |
| |
| void SkScan::HairLine(const SkPoint pts[], int count, const SkRasterClip& clip, |
| SkBlitter* blitter) { |
| if (clip.isBW()) { |
| HairLineRgn(pts, count, &clip.bwRgn(), blitter); |
| } else { |
| const SkRegion* clipRgn = nullptr; |
| |
| SkRect r; |
| r.set(pts, count); |
| r.outset(SK_ScalarHalf, SK_ScalarHalf); |
| |
| SkAAClipBlitterWrapper wrap; |
| if (!clip.quickContains(r.roundOut())) { |
| wrap.init(clip, blitter); |
| blitter = wrap.getBlitter(); |
| clipRgn = &wrap.getRgn(); |
| } |
| HairLineRgn(pts, count, clipRgn, blitter); |
| } |
| } |
| |
| void SkScan::AntiHairLine(const SkPoint pts[], int count, const SkRasterClip& clip, |
| SkBlitter* blitter) { |
| if (clip.isBW()) { |
| AntiHairLineRgn(pts, count, &clip.bwRgn(), blitter); |
| } else { |
| const SkRegion* clipRgn = nullptr; |
| |
| SkRect r; |
| r.set(pts, count); |
| |
| SkAAClipBlitterWrapper wrap; |
| if (!clip.quickContains(r.roundOut().makeOutset(1, 1))) { |
| wrap.init(clip, blitter); |
| blitter = wrap.getBlitter(); |
| clipRgn = &wrap.getRgn(); |
| } |
| AntiHairLineRgn(pts, count, clipRgn, blitter); |
| } |
| } |