| /* |
| ******************************************************************************* |
| * |
| * Copyright (C) 1999-2015, International Business Machines |
| * Corporation and others. All Rights Reserved. |
| * |
| ******************************************************************************* |
| * file name: collationweights.cpp |
| * encoding: US-ASCII |
| * tab size: 8 (not used) |
| * indentation:4 |
| * |
| * created on: 2001mar08 as ucol_wgt.cpp |
| * created by: Markus W. Scherer |
| * |
| * This file contains code for allocating n collation element weights |
| * between two exclusive limits. |
| * It is used only internally by the collation tailoring builder. |
| */ |
| |
| #include "unicode/utypes.h" |
| |
| #if !UCONFIG_NO_COLLATION |
| |
| #include "starboard/client_porting/poem/assert_poem.h" |
| #include "starboard/client_porting/poem/string_poem.h" |
| #include "cmemory.h" |
| #include "collation.h" |
| #include "collationweights.h" |
| #include "uarrsort.h" |
| #include "uassert.h" |
| |
| #ifdef UCOL_DEBUG |
| # include <stdio.h> |
| #endif |
| |
| U_NAMESPACE_BEGIN |
| |
| /* collation element weight allocation -------------------------------------- */ |
| |
| /* helper functions for CE weights */ |
| |
| static inline uint32_t |
| getWeightTrail(uint32_t weight, int32_t length) { |
| return (uint32_t)(weight>>(8*(4-length)))&0xff; |
| } |
| |
| static inline uint32_t |
| setWeightTrail(uint32_t weight, int32_t length, uint32_t trail) { |
| length=8*(4-length); |
| return (uint32_t)((weight&(0xffffff00<<length))|(trail<<length)); |
| } |
| |
| static inline uint32_t |
| getWeightByte(uint32_t weight, int32_t idx) { |
| return getWeightTrail(weight, idx); /* same calculation */ |
| } |
| |
| static inline uint32_t |
| setWeightByte(uint32_t weight, int32_t idx, uint32_t byte) { |
| uint32_t mask; /* 0xffffffff except a 00 "hole" for the index-th byte */ |
| |
| idx*=8; |
| if(idx<32) { |
| mask=((uint32_t)0xffffffff)>>idx; |
| } else { |
| // Do not use uint32_t>>32 because on some platforms that does not shift at all |
| // while we need it to become 0. |
| // PowerPC: 0xffffffff>>32 = 0 (wanted) |
| // x86: 0xffffffff>>32 = 0xffffffff (not wanted) |
| // |
| // ANSI C99 6.5.7 Bitwise shift operators: |
| // "If the value of the right operand is negative |
| // or is greater than or equal to the width of the promoted left operand, |
| // the behavior is undefined." |
| mask=0; |
| } |
| idx=32-idx; |
| mask|=0xffffff00<<idx; |
| return (uint32_t)((weight&mask)|(byte<<idx)); |
| } |
| |
| static inline uint32_t |
| truncateWeight(uint32_t weight, int32_t length) { |
| return (uint32_t)(weight&(0xffffffff<<(8*(4-length)))); |
| } |
| |
| static inline uint32_t |
| incWeightTrail(uint32_t weight, int32_t length) { |
| return (uint32_t)(weight+(1UL<<(8*(4-length)))); |
| } |
| |
| static inline uint32_t |
| decWeightTrail(uint32_t weight, int32_t length) { |
| return (uint32_t)(weight-(1UL<<(8*(4-length)))); |
| } |
| |
| CollationWeights::CollationWeights() |
| : middleLength(0), rangeIndex(0), rangeCount(0) { |
| for(int32_t i = 0; i < 5; ++i) { |
| minBytes[i] = maxBytes[i] = 0; |
| } |
| } |
| |
| void |
| CollationWeights::initForPrimary(UBool compressible) { |
| middleLength=1; |
| minBytes[1] = Collation::MERGE_SEPARATOR_BYTE + 1; |
| maxBytes[1] = Collation::TRAIL_WEIGHT_BYTE; |
| if(compressible) { |
| minBytes[2] = Collation::PRIMARY_COMPRESSION_LOW_BYTE + 1; |
| maxBytes[2] = Collation::PRIMARY_COMPRESSION_HIGH_BYTE - 1; |
| } else { |
| minBytes[2] = 2; |
| maxBytes[2] = 0xff; |
| } |
| minBytes[3] = 2; |
| maxBytes[3] = 0xff; |
| minBytes[4] = 2; |
| maxBytes[4] = 0xff; |
| } |
| |
| void |
| CollationWeights::initForSecondary() { |
| // We use only the lower 16 bits for secondary weights. |
| middleLength=3; |
| minBytes[1] = 0; |
| maxBytes[1] = 0; |
| minBytes[2] = 0; |
| maxBytes[2] = 0; |
| minBytes[3] = Collation::LEVEL_SEPARATOR_BYTE + 1; |
| maxBytes[3] = 0xff; |
| minBytes[4] = 2; |
| maxBytes[4] = 0xff; |
| } |
| |
| void |
| CollationWeights::initForTertiary() { |
| // We use only the lower 16 bits for tertiary weights. |
| middleLength=3; |
| minBytes[1] = 0; |
| maxBytes[1] = 0; |
| minBytes[2] = 0; |
| maxBytes[2] = 0; |
| // We use only 6 bits per byte. |
| // The other bits are used for case & quaternary weights. |
| minBytes[3] = Collation::LEVEL_SEPARATOR_BYTE + 1; |
| maxBytes[3] = 0x3f; |
| minBytes[4] = 2; |
| maxBytes[4] = 0x3f; |
| } |
| |
| uint32_t |
| CollationWeights::incWeight(uint32_t weight, int32_t length) const { |
| for(;;) { |
| uint32_t byte=getWeightByte(weight, length); |
| if(byte<maxBytes[length]) { |
| return setWeightByte(weight, length, byte+1); |
| } else { |
| // Roll over, set this byte to the minimum and increment the previous one. |
| weight=setWeightByte(weight, length, minBytes[length]); |
| --length; |
| U_ASSERT(length > 0); |
| } |
| } |
| } |
| |
| uint32_t |
| CollationWeights::incWeightByOffset(uint32_t weight, int32_t length, int32_t offset) const { |
| for(;;) { |
| offset += getWeightByte(weight, length); |
| if((uint32_t)offset <= maxBytes[length]) { |
| return setWeightByte(weight, length, offset); |
| } else { |
| // Split the offset between this byte and the previous one. |
| offset -= minBytes[length]; |
| weight = setWeightByte(weight, length, minBytes[length] + offset % countBytes(length)); |
| offset /= countBytes(length); |
| --length; |
| U_ASSERT(length > 0); |
| } |
| } |
| } |
| |
| void |
| CollationWeights::lengthenRange(WeightRange &range) const { |
| int32_t length=range.length+1; |
| range.start=setWeightTrail(range.start, length, minBytes[length]); |
| range.end=setWeightTrail(range.end, length, maxBytes[length]); |
| range.count*=countBytes(length); |
| range.length=length; |
| } |
| |
| /* for uprv_sortArray: sort ranges in weight order */ |
| static int32_t U_CALLCONV |
| compareRanges(const void * /*context*/, const void *left, const void *right) { |
| uint32_t l, r; |
| |
| l=((const CollationWeights::WeightRange *)left)->start; |
| r=((const CollationWeights::WeightRange *)right)->start; |
| if(l<r) { |
| return -1; |
| } else if(l>r) { |
| return 1; |
| } else { |
| return 0; |
| } |
| } |
| |
| UBool |
| CollationWeights::getWeightRanges(uint32_t lowerLimit, uint32_t upperLimit) { |
| U_ASSERT(lowerLimit != 0); |
| U_ASSERT(upperLimit != 0); |
| |
| /* get the lengths of the limits */ |
| int32_t lowerLength=lengthOfWeight(lowerLimit); |
| int32_t upperLength=lengthOfWeight(upperLimit); |
| |
| #ifdef UCOL_DEBUG |
| printf("length of lower limit 0x%08lx is %ld\n", lowerLimit, lowerLength); |
| printf("length of upper limit 0x%08lx is %ld\n", upperLimit, upperLength); |
| #endif |
| U_ASSERT(lowerLength>=middleLength); |
| // Permit upperLength<middleLength: The upper limit for secondaries is 0x10000. |
| |
| if(lowerLimit>=upperLimit) { |
| #ifdef UCOL_DEBUG |
| printf("error: no space between lower & upper limits\n"); |
| #endif |
| return FALSE; |
| } |
| |
| /* check that neither is a prefix of the other */ |
| if(lowerLength<upperLength) { |
| if(lowerLimit==truncateWeight(upperLimit, lowerLength)) { |
| #ifdef UCOL_DEBUG |
| printf("error: lower limit 0x%08lx is a prefix of upper limit 0x%08lx\n", lowerLimit, upperLimit); |
| #endif |
| return FALSE; |
| } |
| } |
| /* if the upper limit is a prefix of the lower limit then the earlier test lowerLimit>=upperLimit has caught it */ |
| |
| WeightRange lower[5], middle, upper[5]; /* [0] and [1] are not used - this simplifies indexing */ |
| uprv_memset(lower, 0, sizeof(lower)); |
| uprv_memset(&middle, 0, sizeof(middle)); |
| uprv_memset(upper, 0, sizeof(upper)); |
| |
| /* |
| * With the limit lengths of 1..4, there are up to 7 ranges for allocation: |
| * range minimum length |
| * lower[4] 4 |
| * lower[3] 3 |
| * lower[2] 2 |
| * middle 1 |
| * upper[2] 2 |
| * upper[3] 3 |
| * upper[4] 4 |
| * |
| * We are now going to calculate up to 7 ranges. |
| * Some of them will typically overlap, so we will then have to merge and eliminate ranges. |
| */ |
| uint32_t weight=lowerLimit; |
| for(int32_t length=lowerLength; length>middleLength; --length) { |
| uint32_t trail=getWeightTrail(weight, length); |
| if(trail<maxBytes[length]) { |
| lower[length].start=incWeightTrail(weight, length); |
| lower[length].end=setWeightTrail(weight, length, maxBytes[length]); |
| lower[length].length=length; |
| lower[length].count=maxBytes[length]-trail; |
| } |
| weight=truncateWeight(weight, length-1); |
| } |
| if(weight<0xff000000) { |
| middle.start=incWeightTrail(weight, middleLength); |
| } else { |
| // Prevent overflow for primary lead byte FF |
| // which would yield a middle range starting at 0. |
| middle.start=0xffffffff; // no middle range |
| } |
| |
| weight=upperLimit; |
| for(int32_t length=upperLength; length>middleLength; --length) { |
| uint32_t trail=getWeightTrail(weight, length); |
| if(trail>minBytes[length]) { |
| upper[length].start=setWeightTrail(weight, length, minBytes[length]); |
| upper[length].end=decWeightTrail(weight, length); |
| upper[length].length=length; |
| upper[length].count=trail-minBytes[length]; |
| } |
| weight=truncateWeight(weight, length-1); |
| } |
| middle.end=decWeightTrail(weight, middleLength); |
| |
| /* set the middle range */ |
| middle.length=middleLength; |
| if(middle.end>=middle.start) { |
| middle.count=(int32_t)((middle.end-middle.start)>>(8*(4-middleLength)))+1; |
| } else { |
| /* no middle range, eliminate overlaps */ |
| for(int32_t length=4; length>middleLength; --length) { |
| if(lower[length].count>0 && upper[length].count>0) { |
| // Note: The lowerEnd and upperStart weights are versions of |
| // lowerLimit and upperLimit (which are lowerLimit<upperLimit), |
| // truncated (still less-or-equal) |
| // and then with their last bytes changed to the |
| // maxByte (for lowerEnd) or minByte (for upperStart). |
| const uint32_t lowerEnd=lower[length].end; |
| const uint32_t upperStart=upper[length].start; |
| UBool merged=FALSE; |
| |
| if(lowerEnd>upperStart) { |
| // These two lower and upper ranges collide. |
| // Since lowerLimit<upperLimit and lowerEnd and upperStart |
| // are versions with only their last bytes modified |
| // (and following ones removed/reset to 0), |
| // lowerEnd>upperStart is only possible |
| // if the leading bytes are equal |
| // and lastByte(lowerEnd)>lastByte(upperStart). |
| U_ASSERT(truncateWeight(lowerEnd, length-1)== |
| truncateWeight(upperStart, length-1)); |
| // Intersect these two ranges. |
| lower[length].end=upper[length].end; |
| lower[length].count= |
| (int32_t)getWeightTrail(lower[length].end, length)- |
| (int32_t)getWeightTrail(lower[length].start, length)+1; |
| // count might be <=0 in which case there is no room, |
| // and the range-collecting code below will ignore this range. |
| merged=TRUE; |
| } else if(lowerEnd==upperStart) { |
| // Not possible, unless minByte==maxByte which is not allowed. |
| U_ASSERT(minBytes[length]<maxBytes[length]); |
| } else /* lowerEnd<upperStart */ { |
| if(incWeight(lowerEnd, length)==upperStart) { |
| // Merge adjacent ranges. |
| lower[length].end=upper[length].end; |
| lower[length].count+=upper[length].count; // might be >countBytes |
| merged=TRUE; |
| } |
| } |
| if(merged) { |
| // Remove all shorter ranges. |
| // There was no room available for them between the ranges we just merged. |
| upper[length].count=0; |
| while(--length>middleLength) { |
| lower[length].count=upper[length].count=0; |
| } |
| break; |
| } |
| } |
| } |
| } |
| |
| #ifdef UCOL_DEBUG |
| /* print ranges */ |
| for(int32_t length=4; length>=2; --length) { |
| if(lower[length].count>0) { |
| printf("lower[%ld] .start=0x%08lx .end=0x%08lx .count=%ld\n", length, lower[length].start, lower[length].end, lower[length].count); |
| } |
| } |
| if(middle.count>0) { |
| printf("middle .start=0x%08lx .end=0x%08lx .count=%ld\n", middle.start, middle.end, middle.count); |
| } |
| for(int32_t length=2; length<=4; ++length) { |
| if(upper[length].count>0) { |
| printf("upper[%ld] .start=0x%08lx .end=0x%08lx .count=%ld\n", length, upper[length].start, upper[length].end, upper[length].count); |
| } |
| } |
| #endif |
| |
| /* copy the ranges, shortest first, into the result array */ |
| rangeCount=0; |
| if(middle.count>0) { |
| uprv_memcpy(ranges, &middle, sizeof(WeightRange)); |
| rangeCount=1; |
| } |
| for(int32_t length=middleLength+1; length<=4; ++length) { |
| /* copy upper first so that later the middle range is more likely the first one to use */ |
| if(upper[length].count>0) { |
| uprv_memcpy(ranges+rangeCount, upper+length, sizeof(WeightRange)); |
| ++rangeCount; |
| } |
| if(lower[length].count>0) { |
| uprv_memcpy(ranges+rangeCount, lower+length, sizeof(WeightRange)); |
| ++rangeCount; |
| } |
| } |
| return rangeCount>0; |
| } |
| |
| UBool |
| CollationWeights::allocWeightsInShortRanges(int32_t n, int32_t minLength) { |
| // See if the first few minLength and minLength+1 ranges have enough weights. |
| for(int32_t i = 0; i < rangeCount && ranges[i].length <= (minLength + 1); ++i) { |
| if(n <= ranges[i].count) { |
| // Use the first few minLength and minLength+1 ranges. |
| if(ranges[i].length > minLength) { |
| // Reduce the number of weights from the last minLength+1 range |
| // which might sort before some minLength ranges, |
| // so that we use all weights in the minLength ranges. |
| ranges[i].count = n; |
| } |
| rangeCount = i + 1; |
| #ifdef UCOL_DEBUG |
| printf("take first %ld ranges\n", rangeCount); |
| #endif |
| |
| if(rangeCount>1) { |
| /* sort the ranges by weight values */ |
| UErrorCode errorCode=U_ZERO_ERROR; |
| uprv_sortArray(ranges, rangeCount, sizeof(WeightRange), |
| compareRanges, NULL, FALSE, &errorCode); |
| /* ignore error code: we know that the internal sort function will not fail here */ |
| } |
| return TRUE; |
| } |
| n -= ranges[i].count; // still >0 |
| } |
| return FALSE; |
| } |
| |
| UBool |
| CollationWeights::allocWeightsInMinLengthRanges(int32_t n, int32_t minLength) { |
| // See if the minLength ranges have enough weights |
| // when we split one and lengthen the following ones. |
| int32_t count = 0; |
| int32_t minLengthRangeCount; |
| for(minLengthRangeCount = 0; |
| minLengthRangeCount < rangeCount && |
| ranges[minLengthRangeCount].length == minLength; |
| ++minLengthRangeCount) { |
| count += ranges[minLengthRangeCount].count; |
| } |
| |
| int32_t nextCountBytes = countBytes(minLength + 1); |
| if(n > count * nextCountBytes) { return FALSE; } |
| |
| // Use the minLength ranges. Merge them, and then split again as necessary. |
| uint32_t start = ranges[0].start; |
| uint32_t end = ranges[0].end; |
| for(int32_t i = 1; i < minLengthRangeCount; ++i) { |
| if(ranges[i].start < start) { start = ranges[i].start; } |
| if(ranges[i].end > end) { end = ranges[i].end; } |
| } |
| |
| // Calculate how to split the range between minLength (count1) and minLength+1 (count2). |
| // Goal: |
| // count1 + count2 * nextCountBytes = n |
| // count1 + count2 = count |
| // These turn into |
| // (count - count2) + count2 * nextCountBytes = n |
| // and then into the following count1 & count2 computations. |
| int32_t count2 = (n - count) / (nextCountBytes - 1); // number of weights to be lengthened |
| int32_t count1 = count - count2; // number of minLength weights |
| if(count2 == 0 || (count1 + count2 * nextCountBytes) < n) { |
| // round up |
| ++count2; |
| --count1; |
| U_ASSERT((count1 + count2 * nextCountBytes) >= n); |
| } |
| |
| ranges[0].start = start; |
| |
| if(count1 == 0) { |
| // Make one long range. |
| ranges[0].end = end; |
| ranges[0].count = count; |
| lengthenRange(ranges[0]); |
| rangeCount = 1; |
| } else { |
| // Split the range, lengthen the second part. |
| #ifdef UCOL_DEBUG |
| printf("split the range number %ld (out of %ld minLength ranges) by %ld:%ld\n", |
| splitRange, rangeCount, count1, count2); |
| #endif |
| |
| // Next start = start + count1. First end = 1 before that. |
| ranges[0].end = incWeightByOffset(start, minLength, count1 - 1); |
| ranges[0].count = count1; |
| |
| ranges[1].start = incWeight(ranges[0].end, minLength); |
| ranges[1].end = end; |
| ranges[1].length = minLength; // +1 when lengthened |
| ranges[1].count = count2; // *countBytes when lengthened |
| lengthenRange(ranges[1]); |
| rangeCount = 2; |
| } |
| return TRUE; |
| } |
| |
| /* |
| * call getWeightRanges and then determine heuristically |
| * which ranges to use for a given number of weights between (excluding) |
| * two limits |
| */ |
| UBool |
| CollationWeights::allocWeights(uint32_t lowerLimit, uint32_t upperLimit, int32_t n) { |
| #ifdef UCOL_DEBUG |
| puts(""); |
| #endif |
| |
| if(!getWeightRanges(lowerLimit, upperLimit)) { |
| #ifdef UCOL_DEBUG |
| printf("error: unable to get Weight ranges\n"); |
| #endif |
| return FALSE; |
| } |
| |
| /* try until we find suitably large ranges */ |
| for(;;) { |
| /* get the smallest number of bytes in a range */ |
| int32_t minLength=ranges[0].length; |
| |
| if(allocWeightsInShortRanges(n, minLength)) { break; } |
| |
| if(minLength == 4) { |
| #ifdef UCOL_DEBUG |
| printf("error: the maximum number of %ld weights is insufficient for n=%ld\n", |
| minLengthCount, n); |
| #endif |
| return FALSE; |
| } |
| |
| if(allocWeightsInMinLengthRanges(n, minLength)) { break; } |
| |
| /* no good match, lengthen all minLength ranges and iterate */ |
| #ifdef UCOL_DEBUG |
| printf("lengthen the short ranges from %ld bytes to %ld and iterate\n", minLength, minLength+1); |
| #endif |
| for(int32_t i=0; ranges[i].length==minLength; ++i) { |
| lengthenRange(ranges[i]); |
| } |
| } |
| |
| #ifdef UCOL_DEBUG |
| puts("final ranges:"); |
| for(int32_t i=0; i<rangeCount; ++i) { |
| printf("ranges[%ld] .start=0x%08lx .end=0x%08lx .length=%ld .count=%ld\n", |
| i, ranges[i].start, ranges[i].end, ranges[i].length, ranges[i].count); |
| } |
| #endif |
| |
| rangeIndex = 0; |
| return TRUE; |
| } |
| |
| uint32_t |
| CollationWeights::nextWeight() { |
| if(rangeIndex >= rangeCount) { |
| return 0xffffffff; |
| } else { |
| /* get the next weight */ |
| WeightRange &range = ranges[rangeIndex]; |
| uint32_t weight = range.start; |
| if(--range.count == 0) { |
| /* this range is finished */ |
| ++rangeIndex; |
| } else { |
| /* increment the weight for the next value */ |
| range.start = incWeight(weight, range.length); |
| U_ASSERT(range.start <= range.end); |
| } |
| |
| return weight; |
| } |
| } |
| |
| U_NAMESPACE_END |
| |
| #endif /* #if !UCONFIG_NO_COLLATION */ |
