| /* Copyright (c) 2010-2011 Xiph.Org Foundation, Skype Limited |
| Written by Jean-Marc Valin and Koen Vos */ |
| /* |
| Redistribution and use in source and binary forms, with or without |
| modification, are permitted provided that the following conditions |
| are met: |
| |
| - Redistributions of source code must retain the above copyright |
| notice, this list of conditions and the following disclaimer. |
| |
| - Redistributions in binary form must reproduce the above copyright |
| notice, this list of conditions and the following disclaimer in the |
| documentation and/or other materials provided with the distribution. |
| |
| THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER |
| OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, |
| EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, |
| PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR |
| PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF |
| LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING |
| NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #ifdef HAVE_CONFIG_H |
| #include "config.h" |
| #endif |
| |
| #include <stdarg.h> |
| #include "celt.h" |
| #include "entenc.h" |
| #include "modes.h" |
| #include "API.h" |
| #include "stack_alloc.h" |
| #include "float_cast.h" |
| #include "opus.h" |
| #include "arch.h" |
| #include "pitch.h" |
| #include "opus_private.h" |
| #include "os_support.h" |
| #include "cpu_support.h" |
| #include "analysis.h" |
| #include "mathops.h" |
| #include "tuning_parameters.h" |
| #ifdef FIXED_POINT |
| #include "fixed/structs_FIX.h" |
| #else |
| #include "float/structs_FLP.h" |
| #endif |
| |
| #define MAX_ENCODER_BUFFER 480 |
| |
| #ifndef DISABLE_FLOAT_API |
| #define PSEUDO_SNR_THRESHOLD 316.23f /* 10^(25/10) */ |
| #endif |
| |
| typedef struct { |
| opus_val32 XX, XY, YY; |
| opus_val16 smoothed_width; |
| opus_val16 max_follower; |
| } StereoWidthState; |
| |
| struct OpusEncoder { |
| int celt_enc_offset; |
| int silk_enc_offset; |
| silk_EncControlStruct silk_mode; |
| int application; |
| int channels; |
| int delay_compensation; |
| int force_channels; |
| int signal_type; |
| int user_bandwidth; |
| int max_bandwidth; |
| int user_forced_mode; |
| int voice_ratio; |
| opus_int32 Fs; |
| int use_vbr; |
| int vbr_constraint; |
| int variable_duration; |
| opus_int32 bitrate_bps; |
| opus_int32 user_bitrate_bps; |
| int lsb_depth; |
| int encoder_buffer; |
| int lfe; |
| int arch; |
| int use_dtx; /* general DTX for both SILK and CELT */ |
| #ifndef DISABLE_FLOAT_API |
| TonalityAnalysisState analysis; |
| #endif |
| |
| #define OPUS_ENCODER_RESET_START stream_channels |
| int stream_channels; |
| opus_int16 hybrid_stereo_width_Q14; |
| opus_int32 variable_HP_smth2_Q15; |
| opus_val16 prev_HB_gain; |
| opus_val32 hp_mem[4]; |
| int mode; |
| int prev_mode; |
| int prev_channels; |
| int prev_framesize; |
| int bandwidth; |
| /* Bandwidth determined automatically from the rate (before any other adjustment) */ |
| int auto_bandwidth; |
| int silk_bw_switch; |
| /* Sampling rate (at the API level) */ |
| int first; |
| opus_val16 * energy_masking; |
| StereoWidthState width_mem; |
| opus_val16 delay_buffer[MAX_ENCODER_BUFFER*2]; |
| #ifndef DISABLE_FLOAT_API |
| int detected_bandwidth; |
| int nb_no_activity_frames; |
| opus_val32 peak_signal_energy; |
| #endif |
| int nonfinal_frame; /* current frame is not the final in a packet */ |
| opus_uint32 rangeFinal; |
| }; |
| |
| /* Transition tables for the voice and music. First column is the |
| middle (memoriless) threshold. The second column is the hysteresis |
| (difference with the middle) */ |
| static const opus_int32 mono_voice_bandwidth_thresholds[8] = { |
| 9000, 700, /* NB<->MB */ |
| 9000, 700, /* MB<->WB */ |
| 13500, 1000, /* WB<->SWB */ |
| 14000, 2000, /* SWB<->FB */ |
| }; |
| static const opus_int32 mono_music_bandwidth_thresholds[8] = { |
| 9000, 700, /* NB<->MB */ |
| 9000, 700, /* MB<->WB */ |
| 11000, 1000, /* WB<->SWB */ |
| 12000, 2000, /* SWB<->FB */ |
| }; |
| static const opus_int32 stereo_voice_bandwidth_thresholds[8] = { |
| 9000, 700, /* NB<->MB */ |
| 9000, 700, /* MB<->WB */ |
| 13500, 1000, /* WB<->SWB */ |
| 14000, 2000, /* SWB<->FB */ |
| }; |
| static const opus_int32 stereo_music_bandwidth_thresholds[8] = { |
| 9000, 700, /* NB<->MB */ |
| 9000, 700, /* MB<->WB */ |
| 11000, 1000, /* WB<->SWB */ |
| 12000, 2000, /* SWB<->FB */ |
| }; |
| /* Threshold bit-rates for switching between mono and stereo */ |
| static const opus_int32 stereo_voice_threshold = 19000; |
| static const opus_int32 stereo_music_threshold = 17000; |
| |
| /* Threshold bit-rate for switching between SILK/hybrid and CELT-only */ |
| static const opus_int32 mode_thresholds[2][2] = { |
| /* voice */ /* music */ |
| { 64000, 10000}, /* mono */ |
| { 44000, 10000}, /* stereo */ |
| }; |
| |
| static const opus_int32 fec_thresholds[] = { |
| 12000, 1000, /* NB */ |
| 14000, 1000, /* MB */ |
| 16000, 1000, /* WB */ |
| 20000, 1000, /* SWB */ |
| 22000, 1000, /* FB */ |
| }; |
| |
| int opus_encoder_get_size(int channels) |
| { |
| int silkEncSizeBytes, celtEncSizeBytes; |
| int ret; |
| if (channels<1 || channels > 2) |
| return 0; |
| ret = silk_Get_Encoder_Size( &silkEncSizeBytes ); |
| if (ret) |
| return 0; |
| silkEncSizeBytes = align(silkEncSizeBytes); |
| celtEncSizeBytes = celt_encoder_get_size(channels); |
| return align(sizeof(OpusEncoder))+silkEncSizeBytes+celtEncSizeBytes; |
| } |
| |
| int opus_encoder_init(OpusEncoder* st, opus_int32 Fs, int channels, int application) |
| { |
| void *silk_enc; |
| CELTEncoder *celt_enc; |
| int err; |
| int ret, silkEncSizeBytes; |
| |
| if((Fs!=48000&&Fs!=24000&&Fs!=16000&&Fs!=12000&&Fs!=8000)||(channels!=1&&channels!=2)|| |
| (application != OPUS_APPLICATION_VOIP && application != OPUS_APPLICATION_AUDIO |
| && application != OPUS_APPLICATION_RESTRICTED_LOWDELAY)) |
| return OPUS_BAD_ARG; |
| |
| OPUS_CLEAR((char*)st, opus_encoder_get_size(channels)); |
| /* Create SILK encoder */ |
| ret = silk_Get_Encoder_Size( &silkEncSizeBytes ); |
| if (ret) |
| return OPUS_BAD_ARG; |
| silkEncSizeBytes = align(silkEncSizeBytes); |
| st->silk_enc_offset = align(sizeof(OpusEncoder)); |
| st->celt_enc_offset = st->silk_enc_offset+silkEncSizeBytes; |
| silk_enc = (char*)st+st->silk_enc_offset; |
| celt_enc = (CELTEncoder*)((char*)st+st->celt_enc_offset); |
| |
| st->stream_channels = st->channels = channels; |
| |
| st->Fs = Fs; |
| |
| st->arch = opus_select_arch(); |
| |
| ret = silk_InitEncoder( silk_enc, st->arch, &st->silk_mode ); |
| if(ret)return OPUS_INTERNAL_ERROR; |
| |
| /* default SILK parameters */ |
| st->silk_mode.nChannelsAPI = channels; |
| st->silk_mode.nChannelsInternal = channels; |
| st->silk_mode.API_sampleRate = st->Fs; |
| st->silk_mode.maxInternalSampleRate = 16000; |
| st->silk_mode.minInternalSampleRate = 8000; |
| st->silk_mode.desiredInternalSampleRate = 16000; |
| st->silk_mode.payloadSize_ms = 20; |
| st->silk_mode.bitRate = 25000; |
| st->silk_mode.packetLossPercentage = 0; |
| st->silk_mode.complexity = 9; |
| st->silk_mode.useInBandFEC = 0; |
| st->silk_mode.useDTX = 0; |
| st->silk_mode.useCBR = 0; |
| st->silk_mode.reducedDependency = 0; |
| |
| /* Create CELT encoder */ |
| /* Initialize CELT encoder */ |
| err = celt_encoder_init(celt_enc, Fs, channels, st->arch); |
| if(err!=OPUS_OK)return OPUS_INTERNAL_ERROR; |
| |
| celt_encoder_ctl(celt_enc, CELT_SET_SIGNALLING(0)); |
| celt_encoder_ctl(celt_enc, OPUS_SET_COMPLEXITY(st->silk_mode.complexity)); |
| |
| st->use_vbr = 1; |
| /* Makes constrained VBR the default (safer for real-time use) */ |
| st->vbr_constraint = 1; |
| st->user_bitrate_bps = OPUS_AUTO; |
| st->bitrate_bps = 3000+Fs*channels; |
| st->application = application; |
| st->signal_type = OPUS_AUTO; |
| st->user_bandwidth = OPUS_AUTO; |
| st->max_bandwidth = OPUS_BANDWIDTH_FULLBAND; |
| st->force_channels = OPUS_AUTO; |
| st->user_forced_mode = OPUS_AUTO; |
| st->voice_ratio = -1; |
| st->encoder_buffer = st->Fs/100; |
| st->lsb_depth = 24; |
| st->variable_duration = OPUS_FRAMESIZE_ARG; |
| |
| /* Delay compensation of 4 ms (2.5 ms for SILK's extra look-ahead |
| + 1.5 ms for SILK resamplers and stereo prediction) */ |
| st->delay_compensation = st->Fs/250; |
| |
| st->hybrid_stereo_width_Q14 = 1 << 14; |
| st->prev_HB_gain = Q15ONE; |
| st->variable_HP_smth2_Q15 = silk_LSHIFT( silk_lin2log( VARIABLE_HP_MIN_CUTOFF_HZ ), 8 ); |
| st->first = 1; |
| st->mode = MODE_HYBRID; |
| st->bandwidth = OPUS_BANDWIDTH_FULLBAND; |
| |
| #ifndef DISABLE_FLOAT_API |
| tonality_analysis_init(&st->analysis, st->Fs); |
| st->analysis.application = st->application; |
| #endif |
| |
| return OPUS_OK; |
| } |
| |
| static unsigned char gen_toc(int mode, int framerate, int bandwidth, int channels) |
| { |
| int period; |
| unsigned char toc; |
| period = 0; |
| while (framerate < 400) |
| { |
| framerate <<= 1; |
| period++; |
| } |
| if (mode == MODE_SILK_ONLY) |
| { |
| toc = (bandwidth-OPUS_BANDWIDTH_NARROWBAND)<<5; |
| toc |= (period-2)<<3; |
| } else if (mode == MODE_CELT_ONLY) |
| { |
| int tmp = bandwidth-OPUS_BANDWIDTH_MEDIUMBAND; |
| if (tmp < 0) |
| tmp = 0; |
| toc = 0x80; |
| toc |= tmp << 5; |
| toc |= period<<3; |
| } else /* Hybrid */ |
| { |
| toc = 0x60; |
| toc |= (bandwidth-OPUS_BANDWIDTH_SUPERWIDEBAND)<<4; |
| toc |= (period-2)<<3; |
| } |
| toc |= (channels==2)<<2; |
| return toc; |
| } |
| |
| #ifndef FIXED_POINT |
| static void silk_biquad_float( |
| const opus_val16 *in, /* I: Input signal */ |
| const opus_int32 *B_Q28, /* I: MA coefficients [3] */ |
| const opus_int32 *A_Q28, /* I: AR coefficients [2] */ |
| opus_val32 *S, /* I/O: State vector [2] */ |
| opus_val16 *out, /* O: Output signal */ |
| const opus_int32 len, /* I: Signal length (must be even) */ |
| int stride |
| ) |
| { |
| /* DIRECT FORM II TRANSPOSED (uses 2 element state vector) */ |
| opus_int k; |
| opus_val32 vout; |
| opus_val32 inval; |
| opus_val32 A[2], B[3]; |
| |
| A[0] = (opus_val32)(A_Q28[0] * (1.f/((opus_int32)1<<28))); |
| A[1] = (opus_val32)(A_Q28[1] * (1.f/((opus_int32)1<<28))); |
| B[0] = (opus_val32)(B_Q28[0] * (1.f/((opus_int32)1<<28))); |
| B[1] = (opus_val32)(B_Q28[1] * (1.f/((opus_int32)1<<28))); |
| B[2] = (opus_val32)(B_Q28[2] * (1.f/((opus_int32)1<<28))); |
| |
| /* Negate A_Q28 values and split in two parts */ |
| |
| for( k = 0; k < len; k++ ) { |
| /* S[ 0 ], S[ 1 ]: Q12 */ |
| inval = in[ k*stride ]; |
| vout = S[ 0 ] + B[0]*inval; |
| |
| S[ 0 ] = S[1] - vout*A[0] + B[1]*inval; |
| |
| S[ 1 ] = - vout*A[1] + B[2]*inval + VERY_SMALL; |
| |
| /* Scale back to Q0 and saturate */ |
| out[ k*stride ] = vout; |
| } |
| } |
| #endif |
| |
| static void hp_cutoff(const opus_val16 *in, opus_int32 cutoff_Hz, opus_val16 *out, opus_val32 *hp_mem, int len, int channels, opus_int32 Fs, int arch) |
| { |
| opus_int32 B_Q28[ 3 ], A_Q28[ 2 ]; |
| opus_int32 Fc_Q19, r_Q28, r_Q22; |
| (void)arch; |
| |
| silk_assert( cutoff_Hz <= silk_int32_MAX / SILK_FIX_CONST( 1.5 * 3.14159 / 1000, 19 ) ); |
| Fc_Q19 = silk_DIV32_16( silk_SMULBB( SILK_FIX_CONST( 1.5 * 3.14159 / 1000, 19 ), cutoff_Hz ), Fs/1000 ); |
| silk_assert( Fc_Q19 > 0 && Fc_Q19 < 32768 ); |
| |
| r_Q28 = SILK_FIX_CONST( 1.0, 28 ) - silk_MUL( SILK_FIX_CONST( 0.92, 9 ), Fc_Q19 ); |
| |
| /* b = r * [ 1; -2; 1 ]; */ |
| /* a = [ 1; -2 * r * ( 1 - 0.5 * Fc^2 ); r^2 ]; */ |
| B_Q28[ 0 ] = r_Q28; |
| B_Q28[ 1 ] = silk_LSHIFT( -r_Q28, 1 ); |
| B_Q28[ 2 ] = r_Q28; |
| |
| /* -r * ( 2 - Fc * Fc ); */ |
| r_Q22 = silk_RSHIFT( r_Q28, 6 ); |
| A_Q28[ 0 ] = silk_SMULWW( r_Q22, silk_SMULWW( Fc_Q19, Fc_Q19 ) - SILK_FIX_CONST( 2.0, 22 ) ); |
| A_Q28[ 1 ] = silk_SMULWW( r_Q22, r_Q22 ); |
| |
| #ifdef FIXED_POINT |
| if( channels == 1 ) { |
| silk_biquad_alt_stride1( in, B_Q28, A_Q28, hp_mem, out, len ); |
| } else { |
| silk_biquad_alt_stride2( in, B_Q28, A_Q28, hp_mem, out, len, arch ); |
| } |
| #else |
| silk_biquad_float( in, B_Q28, A_Q28, hp_mem, out, len, channels ); |
| if( channels == 2 ) { |
| silk_biquad_float( in+1, B_Q28, A_Q28, hp_mem+2, out+1, len, channels ); |
| } |
| #endif |
| } |
| |
| #ifdef FIXED_POINT |
| static void dc_reject(const opus_val16 *in, opus_int32 cutoff_Hz, opus_val16 *out, opus_val32 *hp_mem, int len, int channels, opus_int32 Fs) |
| { |
| int c, i; |
| int shift; |
| |
| /* Approximates -round(log2(6.3*cutoff_Hz/Fs)) */ |
| shift=celt_ilog2(Fs/(cutoff_Hz*4)); |
| for (c=0;c<channels;c++) |
| { |
| for (i=0;i<len;i++) |
| { |
| opus_val32 x, y; |
| x = SHL32(EXTEND32(in[channels*i+c]), 14); |
| y = x-hp_mem[2*c]; |
| hp_mem[2*c] = hp_mem[2*c] + PSHR32(x - hp_mem[2*c], shift); |
| out[channels*i+c] = EXTRACT16(SATURATE(PSHR32(y, 14), 32767)); |
| } |
| } |
| } |
| |
| #else |
| static void dc_reject(const opus_val16 *in, opus_int32 cutoff_Hz, opus_val16 *out, opus_val32 *hp_mem, int len, int channels, opus_int32 Fs) |
| { |
| int i; |
| float coef, coef2; |
| coef = 6.3f*cutoff_Hz/Fs; |
| coef2 = 1-coef; |
| if (channels==2) |
| { |
| float m0, m2; |
| m0 = hp_mem[0]; |
| m2 = hp_mem[2]; |
| for (i=0;i<len;i++) |
| { |
| opus_val32 x0, x1, out0, out1; |
| x0 = in[2*i+0]; |
| x1 = in[2*i+1]; |
| out0 = x0-m0; |
| out1 = x1-m2; |
| m0 = coef*x0 + VERY_SMALL + coef2*m0; |
| m2 = coef*x1 + VERY_SMALL + coef2*m2; |
| out[2*i+0] = out0; |
| out[2*i+1] = out1; |
| } |
| hp_mem[0] = m0; |
| hp_mem[2] = m2; |
| } else { |
| float m0; |
| m0 = hp_mem[0]; |
| for (i=0;i<len;i++) |
| { |
| opus_val32 x, y; |
| x = in[i]; |
| y = x-m0; |
| m0 = coef*x + VERY_SMALL + coef2*m0; |
| out[i] = y; |
| } |
| hp_mem[0] = m0; |
| } |
| } |
| #endif |
| |
| static void stereo_fade(const opus_val16 *in, opus_val16 *out, opus_val16 g1, opus_val16 g2, |
| int overlap48, int frame_size, int channels, const opus_val16 *window, opus_int32 Fs) |
| { |
| int i; |
| int overlap; |
| int inc; |
| inc = 48000/Fs; |
| overlap=overlap48/inc; |
| g1 = Q15ONE-g1; |
| g2 = Q15ONE-g2; |
| for (i=0;i<overlap;i++) |
| { |
| opus_val32 diff; |
| opus_val16 g, w; |
| w = MULT16_16_Q15(window[i*inc], window[i*inc]); |
| g = SHR32(MAC16_16(MULT16_16(w,g2), |
| Q15ONE-w, g1), 15); |
| diff = EXTRACT16(HALF32((opus_val32)in[i*channels] - (opus_val32)in[i*channels+1])); |
| diff = MULT16_16_Q15(g, diff); |
| out[i*channels] = out[i*channels] - diff; |
| out[i*channels+1] = out[i*channels+1] + diff; |
| } |
| for (;i<frame_size;i++) |
| { |
| opus_val32 diff; |
| diff = EXTRACT16(HALF32((opus_val32)in[i*channels] - (opus_val32)in[i*channels+1])); |
| diff = MULT16_16_Q15(g2, diff); |
| out[i*channels] = out[i*channels] - diff; |
| out[i*channels+1] = out[i*channels+1] + diff; |
| } |
| } |
| |
| static void gain_fade(const opus_val16 *in, opus_val16 *out, opus_val16 g1, opus_val16 g2, |
| int overlap48, int frame_size, int channels, const opus_val16 *window, opus_int32 Fs) |
| { |
| int i; |
| int inc; |
| int overlap; |
| int c; |
| inc = 48000/Fs; |
| overlap=overlap48/inc; |
| if (channels==1) |
| { |
| for (i=0;i<overlap;i++) |
| { |
| opus_val16 g, w; |
| w = MULT16_16_Q15(window[i*inc], window[i*inc]); |
| g = SHR32(MAC16_16(MULT16_16(w,g2), |
| Q15ONE-w, g1), 15); |
| out[i] = MULT16_16_Q15(g, in[i]); |
| } |
| } else { |
| for (i=0;i<overlap;i++) |
| { |
| opus_val16 g, w; |
| w = MULT16_16_Q15(window[i*inc], window[i*inc]); |
| g = SHR32(MAC16_16(MULT16_16(w,g2), |
| Q15ONE-w, g1), 15); |
| out[i*2] = MULT16_16_Q15(g, in[i*2]); |
| out[i*2+1] = MULT16_16_Q15(g, in[i*2+1]); |
| } |
| } |
| c=0;do { |
| for (i=overlap;i<frame_size;i++) |
| { |
| out[i*channels+c] = MULT16_16_Q15(g2, in[i*channels+c]); |
| } |
| } |
| while (++c<channels); |
| } |
| |
| OpusEncoder *opus_encoder_create(opus_int32 Fs, int channels, int application, int *error) |
| { |
| int ret; |
| OpusEncoder *st; |
| if((Fs!=48000&&Fs!=24000&&Fs!=16000&&Fs!=12000&&Fs!=8000)||(channels!=1&&channels!=2)|| |
| (application != OPUS_APPLICATION_VOIP && application != OPUS_APPLICATION_AUDIO |
| && application != OPUS_APPLICATION_RESTRICTED_LOWDELAY)) |
| { |
| if (error) |
| *error = OPUS_BAD_ARG; |
| return NULL; |
| } |
| st = (OpusEncoder *)opus_alloc(opus_encoder_get_size(channels)); |
| if (st == NULL) |
| { |
| if (error) |
| *error = OPUS_ALLOC_FAIL; |
| return NULL; |
| } |
| ret = opus_encoder_init(st, Fs, channels, application); |
| if (error) |
| *error = ret; |
| if (ret != OPUS_OK) |
| { |
| opus_free(st); |
| st = NULL; |
| } |
| return st; |
| } |
| |
| static opus_int32 user_bitrate_to_bitrate(OpusEncoder *st, int frame_size, int max_data_bytes) |
| { |
| if(!frame_size)frame_size=st->Fs/400; |
| if (st->user_bitrate_bps==OPUS_AUTO) |
| return 60*st->Fs/frame_size + st->Fs*st->channels; |
| else if (st->user_bitrate_bps==OPUS_BITRATE_MAX) |
| return max_data_bytes*8*st->Fs/frame_size; |
| else |
| return st->user_bitrate_bps; |
| } |
| |
| #ifndef DISABLE_FLOAT_API |
| #ifdef FIXED_POINT |
| #define PCM2VAL(x) FLOAT2INT16(x) |
| #else |
| #define PCM2VAL(x) SCALEIN(x) |
| #endif |
| |
| void downmix_float(const void *_x, opus_val32 *y, int subframe, int offset, int c1, int c2, int C) |
| { |
| const float *x; |
| int j; |
| |
| x = (const float *)_x; |
| for (j=0;j<subframe;j++) |
| y[j] = PCM2VAL(x[(j+offset)*C+c1]); |
| if (c2>-1) |
| { |
| for (j=0;j<subframe;j++) |
| y[j] += PCM2VAL(x[(j+offset)*C+c2]); |
| } else if (c2==-2) |
| { |
| int c; |
| for (c=1;c<C;c++) |
| { |
| for (j=0;j<subframe;j++) |
| y[j] += PCM2VAL(x[(j+offset)*C+c]); |
| } |
| } |
| } |
| #endif |
| |
| void downmix_int(const void *_x, opus_val32 *y, int subframe, int offset, int c1, int c2, int C) |
| { |
| const opus_int16 *x; |
| int j; |
| |
| x = (const opus_int16 *)_x; |
| for (j=0;j<subframe;j++) |
| y[j] = x[(j+offset)*C+c1]; |
| if (c2>-1) |
| { |
| for (j=0;j<subframe;j++) |
| y[j] += x[(j+offset)*C+c2]; |
| } else if (c2==-2) |
| { |
| int c; |
| for (c=1;c<C;c++) |
| { |
| for (j=0;j<subframe;j++) |
| y[j] += x[(j+offset)*C+c]; |
| } |
| } |
| } |
| |
| opus_int32 frame_size_select(opus_int32 frame_size, int variable_duration, opus_int32 Fs) |
| { |
| int new_size; |
| if (frame_size<Fs/400) |
| return -1; |
| if (variable_duration == OPUS_FRAMESIZE_ARG) |
| new_size = frame_size; |
| else if (variable_duration >= OPUS_FRAMESIZE_2_5_MS && variable_duration <= OPUS_FRAMESIZE_120_MS) |
| { |
| if (variable_duration <= OPUS_FRAMESIZE_40_MS) |
| new_size = (Fs/400)<<(variable_duration-OPUS_FRAMESIZE_2_5_MS); |
| else |
| new_size = (variable_duration-OPUS_FRAMESIZE_2_5_MS-2)*Fs/50; |
| } |
| else |
| return -1; |
| if (new_size>frame_size) |
| return -1; |
| if (400*new_size!=Fs && 200*new_size!=Fs && 100*new_size!=Fs && |
| 50*new_size!=Fs && 25*new_size!=Fs && 50*new_size!=3*Fs && |
| 50*new_size!=4*Fs && 50*new_size!=5*Fs && 50*new_size!=6*Fs) |
| return -1; |
| return new_size; |
| } |
| |
| opus_val16 compute_stereo_width(const opus_val16 *pcm, int frame_size, opus_int32 Fs, StereoWidthState *mem) |
| { |
| opus_val32 xx, xy, yy; |
| opus_val16 sqrt_xx, sqrt_yy; |
| opus_val16 qrrt_xx, qrrt_yy; |
| int frame_rate; |
| int i; |
| opus_val16 short_alpha; |
| |
| frame_rate = Fs/frame_size; |
| short_alpha = Q15ONE - MULT16_16(25, Q15ONE)/IMAX(50,frame_rate); |
| xx=xy=yy=0; |
| /* Unroll by 4. The frame size is always a multiple of 4 *except* for |
| 2.5 ms frames at 12 kHz. Since this setting is very rare (and very |
| stupid), we just discard the last two samples. */ |
| for (i=0;i<frame_size-3;i+=4) |
| { |
| opus_val32 pxx=0; |
| opus_val32 pxy=0; |
| opus_val32 pyy=0; |
| opus_val16 x, y; |
| x = pcm[2*i]; |
| y = pcm[2*i+1]; |
| pxx = SHR32(MULT16_16(x,x),2); |
| pxy = SHR32(MULT16_16(x,y),2); |
| pyy = SHR32(MULT16_16(y,y),2); |
| x = pcm[2*i+2]; |
| y = pcm[2*i+3]; |
| pxx += SHR32(MULT16_16(x,x),2); |
| pxy += SHR32(MULT16_16(x,y),2); |
| pyy += SHR32(MULT16_16(y,y),2); |
| x = pcm[2*i+4]; |
| y = pcm[2*i+5]; |
| pxx += SHR32(MULT16_16(x,x),2); |
| pxy += SHR32(MULT16_16(x,y),2); |
| pyy += SHR32(MULT16_16(y,y),2); |
| x = pcm[2*i+6]; |
| y = pcm[2*i+7]; |
| pxx += SHR32(MULT16_16(x,x),2); |
| pxy += SHR32(MULT16_16(x,y),2); |
| pyy += SHR32(MULT16_16(y,y),2); |
| |
| xx += SHR32(pxx, 10); |
| xy += SHR32(pxy, 10); |
| yy += SHR32(pyy, 10); |
| } |
| #ifndef FIXED_POINT |
| if (!(xx < 1e9f) || celt_isnan(xx) || !(yy < 1e9f) || celt_isnan(yy)) |
| { |
| xy = xx = yy = 0; |
| } |
| #endif |
| mem->XX += MULT16_32_Q15(short_alpha, xx-mem->XX); |
| mem->XY += MULT16_32_Q15(short_alpha, xy-mem->XY); |
| mem->YY += MULT16_32_Q15(short_alpha, yy-mem->YY); |
| mem->XX = MAX32(0, mem->XX); |
| mem->XY = MAX32(0, mem->XY); |
| mem->YY = MAX32(0, mem->YY); |
| if (MAX32(mem->XX, mem->YY)>QCONST16(8e-4f, 18)) |
| { |
| opus_val16 corr; |
| opus_val16 ldiff; |
| opus_val16 width; |
| sqrt_xx = celt_sqrt(mem->XX); |
| sqrt_yy = celt_sqrt(mem->YY); |
| qrrt_xx = celt_sqrt(sqrt_xx); |
| qrrt_yy = celt_sqrt(sqrt_yy); |
| /* Inter-channel correlation */ |
| mem->XY = MIN32(mem->XY, sqrt_xx*sqrt_yy); |
| corr = SHR32(frac_div32(mem->XY,EPSILON+MULT16_16(sqrt_xx,sqrt_yy)),16); |
| /* Approximate loudness difference */ |
| ldiff = MULT16_16(Q15ONE, ABS16(qrrt_xx-qrrt_yy))/(EPSILON+qrrt_xx+qrrt_yy); |
| width = MULT16_16_Q15(celt_sqrt(QCONST32(1.f,30)-MULT16_16(corr,corr)), ldiff); |
| /* Smoothing over one second */ |
| mem->smoothed_width += (width-mem->smoothed_width)/frame_rate; |
| /* Peak follower */ |
| mem->max_follower = MAX16(mem->max_follower-QCONST16(.02f,15)/frame_rate, mem->smoothed_width); |
| } |
| /*printf("%f %f %f %f %f ", corr/(float)Q15ONE, ldiff/(float)Q15ONE, width/(float)Q15ONE, mem->smoothed_width/(float)Q15ONE, mem->max_follower/(float)Q15ONE);*/ |
| return EXTRACT16(MIN32(Q15ONE, MULT16_16(20, mem->max_follower))); |
| } |
| |
| static int decide_fec(int useInBandFEC, int PacketLoss_perc, int last_fec, int mode, int *bandwidth, opus_int32 rate) |
| { |
| int orig_bandwidth; |
| if (!useInBandFEC || PacketLoss_perc == 0 || mode == MODE_CELT_ONLY) |
| return 0; |
| orig_bandwidth = *bandwidth; |
| for (;;) |
| { |
| opus_int32 hysteresis; |
| opus_int32 LBRR_rate_thres_bps; |
| /* Compute threshold for using FEC at the current bandwidth setting */ |
| LBRR_rate_thres_bps = fec_thresholds[2*(*bandwidth - OPUS_BANDWIDTH_NARROWBAND)]; |
| hysteresis = fec_thresholds[2*(*bandwidth - OPUS_BANDWIDTH_NARROWBAND) + 1]; |
| if (last_fec == 1) LBRR_rate_thres_bps -= hysteresis; |
| if (last_fec == 0) LBRR_rate_thres_bps += hysteresis; |
| LBRR_rate_thres_bps = silk_SMULWB( silk_MUL( LBRR_rate_thres_bps, |
| 125 - silk_min( PacketLoss_perc, 25 ) ), SILK_FIX_CONST( 0.01, 16 ) ); |
| /* If loss <= 5%, we look at whether we have enough rate to enable FEC. |
| If loss > 5%, we decrease the bandwidth until we can enable FEC. */ |
| if (rate > LBRR_rate_thres_bps) |
| return 1; |
| else if (PacketLoss_perc <= 5) |
| return 0; |
| else if (*bandwidth > OPUS_BANDWIDTH_NARROWBAND) |
| (*bandwidth)--; |
| else |
| break; |
| } |
| /* Couldn't find any bandwidth to enable FEC, keep original bandwidth. */ |
| *bandwidth = orig_bandwidth; |
| return 0; |
| } |
| |
| static int compute_silk_rate_for_hybrid(int rate, int bandwidth, int frame20ms, int vbr, int fec, int channels) { |
| int entry; |
| int i; |
| int N; |
| int silk_rate; |
| static int rate_table[][5] = { |
| /* |total| |-------- SILK------------| |
| |-- No FEC -| |--- FEC ---| |
| 10ms 20ms 10ms 20ms */ |
| { 0, 0, 0, 0, 0}, |
| {12000, 10000, 10000, 11000, 11000}, |
| {16000, 13500, 13500, 15000, 15000}, |
| {20000, 16000, 16000, 18000, 18000}, |
| {24000, 18000, 18000, 21000, 21000}, |
| {32000, 22000, 22000, 28000, 28000}, |
| {64000, 38000, 38000, 50000, 50000} |
| }; |
| /* Do the allocation per-channel. */ |
| rate /= channels; |
| entry = 1 + frame20ms + 2*fec; |
| N = sizeof(rate_table)/sizeof(rate_table[0]); |
| for (i=1;i<N;i++) |
| { |
| if (rate_table[i][0] > rate) break; |
| } |
| if (i == N) |
| { |
| silk_rate = rate_table[i-1][entry]; |
| /* For now, just give 50% of the extra bits to SILK. */ |
| silk_rate += (rate-rate_table[i-1][0])/2; |
| } else { |
| opus_int32 lo, hi, x0, x1; |
| lo = rate_table[i-1][entry]; |
| hi = rate_table[i][entry]; |
| x0 = rate_table[i-1][0]; |
| x1 = rate_table[i][0]; |
| silk_rate = (lo*(x1-rate) + hi*(rate-x0))/(x1-x0); |
| } |
| if (!vbr) |
| { |
| /* Tiny boost to SILK for CBR. We should probably tune this better. */ |
| silk_rate += 100; |
| } |
| if (bandwidth==OPUS_BANDWIDTH_SUPERWIDEBAND) |
| silk_rate += 300; |
| silk_rate *= channels; |
| /* Small adjustment for stereo (calibrated for 32 kb/s, haven't tried other bitrates). */ |
| if (channels == 2 && rate >= 12000) |
| silk_rate -= 1000; |
| return silk_rate; |
| } |
| |
| /* Returns the equivalent bitrate corresponding to 20 ms frames, |
| complexity 10 VBR operation. */ |
| static opus_int32 compute_equiv_rate(opus_int32 bitrate, int channels, |
| int frame_rate, int vbr, int mode, int complexity, int loss) |
| { |
| opus_int32 equiv; |
| equiv = bitrate; |
| /* Take into account overhead from smaller frames. */ |
| if (frame_rate > 50) |
| equiv -= (40*channels+20)*(frame_rate - 50); |
| /* CBR is about a 8% penalty for both SILK and CELT. */ |
| if (!vbr) |
| equiv -= equiv/12; |
| /* Complexity makes about 10% difference (from 0 to 10) in general. */ |
| equiv = equiv * (90+complexity)/100; |
| if (mode == MODE_SILK_ONLY || mode == MODE_HYBRID) |
| { |
| /* SILK complexity 0-1 uses the non-delayed-decision NSQ, which |
| costs about 20%. */ |
| if (complexity<2) |
| equiv = equiv*4/5; |
| equiv -= equiv*loss/(6*loss + 10); |
| } else if (mode == MODE_CELT_ONLY) { |
| /* CELT complexity 0-4 doesn't have the pitch filter, which costs |
| about 10%. */ |
| if (complexity<5) |
| equiv = equiv*9/10; |
| } else { |
| /* Mode not known yet */ |
| /* Half the SILK loss*/ |
| equiv -= equiv*loss/(12*loss + 20); |
| } |
| return equiv; |
| } |
| |
| #ifndef DISABLE_FLOAT_API |
| |
| static int is_digital_silence(const opus_val16* pcm, int frame_size, int channels, int lsb_depth) |
| { |
| int silence = 0; |
| opus_val32 sample_max = 0; |
| #ifdef MLP_TRAINING |
| return 0; |
| #endif |
| sample_max = celt_maxabs16(pcm, frame_size*channels); |
| |
| #ifdef FIXED_POINT |
| silence = (sample_max == 0); |
| (void)lsb_depth; |
| #else |
| silence = (sample_max <= (opus_val16) 1 / (1 << lsb_depth)); |
| #endif |
| |
| return silence; |
| } |
| |
| #ifdef FIXED_POINT |
| static opus_val32 compute_frame_energy(const opus_val16 *pcm, int frame_size, int channels, int arch) |
| { |
| int i; |
| opus_val32 sample_max; |
| int max_shift; |
| int shift; |
| opus_val32 energy = 0; |
| int len = frame_size*channels; |
| (void)arch; |
| /* Max amplitude in the signal */ |
| sample_max = celt_maxabs16(pcm, len); |
| |
| /* Compute the right shift required in the MAC to avoid an overflow */ |
| max_shift = celt_ilog2(len); |
| shift = IMAX(0, (celt_ilog2(sample_max) << 1) + max_shift - 28); |
| |
| /* Compute the energy */ |
| for (i=0; i<len; i++) |
| energy += SHR32(MULT16_16(pcm[i], pcm[i]), shift); |
| |
| /* Normalize energy by the frame size and left-shift back to the original position */ |
| energy /= len; |
| energy = SHL32(energy, shift); |
| |
| return energy; |
| } |
| #else |
| static opus_val32 compute_frame_energy(const opus_val16 *pcm, int frame_size, int channels, int arch) |
| { |
| int len = frame_size*channels; |
| return celt_inner_prod(pcm, pcm, len, arch)/len; |
| } |
| #endif |
| |
| /* Decides if DTX should be turned on (=1) or off (=0) */ |
| static int decide_dtx_mode(float activity_probability, /* probability that current frame contains speech/music */ |
| int *nb_no_activity_frames, /* number of consecutive frames with no activity */ |
| opus_val32 peak_signal_energy, /* peak energy of desired signal detected so far */ |
| const opus_val16 *pcm, /* input pcm signal */ |
| int frame_size, /* frame size */ |
| int channels, |
| int is_silence, /* only digital silence detected in this frame */ |
| int arch |
| ) |
| { |
| opus_val32 noise_energy; |
| |
| if (!is_silence) |
| { |
| if (activity_probability < DTX_ACTIVITY_THRESHOLD) /* is noise */ |
| { |
| noise_energy = compute_frame_energy(pcm, frame_size, channels, arch); |
| |
| /* but is sufficiently quiet */ |
| is_silence = peak_signal_energy >= (PSEUDO_SNR_THRESHOLD * noise_energy); |
| } |
| } |
| |
| if (is_silence) |
| { |
| /* The number of consecutive DTX frames should be within the allowed bounds */ |
| (*nb_no_activity_frames)++; |
| |
| if (*nb_no_activity_frames > NB_SPEECH_FRAMES_BEFORE_DTX) |
| { |
| if (*nb_no_activity_frames <= (NB_SPEECH_FRAMES_BEFORE_DTX + MAX_CONSECUTIVE_DTX)) |
| /* Valid frame for DTX! */ |
| return 1; |
| else |
| (*nb_no_activity_frames) = NB_SPEECH_FRAMES_BEFORE_DTX; |
| } |
| } else |
| (*nb_no_activity_frames) = 0; |
| |
| return 0; |
| } |
| |
| #endif |
| |
| static opus_int32 encode_multiframe_packet(OpusEncoder *st, |
| const opus_val16 *pcm, |
| int nb_frames, |
| int frame_size, |
| unsigned char *data, |
| opus_int32 out_data_bytes, |
| int to_celt, |
| int lsb_depth, |
| int float_api) |
| { |
| int i; |
| int ret = 0; |
| VARDECL(unsigned char, tmp_data); |
| int bak_mode, bak_bandwidth, bak_channels, bak_to_mono; |
| VARDECL(OpusRepacketizer, rp); |
| int max_header_bytes; |
| opus_int32 bytes_per_frame; |
| opus_int32 cbr_bytes; |
| opus_int32 repacketize_len; |
| int tmp_len; |
| ALLOC_STACK; |
| |
| /* Worst cases: |
| * 2 frames: Code 2 with different compressed sizes |
| * >2 frames: Code 3 VBR */ |
| max_header_bytes = nb_frames == 2 ? 3 : (2+(nb_frames-1)*2); |
| |
| if (st->use_vbr || st->user_bitrate_bps==OPUS_BITRATE_MAX) |
| repacketize_len = out_data_bytes; |
| else { |
| cbr_bytes = 3*st->bitrate_bps/(3*8*st->Fs/(frame_size*nb_frames)); |
| repacketize_len = IMIN(cbr_bytes, out_data_bytes); |
| } |
| bytes_per_frame = IMIN(1276, 1+(repacketize_len-max_header_bytes)/nb_frames); |
| |
| ALLOC(tmp_data, nb_frames*bytes_per_frame, unsigned char); |
| ALLOC(rp, 1, OpusRepacketizer); |
| opus_repacketizer_init(rp); |
| |
| bak_mode = st->user_forced_mode; |
| bak_bandwidth = st->user_bandwidth; |
| bak_channels = st->force_channels; |
| |
| st->user_forced_mode = st->mode; |
| st->user_bandwidth = st->bandwidth; |
| st->force_channels = st->stream_channels; |
| |
| bak_to_mono = st->silk_mode.toMono; |
| if (bak_to_mono) |
| st->force_channels = 1; |
| else |
| st->prev_channels = st->stream_channels; |
| |
| for (i=0;i<nb_frames;i++) |
| { |
| st->silk_mode.toMono = 0; |
| st->nonfinal_frame = i<(nb_frames-1); |
| |
| /* When switching from SILK/Hybrid to CELT, only ask for a switch at the last frame */ |
| if (to_celt && i==nb_frames-1) |
| st->user_forced_mode = MODE_CELT_ONLY; |
| |
| tmp_len = opus_encode_native(st, pcm+i*(st->channels*frame_size), frame_size, |
| tmp_data+i*bytes_per_frame, bytes_per_frame, lsb_depth, NULL, 0, 0, 0, 0, |
| NULL, float_api); |
| |
| if (tmp_len<0) |
| { |
| RESTORE_STACK; |
| return OPUS_INTERNAL_ERROR; |
| } |
| |
| ret = opus_repacketizer_cat(rp, tmp_data+i*bytes_per_frame, tmp_len); |
| |
| if (ret<0) |
| { |
| RESTORE_STACK; |
| return OPUS_INTERNAL_ERROR; |
| } |
| } |
| |
| ret = opus_repacketizer_out_range_impl(rp, 0, nb_frames, data, repacketize_len, 0, !st->use_vbr); |
| |
| if (ret<0) |
| { |
| RESTORE_STACK; |
| return OPUS_INTERNAL_ERROR; |
| } |
| |
| /* Discard configs that were forced locally for the purpose of repacketization */ |
| st->user_forced_mode = bak_mode; |
| st->user_bandwidth = bak_bandwidth; |
| st->force_channels = bak_channels; |
| st->silk_mode.toMono = bak_to_mono; |
| |
| RESTORE_STACK; |
| return ret; |
| } |
| |
| static int compute_redundancy_bytes(opus_int32 max_data_bytes, opus_int32 bitrate_bps, int frame_rate, int channels) |
| { |
| int redundancy_bytes_cap; |
| int redundancy_bytes; |
| opus_int32 redundancy_rate; |
| int base_bits; |
| opus_int32 available_bits; |
| base_bits = (40*channels+20); |
| |
| /* Equivalent rate for 5 ms frames. */ |
| redundancy_rate = bitrate_bps + base_bits*(200 - frame_rate); |
| /* For VBR, further increase the bitrate if we can afford it. It's pretty short |
| and we'll avoid artefacts. */ |
| redundancy_rate = 3*redundancy_rate/2; |
| redundancy_bytes = redundancy_rate/1600; |
| |
| /* Compute the max rate we can use given CBR or VBR with cap. */ |
| available_bits = max_data_bytes*8 - 2*base_bits; |
| redundancy_bytes_cap = (available_bits*240/(240+48000/frame_rate) + base_bits)/8; |
| redundancy_bytes = IMIN(redundancy_bytes, redundancy_bytes_cap); |
| /* It we can't get enough bits for redundancy to be worth it, rely on the decoder PLC. */ |
| if (redundancy_bytes > 4 + 8*channels) |
| redundancy_bytes = IMIN(257, redundancy_bytes); |
| else |
| redundancy_bytes = 0; |
| return redundancy_bytes; |
| } |
| |
| opus_int32 opus_encode_native(OpusEncoder *st, const opus_val16 *pcm, int frame_size, |
| unsigned char *data, opus_int32 out_data_bytes, int lsb_depth, |
| const void *analysis_pcm, opus_int32 analysis_size, int c1, int c2, |
| int analysis_channels, downmix_func downmix, int float_api) |
| { |
| void *silk_enc; |
| CELTEncoder *celt_enc; |
| int i; |
| int ret=0; |
| opus_int32 nBytes; |
| ec_enc enc; |
| int bytes_target; |
| int prefill=0; |
| int start_band = 0; |
| int redundancy = 0; |
| int redundancy_bytes = 0; /* Number of bytes to use for redundancy frame */ |
| int celt_to_silk = 0; |
| VARDECL(opus_val16, pcm_buf); |
| int nb_compr_bytes; |
| int to_celt = 0; |
| opus_uint32 redundant_rng = 0; |
| int cutoff_Hz, hp_freq_smth1; |
| int voice_est; /* Probability of voice in Q7 */ |
| opus_int32 equiv_rate; |
| int delay_compensation; |
| int frame_rate; |
| opus_int32 max_rate; /* Max bitrate we're allowed to use */ |
| int curr_bandwidth; |
| opus_val16 HB_gain; |
| opus_int32 max_data_bytes; /* Max number of bytes we're allowed to use */ |
| int total_buffer; |
| opus_val16 stereo_width; |
| const CELTMode *celt_mode; |
| #ifndef DISABLE_FLOAT_API |
| AnalysisInfo analysis_info; |
| int analysis_read_pos_bak=-1; |
| int analysis_read_subframe_bak=-1; |
| int is_silence = 0; |
| #endif |
| VARDECL(opus_val16, tmp_prefill); |
| |
| ALLOC_STACK; |
| |
| max_data_bytes = IMIN(1276, out_data_bytes); |
| |
| st->rangeFinal = 0; |
| if (frame_size <= 0 || max_data_bytes <= 0) |
| { |
| RESTORE_STACK; |
| return OPUS_BAD_ARG; |
| } |
| |
| /* Cannot encode 100 ms in 1 byte */ |
| if (max_data_bytes==1 && st->Fs==(frame_size*10)) |
| { |
| RESTORE_STACK; |
| return OPUS_BUFFER_TOO_SMALL; |
| } |
| |
| silk_enc = (char*)st+st->silk_enc_offset; |
| celt_enc = (CELTEncoder*)((char*)st+st->celt_enc_offset); |
| if (st->application == OPUS_APPLICATION_RESTRICTED_LOWDELAY) |
| delay_compensation = 0; |
| else |
| delay_compensation = st->delay_compensation; |
| |
| lsb_depth = IMIN(lsb_depth, st->lsb_depth); |
| |
| celt_encoder_ctl(celt_enc, CELT_GET_MODE(&celt_mode)); |
| #ifndef DISABLE_FLOAT_API |
| analysis_info.valid = 0; |
| #ifdef FIXED_POINT |
| if (st->silk_mode.complexity >= 10 && st->Fs>=16000) |
| #else |
| if (st->silk_mode.complexity >= 7 && st->Fs>=16000) |
| #endif |
| { |
| if (is_digital_silence(pcm, frame_size, st->channels, lsb_depth)) |
| { |
| is_silence = 1; |
| } else { |
| analysis_read_pos_bak = st->analysis.read_pos; |
| analysis_read_subframe_bak = st->analysis.read_subframe; |
| run_analysis(&st->analysis, celt_mode, analysis_pcm, analysis_size, frame_size, |
| c1, c2, analysis_channels, st->Fs, |
| lsb_depth, downmix, &analysis_info); |
| } |
| |
| /* Track the peak signal energy */ |
| if (!is_silence && analysis_info.activity_probability > DTX_ACTIVITY_THRESHOLD) |
| st->peak_signal_energy = MAX32(MULT16_32_Q15(QCONST16(0.999f, 15), st->peak_signal_energy), |
| compute_frame_energy(pcm, frame_size, st->channels, st->arch)); |
| } |
| #else |
| (void)analysis_pcm; |
| (void)analysis_size; |
| (void)c1; |
| (void)c2; |
| (void)analysis_channels; |
| (void)downmix; |
| #endif |
| |
| #ifndef DISABLE_FLOAT_API |
| /* Reset voice_ratio if this frame is not silent or if analysis is disabled. |
| * Otherwise, preserve voice_ratio from the last non-silent frame */ |
| if (!is_silence) |
| st->voice_ratio = -1; |
| |
| st->detected_bandwidth = 0; |
| if (analysis_info.valid) |
| { |
| int analysis_bandwidth; |
| if (st->signal_type == OPUS_AUTO) |
| { |
| float prob; |
| if (st->prev_mode == 0) |
| prob = analysis_info.music_prob; |
| else if (st->prev_mode == MODE_CELT_ONLY) |
| prob = analysis_info.music_prob_max; |
| else |
| prob = analysis_info.music_prob_min; |
| st->voice_ratio = (int)floor(.5+100*(1-prob)); |
| } |
| |
| analysis_bandwidth = analysis_info.bandwidth; |
| if (analysis_bandwidth<=12) |
| st->detected_bandwidth = OPUS_BANDWIDTH_NARROWBAND; |
| else if (analysis_bandwidth<=14) |
| st->detected_bandwidth = OPUS_BANDWIDTH_MEDIUMBAND; |
| else if (analysis_bandwidth<=16) |
| st->detected_bandwidth = OPUS_BANDWIDTH_WIDEBAND; |
| else if (analysis_bandwidth<=18) |
| st->detected_bandwidth = OPUS_BANDWIDTH_SUPERWIDEBAND; |
| else |
| st->detected_bandwidth = OPUS_BANDWIDTH_FULLBAND; |
| } |
| #else |
| st->voice_ratio = -1; |
| #endif |
| |
| if (st->channels==2 && st->force_channels!=1) |
| stereo_width = compute_stereo_width(pcm, frame_size, st->Fs, &st->width_mem); |
| else |
| stereo_width = 0; |
| total_buffer = delay_compensation; |
| st->bitrate_bps = user_bitrate_to_bitrate(st, frame_size, max_data_bytes); |
| |
| frame_rate = st->Fs/frame_size; |
| if (!st->use_vbr) |
| { |
| int cbrBytes; |
| /* Multiply by 12 to make sure the division is exact. */ |
| int frame_rate12 = 12*st->Fs/frame_size; |
| /* We need to make sure that "int" values always fit in 16 bits. */ |
| cbrBytes = IMIN( (12*st->bitrate_bps/8 + frame_rate12/2)/frame_rate12, max_data_bytes); |
| st->bitrate_bps = cbrBytes*(opus_int32)frame_rate12*8/12; |
| /* Make sure we provide at least one byte to avoid failing. */ |
| max_data_bytes = IMAX(1, cbrBytes); |
| } |
| if (max_data_bytes<3 || st->bitrate_bps < 3*frame_rate*8 |
| || (frame_rate<50 && (max_data_bytes*frame_rate<300 || st->bitrate_bps < 2400))) |
| { |
| /*If the space is too low to do something useful, emit 'PLC' frames.*/ |
| int tocmode = st->mode; |
| int bw = st->bandwidth == 0 ? OPUS_BANDWIDTH_NARROWBAND : st->bandwidth; |
| int packet_code = 0; |
| int num_multiframes = 0; |
| |
| if (tocmode==0) |
| tocmode = MODE_SILK_ONLY; |
| if (frame_rate>100) |
| tocmode = MODE_CELT_ONLY; |
| /* 40 ms -> 2 x 20 ms if in CELT_ONLY or HYBRID mode */ |
| if (frame_rate==25 && tocmode!=MODE_SILK_ONLY) |
| { |
| frame_rate = 50; |
| packet_code = 1; |
| } |
| |
| /* >= 60 ms frames */ |
| if (frame_rate<=16) |
| { |
| /* 1 x 60 ms, 2 x 40 ms, 2 x 60 ms */ |
| if (out_data_bytes==1 || (tocmode==MODE_SILK_ONLY && frame_rate!=10)) |
| { |
| tocmode = MODE_SILK_ONLY; |
| |
| packet_code = frame_rate <= 12; |
| frame_rate = frame_rate == 12 ? 25 : 16; |
| } |
| else |
| { |
| num_multiframes = 50/frame_rate; |
| frame_rate = 50; |
| packet_code = 3; |
| } |
| } |
| |
| if(tocmode==MODE_SILK_ONLY&&bw>OPUS_BANDWIDTH_WIDEBAND) |
| bw=OPUS_BANDWIDTH_WIDEBAND; |
| else if (tocmode==MODE_CELT_ONLY&&bw==OPUS_BANDWIDTH_MEDIUMBAND) |
| bw=OPUS_BANDWIDTH_NARROWBAND; |
| else if (tocmode==MODE_HYBRID&&bw<=OPUS_BANDWIDTH_SUPERWIDEBAND) |
| bw=OPUS_BANDWIDTH_SUPERWIDEBAND; |
| |
| data[0] = gen_toc(tocmode, frame_rate, bw, st->stream_channels); |
| data[0] |= packet_code; |
| |
| ret = packet_code <= 1 ? 1 : 2; |
| |
| max_data_bytes = IMAX(max_data_bytes, ret); |
| |
| if (packet_code==3) |
| data[1] = num_multiframes; |
| |
| if (!st->use_vbr) |
| { |
| ret = opus_packet_pad(data, ret, max_data_bytes); |
| if (ret == OPUS_OK) |
| ret = max_data_bytes; |
| else |
| ret = OPUS_INTERNAL_ERROR; |
| } |
| RESTORE_STACK; |
| return ret; |
| } |
| max_rate = frame_rate*max_data_bytes*8; |
| |
| /* Equivalent 20-ms rate for mode/channel/bandwidth decisions */ |
| equiv_rate = compute_equiv_rate(st->bitrate_bps, st->channels, st->Fs/frame_size, |
| st->use_vbr, 0, st->silk_mode.complexity, st->silk_mode.packetLossPercentage); |
| |
| if (st->signal_type == OPUS_SIGNAL_VOICE) |
| voice_est = 127; |
| else if (st->signal_type == OPUS_SIGNAL_MUSIC) |
| voice_est = 0; |
| else if (st->voice_ratio >= 0) |
| { |
| voice_est = st->voice_ratio*327>>8; |
| /* For AUDIO, never be more than 90% confident of having speech */ |
| if (st->application == OPUS_APPLICATION_AUDIO) |
| voice_est = IMIN(voice_est, 115); |
| } else if (st->application == OPUS_APPLICATION_VOIP) |
| voice_est = 115; |
| else |
| voice_est = 48; |
| |
| if (st->force_channels!=OPUS_AUTO && st->channels == 2) |
| { |
| st->stream_channels = st->force_channels; |
| } else { |
| #ifdef FUZZING |
| /* Random mono/stereo decision */ |
| if (st->channels == 2 && (rand()&0x1F)==0) |
| st->stream_channels = 3-st->stream_channels; |
| #else |
| /* Rate-dependent mono-stereo decision */ |
| if (st->channels == 2) |
| { |
| opus_int32 stereo_threshold; |
| stereo_threshold = stereo_music_threshold + ((voice_est*voice_est*(stereo_voice_threshold-stereo_music_threshold))>>14); |
| if (st->stream_channels == 2) |
| stereo_threshold -= 1000; |
| else |
| stereo_threshold += 1000; |
| st->stream_channels = (equiv_rate > stereo_threshold) ? 2 : 1; |
| } else { |
| st->stream_channels = st->channels; |
| } |
| #endif |
| } |
| /* Update equivalent rate for channels decision. */ |
| equiv_rate = compute_equiv_rate(st->bitrate_bps, st->stream_channels, st->Fs/frame_size, |
| st->use_vbr, 0, st->silk_mode.complexity, st->silk_mode.packetLossPercentage); |
| |
| /* Mode selection depending on application and signal type */ |
| if (st->application == OPUS_APPLICATION_RESTRICTED_LOWDELAY) |
| { |
| st->mode = MODE_CELT_ONLY; |
| } else if (st->user_forced_mode == OPUS_AUTO) |
| { |
| #ifdef FUZZING |
| /* Random mode switching */ |
| if ((rand()&0xF)==0) |
| { |
| if ((rand()&0x1)==0) |
| st->mode = MODE_CELT_ONLY; |
| else |
| st->mode = MODE_SILK_ONLY; |
| } else { |
| if (st->prev_mode==MODE_CELT_ONLY) |
| st->mode = MODE_CELT_ONLY; |
| else |
| st->mode = MODE_SILK_ONLY; |
| } |
| #else |
| opus_int32 mode_voice, mode_music; |
| opus_int32 threshold; |
| |
| /* Interpolate based on stereo width */ |
| mode_voice = (opus_int32)(MULT16_32_Q15(Q15ONE-stereo_width,mode_thresholds[0][0]) |
| + MULT16_32_Q15(stereo_width,mode_thresholds[1][0])); |
| mode_music = (opus_int32)(MULT16_32_Q15(Q15ONE-stereo_width,mode_thresholds[1][1]) |
| + MULT16_32_Q15(stereo_width,mode_thresholds[1][1])); |
| /* Interpolate based on speech/music probability */ |
| threshold = mode_music + ((voice_est*voice_est*(mode_voice-mode_music))>>14); |
| /* Bias towards SILK for VoIP because of some useful features */ |
| if (st->application == OPUS_APPLICATION_VOIP) |
| threshold += 8000; |
| |
| /*printf("%f %d\n", stereo_width/(float)Q15ONE, threshold);*/ |
| /* Hysteresis */ |
| if (st->prev_mode == MODE_CELT_ONLY) |
| threshold -= 4000; |
| else if (st->prev_mode>0) |
| threshold += 4000; |
| |
| st->mode = (equiv_rate >= threshold) ? MODE_CELT_ONLY: MODE_SILK_ONLY; |
| |
| /* When FEC is enabled and there's enough packet loss, use SILK */ |
| if (st->silk_mode.useInBandFEC && st->silk_mode.packetLossPercentage > (128-voice_est)>>4) |
| st->mode = MODE_SILK_ONLY; |
| /* When encoding voice and DTX is enabled but the generalized DTX cannot be used, |
| because of complexity and sampling frequency settings, switch to SILK DTX and |
| set the encoder to SILK mode */ |
| #ifndef DISABLE_FLOAT_API |
| st->silk_mode.useDTX = st->use_dtx && !(analysis_info.valid || is_silence); |
| #else |
| st->silk_mode.useDTX = st->use_dtx; |
| #endif |
| if (st->silk_mode.useDTX && voice_est > 100) |
| st->mode = MODE_SILK_ONLY; |
| #endif |
| |
| /* If max_data_bytes represents less than 6 kb/s, switch to CELT-only mode */ |
| if (max_data_bytes < (frame_rate > 50 ? 9000 : 6000)*frame_size / (st->Fs * 8)) |
| st->mode = MODE_CELT_ONLY; |
| } else { |
| st->mode = st->user_forced_mode; |
| } |
| |
| /* Override the chosen mode to make sure we meet the requested frame size */ |
| if (st->mode != MODE_CELT_ONLY && frame_size < st->Fs/100) |
| st->mode = MODE_CELT_ONLY; |
| if (st->lfe) |
| st->mode = MODE_CELT_ONLY; |
| |
| if (st->prev_mode > 0 && |
| ((st->mode != MODE_CELT_ONLY && st->prev_mode == MODE_CELT_ONLY) || |
| (st->mode == MODE_CELT_ONLY && st->prev_mode != MODE_CELT_ONLY))) |
| { |
| redundancy = 1; |
| celt_to_silk = (st->mode != MODE_CELT_ONLY); |
| if (!celt_to_silk) |
| { |
| /* Switch to SILK/hybrid if frame size is 10 ms or more*/ |
| if (frame_size >= st->Fs/100) |
| { |
| st->mode = st->prev_mode; |
| to_celt = 1; |
| } else { |
| redundancy=0; |
| } |
| } |
| } |
| |
| /* When encoding multiframes, we can ask for a switch to CELT only in the last frame. This switch |
| * is processed above as the requested mode shouldn't interrupt stereo->mono transition. */ |
| if (st->stream_channels == 1 && st->prev_channels ==2 && st->silk_mode.toMono==0 |
| && st->mode != MODE_CELT_ONLY && st->prev_mode != MODE_CELT_ONLY) |
| { |
| /* Delay stereo->mono transition by two frames so that SILK can do a smooth downmix */ |
| st->silk_mode.toMono = 1; |
| st->stream_channels = 2; |
| } else { |
| st->silk_mode.toMono = 0; |
| } |
| |
| /* Update equivalent rate with mode decision. */ |
| equiv_rate = compute_equiv_rate(st->bitrate_bps, st->stream_channels, st->Fs/frame_size, |
| st->use_vbr, st->mode, st->silk_mode.complexity, st->silk_mode.packetLossPercentage); |
| |
| if (st->mode != MODE_CELT_ONLY && st->prev_mode == MODE_CELT_ONLY) |
| { |
| silk_EncControlStruct dummy; |
| silk_InitEncoder( silk_enc, st->arch, &dummy); |
| prefill=1; |
| } |
| |
| /* Automatic (rate-dependent) bandwidth selection */ |
| if (st->mode == MODE_CELT_ONLY || st->first || st->silk_mode.allowBandwidthSwitch) |
| { |
| const opus_int32 *voice_bandwidth_thresholds, *music_bandwidth_thresholds; |
| opus_int32 bandwidth_thresholds[8]; |
| int bandwidth = OPUS_BANDWIDTH_FULLBAND; |
| |
| if (st->channels==2 && st->force_channels!=1) |
| { |
| voice_bandwidth_thresholds = stereo_voice_bandwidth_thresholds; |
| music_bandwidth_thresholds = stereo_music_bandwidth_thresholds; |
| } else { |
| voice_bandwidth_thresholds = mono_voice_bandwidth_thresholds; |
| music_bandwidth_thresholds = mono_music_bandwidth_thresholds; |
| } |
| /* Interpolate bandwidth thresholds depending on voice estimation */ |
| for (i=0;i<8;i++) |
| { |
| bandwidth_thresholds[i] = music_bandwidth_thresholds[i] |
| + ((voice_est*voice_est*(voice_bandwidth_thresholds[i]-music_bandwidth_thresholds[i]))>>14); |
| } |
| do { |
| int threshold, hysteresis; |
| threshold = bandwidth_thresholds[2*(bandwidth-OPUS_BANDWIDTH_MEDIUMBAND)]; |
| hysteresis = bandwidth_thresholds[2*(bandwidth-OPUS_BANDWIDTH_MEDIUMBAND)+1]; |
| if (!st->first) |
| { |
| if (st->auto_bandwidth >= bandwidth) |
| threshold -= hysteresis; |
| else |
| threshold += hysteresis; |
| } |
| if (equiv_rate >= threshold) |
| break; |
| } while (--bandwidth>OPUS_BANDWIDTH_NARROWBAND); |
| /* We don't use mediumband anymore, except when explicitly requested or during |
| mode transitions. */ |
| if (bandwidth == OPUS_BANDWIDTH_MEDIUMBAND) |
| bandwidth = OPUS_BANDWIDTH_WIDEBAND; |
| st->bandwidth = st->auto_bandwidth = bandwidth; |
| /* Prevents any transition to SWB/FB until the SILK layer has fully |
| switched to WB mode and turned the variable LP filter off */ |
| if (!st->first && st->mode != MODE_CELT_ONLY && !st->silk_mode.inWBmodeWithoutVariableLP && st->bandwidth > OPUS_BANDWIDTH_WIDEBAND) |
| st->bandwidth = OPUS_BANDWIDTH_WIDEBAND; |
| } |
| |
| if (st->bandwidth>st->max_bandwidth) |
| st->bandwidth = st->max_bandwidth; |
| |
| if (st->user_bandwidth != OPUS_AUTO) |
| st->bandwidth = st->user_bandwidth; |
| |
| /* This prevents us from using hybrid at unsafe CBR/max rates */ |
| if (st->mode != MODE_CELT_ONLY && max_rate < 15000) |
| { |
| st->bandwidth = IMIN(st->bandwidth, OPUS_BANDWIDTH_WIDEBAND); |
| } |
| |
| /* Prevents Opus from wasting bits on frequencies that are above |
| the Nyquist rate of the input signal */ |
| if (st->Fs <= 24000 && st->bandwidth > OPUS_BANDWIDTH_SUPERWIDEBAND) |
| st->bandwidth = OPUS_BANDWIDTH_SUPERWIDEBAND; |
| if (st->Fs <= 16000 && st->bandwidth > OPUS_BANDWIDTH_WIDEBAND) |
| st->bandwidth = OPUS_BANDWIDTH_WIDEBAND; |
| if (st->Fs <= 12000 && st->bandwidth > OPUS_BANDWIDTH_MEDIUMBAND) |
| st->bandwidth = OPUS_BANDWIDTH_MEDIUMBAND; |
| if (st->Fs <= 8000 && st->bandwidth > OPUS_BANDWIDTH_NARROWBAND) |
| st->bandwidth = OPUS_BANDWIDTH_NARROWBAND; |
| #ifndef DISABLE_FLOAT_API |
| /* Use detected bandwidth to reduce the encoded bandwidth. */ |
| if (st->detected_bandwidth && st->user_bandwidth == OPUS_AUTO) |
| { |
| int min_detected_bandwidth; |
| /* Makes bandwidth detection more conservative just in case the detector |
| gets it wrong when we could have coded a high bandwidth transparently. |
| When operating in SILK/hybrid mode, we don't go below wideband to avoid |
| more complicated switches that require redundancy. */ |
| if (equiv_rate <= 18000*st->stream_channels && st->mode == MODE_CELT_ONLY) |
| min_detected_bandwidth = OPUS_BANDWIDTH_NARROWBAND; |
| else if (equiv_rate <= 24000*st->stream_channels && st->mode == MODE_CELT_ONLY) |
| min_detected_bandwidth = OPUS_BANDWIDTH_MEDIUMBAND; |
| else if (equiv_rate <= 30000*st->stream_channels) |
| min_detected_bandwidth = OPUS_BANDWIDTH_WIDEBAND; |
| else if (equiv_rate <= 44000*st->stream_channels) |
| min_detected_bandwidth = OPUS_BANDWIDTH_SUPERWIDEBAND; |
| else |
| min_detected_bandwidth = OPUS_BANDWIDTH_FULLBAND; |
| |
| st->detected_bandwidth = IMAX(st->detected_bandwidth, min_detected_bandwidth); |
| st->bandwidth = IMIN(st->bandwidth, st->detected_bandwidth); |
| } |
| #endif |
| st->silk_mode.LBRR_coded = decide_fec(st->silk_mode.useInBandFEC, st->silk_mode.packetLossPercentage, |
| st->silk_mode.LBRR_coded, st->mode, &st->bandwidth, equiv_rate); |
| celt_encoder_ctl(celt_enc, OPUS_SET_LSB_DEPTH(lsb_depth)); |
| |
| /* CELT mode doesn't support mediumband, use wideband instead */ |
| if (st->mode == MODE_CELT_ONLY && st->bandwidth == OPUS_BANDWIDTH_MEDIUMBAND) |
| st->bandwidth = OPUS_BANDWIDTH_WIDEBAND; |
| if (st->lfe) |
| st->bandwidth = OPUS_BANDWIDTH_NARROWBAND; |
| |
| curr_bandwidth = st->bandwidth; |
| |
| /* Chooses the appropriate mode for speech |
| *NEVER* switch to/from CELT-only mode here as this will invalidate some assumptions */ |
| if (st->mode == MODE_SILK_ONLY && curr_bandwidth > OPUS_BANDWIDTH_WIDEBAND) |
| st->mode = MODE_HYBRID; |
| if (st->mode == MODE_HYBRID && curr_bandwidth <= OPUS_BANDWIDTH_WIDEBAND) |
| st->mode = MODE_SILK_ONLY; |
| |
| /* Can't support higher than >60 ms frames, and >20 ms when in Hybrid or CELT-only modes */ |
| if ((frame_size > st->Fs/50 && (st->mode != MODE_SILK_ONLY)) || frame_size > 3*st->Fs/50) |
| { |
| int enc_frame_size; |
| int nb_frames; |
| |
| if (st->mode == MODE_SILK_ONLY) |
| { |
| if (frame_size == 2*st->Fs/25) /* 80 ms -> 2x 40 ms */ |
| enc_frame_size = st->Fs/25; |
| else if (frame_size == 3*st->Fs/25) /* 120 ms -> 2x 60 ms */ |
| enc_frame_size = 3*st->Fs/50; |
| else /* 100 ms -> 5x 20 ms */ |
| enc_frame_size = st->Fs/50; |
| } |
| else |
| enc_frame_size = st->Fs/50; |
| |
| nb_frames = frame_size/enc_frame_size; |
| |
| #ifndef DISABLE_FLOAT_API |
| if (analysis_read_pos_bak!= -1) |
| { |
| st->analysis.read_pos = analysis_read_pos_bak; |
| st->analysis.read_subframe = analysis_read_subframe_bak; |
| } |
| #endif |
| |
| ret = encode_multiframe_packet(st, pcm, nb_frames, enc_frame_size, data, |
| out_data_bytes, to_celt, lsb_depth, float_api); |
| |
| RESTORE_STACK; |
| return ret; |
| } |
| |
| /* For the first frame at a new SILK bandwidth */ |
| if (st->silk_bw_switch) |
| { |
| redundancy = 1; |
| celt_to_silk = 1; |
| st->silk_bw_switch = 0; |
| /* Do a prefill without reseting the sampling rate control. */ |
| prefill=2; |
| } |
| |
| /* If we decided to go with CELT, make sure redundancy is off, no matter what |
| we decided earlier. */ |
| if (st->mode == MODE_CELT_ONLY) |
| redundancy = 0; |
| |
| if (redundancy) |
| { |
| redundancy_bytes = compute_redundancy_bytes(max_data_bytes, st->bitrate_bps, frame_rate, st->stream_channels); |
| if (redundancy_bytes == 0) |
| redundancy = 0; |
| } |
| |
| /* printf("%d %d %d %d\n", st->bitrate_bps, st->stream_channels, st->mode, curr_bandwidth); */ |
| bytes_target = IMIN(max_data_bytes-redundancy_bytes, st->bitrate_bps * frame_size / (st->Fs * 8)) - 1; |
| |
| data += 1; |
| |
| ec_enc_init(&enc, data, max_data_bytes-1); |
| |
| ALLOC(pcm_buf, (total_buffer+frame_size)*st->channels, opus_val16); |
| OPUS_COPY(pcm_buf, &st->delay_buffer[(st->encoder_buffer-total_buffer)*st->channels], total_buffer*st->channels); |
| |
| if (st->mode == MODE_CELT_ONLY) |
| hp_freq_smth1 = silk_LSHIFT( silk_lin2log( VARIABLE_HP_MIN_CUTOFF_HZ ), 8 ); |
| else |
| hp_freq_smth1 = ((silk_encoder*)silk_enc)->state_Fxx[0].sCmn.variable_HP_smth1_Q15; |
| |
| st->variable_HP_smth2_Q15 = silk_SMLAWB( st->variable_HP_smth2_Q15, |
| hp_freq_smth1 - st->variable_HP_smth2_Q15, SILK_FIX_CONST( VARIABLE_HP_SMTH_COEF2, 16 ) ); |
| |
| /* convert from log scale to Hertz */ |
| cutoff_Hz = silk_log2lin( silk_RSHIFT( st->variable_HP_smth2_Q15, 8 ) ); |
| |
| if (st->application == OPUS_APPLICATION_VOIP) |
| { |
| hp_cutoff(pcm, cutoff_Hz, &pcm_buf[total_buffer*st->channels], st->hp_mem, frame_size, st->channels, st->Fs, st->arch); |
| } else { |
| dc_reject(pcm, 3, &pcm_buf[total_buffer*st->channels], st->hp_mem, frame_size, st->channels, st->Fs); |
| } |
| #ifndef FIXED_POINT |
| if (float_api) |
| { |
| opus_val32 sum; |
| sum = celt_inner_prod(&pcm_buf[total_buffer*st->channels], &pcm_buf[total_buffer*st->channels], frame_size*st->channels, st->arch); |
| /* This should filter out both NaNs and ridiculous signals that could |
| cause NaNs further down. */ |
| if (!(sum < 1e9f) || celt_isnan(sum)) |
| { |
| OPUS_CLEAR(&pcm_buf[total_buffer*st->channels], frame_size*st->channels); |
| st->hp_mem[0] = st->hp_mem[1] = st->hp_mem[2] = st->hp_mem[3] = 0; |
| } |
| } |
| #endif |
| |
| |
| /* SILK processing */ |
| HB_gain = Q15ONE; |
| if (st->mode != MODE_CELT_ONLY) |
| { |
| opus_int32 total_bitRate, celt_rate; |
| opus_int activity; |
| #ifdef FIXED_POINT |
| const opus_int16 *pcm_silk; |
| #else |
| VARDECL(opus_int16, pcm_silk); |
| ALLOC(pcm_silk, st->channels*frame_size, opus_int16); |
| #endif |
| |
| activity = VAD_NO_DECISION; |
| #ifndef DISABLE_FLOAT_API |
| if( analysis_info.valid ) { |
| /* Inform SILK about the Opus VAD decision */ |
| activity = ( analysis_info.activity_probability >= DTX_ACTIVITY_THRESHOLD ); |
| } |
| #endif |
| |
| /* Distribute bits between SILK and CELT */ |
| total_bitRate = 8 * bytes_target * frame_rate; |
| if( st->mode == MODE_HYBRID ) { |
| /* Base rate for SILK */ |
| st->silk_mode.bitRate = compute_silk_rate_for_hybrid(total_bitRate, |
| curr_bandwidth, st->Fs == 50 * frame_size, st->use_vbr, st->silk_mode.LBRR_coded, |
| st->stream_channels); |
| if (!st->energy_masking) |
| { |
| /* Increasingly attenuate high band when it gets allocated fewer bits */ |
| celt_rate = total_bitRate - st->silk_mode.bitRate; |
| HB_gain = Q15ONE - SHR32(celt_exp2(-celt_rate * QCONST16(1.f/1024, 10)), 1); |
| } |
| } else { |
| /* SILK gets all bits */ |
| st->silk_mode.bitRate = total_bitRate; |
| } |
| |
| /* Surround masking for SILK */ |
| if (st->energy_masking && st->use_vbr && !st->lfe) |
| { |
| opus_val32 mask_sum=0; |
| opus_val16 masking_depth; |
| opus_int32 rate_offset; |
| int c; |
| int end = 17; |
| opus_int16 srate = 16000; |
| if (st->bandwidth == OPUS_BANDWIDTH_NARROWBAND) |
| { |
| end = 13; |
| srate = 8000; |
| } else if (st->bandwidth == OPUS_BANDWIDTH_MEDIUMBAND) |
| { |
| end = 15; |
| srate = 12000; |
| } |
| for (c=0;c<st->channels;c++) |
| { |
| for(i=0;i<end;i++) |
| { |
| opus_val16 mask; |
| mask = MAX16(MIN16(st->energy_masking[21*c+i], |
| QCONST16(.5f, DB_SHIFT)), -QCONST16(2.0f, DB_SHIFT)); |
| if (mask > 0) |
| mask = HALF16(mask); |
| mask_sum += mask; |
| } |
| } |
| /* Conservative rate reduction, we cut the masking in half */ |
| masking_depth = mask_sum / end*st->channels; |
| masking_depth += QCONST16(.2f, DB_SHIFT); |
| rate_offset = (opus_int32)PSHR32(MULT16_16(srate, masking_depth), DB_SHIFT); |
| rate_offset = MAX32(rate_offset, -2*st->silk_mode.bitRate/3); |
| /* Split the rate change between the SILK and CELT part for hybrid. */ |
| if (st->bandwidth==OPUS_BANDWIDTH_SUPERWIDEBAND || st->bandwidth==OPUS_BANDWIDTH_FULLBAND) |
| st->silk_mode.bitRate += 3*rate_offset/5; |
| else |
| st->silk_mode.bitRate += rate_offset; |
| } |
| |
| st->silk_mode.payloadSize_ms = 1000 * frame_size / st->Fs; |
| st->silk_mode.nChannelsAPI = st->channels; |
| st->silk_mode.nChannelsInternal = st->stream_channels; |
| if (curr_bandwidth == OPUS_BANDWIDTH_NARROWBAND) { |
| st->silk_mode.desiredInternalSampleRate = 8000; |
| } else if (curr_bandwidth == OPUS_BANDWIDTH_MEDIUMBAND) { |
| st->silk_mode.desiredInternalSampleRate = 12000; |
| } else { |
| celt_assert( st->mode == MODE_HYBRID || curr_bandwidth == OPUS_BANDWIDTH_WIDEBAND ); |
| st->silk_mode.desiredInternalSampleRate = 16000; |
| } |
| if( st->mode == MODE_HYBRID ) { |
| /* Don't allow bandwidth reduction at lowest bitrates in hybrid mode */ |
| st->silk_mode.minInternalSampleRate = 16000; |
| } else { |
| st->silk_mode.minInternalSampleRate = 8000; |
| } |
| |
| st->silk_mode.maxInternalSampleRate = 16000; |
| if (st->mode == MODE_SILK_ONLY) |
| { |
| opus_int32 effective_max_rate = max_rate; |
| if (frame_rate > 50) |
| effective_max_rate = effective_max_rate*2/3; |
| if (effective_max_rate < 8000) |
| { |
| st->silk_mode.maxInternalSampleRate = 12000; |
| st->silk_mode.desiredInternalSampleRate = IMIN(12000, st->silk_mode.desiredInternalSampleRate); |
| } |
| if (effective_max_rate < 7000) |
| { |
| st->silk_mode.maxInternalSampleRate = 8000; |
| st->silk_mode.desiredInternalSampleRate = IMIN(8000, st->silk_mode.desiredInternalSampleRate); |
| } |
| } |
| |
| st->silk_mode.useCBR = !st->use_vbr; |
| |
| /* Call SILK encoder for the low band */ |
| |
| /* Max bits for SILK, counting ToC, redundancy bytes, and optionally redundancy. */ |
| st->silk_mode.maxBits = (max_data_bytes-1)*8; |
| if (redundancy && redundancy_bytes >= 2) |
| { |
| /* Counting 1 bit for redundancy position and 20 bits for flag+size (only for hybrid). */ |
| st->silk_mode.maxBits -= redundancy_bytes*8 + 1; |
| if (st->mode == MODE_HYBRID) |
| st->silk_mode.maxBits -= 20; |
| } |
| if (st->silk_mode.useCBR) |
| { |
| if (st->mode == MODE_HYBRID) |
| { |
| st->silk_mode.maxBits = IMIN(st->silk_mode.maxBits, st->silk_mode.bitRate * frame_size / st->Fs); |
| } |
| } else { |
| /* Constrained VBR. */ |
| if (st->mode == MODE_HYBRID) |
| { |
| /* Compute SILK bitrate corresponding to the max total bits available */ |
| opus_int32 maxBitRate = compute_silk_rate_for_hybrid(st->silk_mode.maxBits*st->Fs / frame_size, |
| curr_bandwidth, st->Fs == 50 * frame_size, st->use_vbr, st->silk_mode.LBRR_coded, |
| st->stream_channels); |
| st->silk_mode.maxBits = maxBitRate * frame_size / st->Fs; |
| } |
| } |
| |
| if (prefill) |
| { |
| opus_int32 zero=0; |
| int prefill_offset; |
| /* Use a smooth onset for the SILK prefill to avoid the encoder trying to encode |
| a discontinuity. The exact location is what we need to avoid leaving any "gap" |
| in the audio when mixing with the redundant CELT frame. Here we can afford to |
| overwrite st->delay_buffer because the only thing that uses it before it gets |
| rewritten is tmp_prefill[] and even then only the part after the ramp really |
| gets used (rather than sent to the encoder and discarded) */ |
| prefill_offset = st->channels*(st->encoder_buffer-st->delay_compensation-st->Fs/400); |
| gain_fade(st->delay_buffer+prefill_offset, st->delay_buffer+prefill_offset, |
| 0, Q15ONE, celt_mode->overlap, st->Fs/400, st->channels, celt_mode->window, st->Fs); |
| OPUS_CLEAR(st->delay_buffer, prefill_offset); |
| #ifdef FIXED_POINT |
| pcm_silk = st->delay_buffer; |
| #else |
| for (i=0;i<st->encoder_buffer*st->channels;i++) |
| pcm_silk[i] = FLOAT2INT16(st->delay_buffer[i]); |
| #endif |
| silk_Encode( silk_enc, &st->silk_mode, pcm_silk, st->encoder_buffer, NULL, &zero, prefill, activity ); |
| /* Prevent a second switch in the real encode call. */ |
| st->silk_mode.opusCanSwitch = 0; |
| } |
| |
| #ifdef FIXED_POINT |
| pcm_silk = pcm_buf+total_buffer*st->channels; |
| #else |
| for (i=0;i<frame_size*st->channels;i++) |
| pcm_silk[i] = FLOAT2INT16(pcm_buf[total_buffer*st->channels + i]); |
| #endif |
| ret = silk_Encode( silk_enc, &st->silk_mode, pcm_silk, frame_size, &enc, &nBytes, 0, activity ); |
| if( ret ) { |
| /*fprintf (stderr, "SILK encode error: %d\n", ret);*/ |
| /* Handle error */ |
| RESTORE_STACK; |
| return OPUS_INTERNAL_ERROR; |
| } |
| |
| /* Extract SILK internal bandwidth for signaling in first byte */ |
| if( st->mode == MODE_SILK_ONLY ) { |
| if( st->silk_mode.internalSampleRate == 8000 ) { |
| curr_bandwidth = OPUS_BANDWIDTH_NARROWBAND; |
| } else if( st->silk_mode.internalSampleRate == 12000 ) { |
| curr_bandwidth = OPUS_BANDWIDTH_MEDIUMBAND; |
| } else if( st->silk_mode.internalSampleRate == 16000 ) { |
| curr_bandwidth = OPUS_BANDWIDTH_WIDEBAND; |
| } |
| } else { |
| celt_assert( st->silk_mode.internalSampleRate == 16000 ); |
| } |
| |
| st->silk_mode.opusCanSwitch = st->silk_mode.switchReady && !st->nonfinal_frame; |
| |
| if (nBytes==0) |
| { |
| st->rangeFinal = 0; |
| data[-1] = gen_toc(st->mode, st->Fs/frame_size, curr_bandwidth, st->stream_channels); |
| RESTORE_STACK; |
| return 1; |
| } |
| |
| /* FIXME: How do we allocate the redundancy for CBR? */ |
| if (st->silk_mode.opusCanSwitch) |
| { |
| redundancy_bytes = compute_redundancy_bytes(max_data_bytes, st->bitrate_bps, frame_rate, st->stream_channels); |
| redundancy = (redundancy_bytes != 0); |
| celt_to_silk = 0; |
| st->silk_bw_switch = 1; |
| } |
| } |
| |
| /* CELT processing */ |
| { |
| int endband=21; |
| |
| switch(curr_bandwidth) |
| { |
| case OPUS_BANDWIDTH_NARROWBAND: |
| endband = 13; |
| break; |
| case OPUS_BANDWIDTH_MEDIUMBAND: |
| case OPUS_BANDWIDTH_WIDEBAND: |
| endband = 17; |
| break; |
| case OPUS_BANDWIDTH_SUPERWIDEBAND: |
| endband = 19; |
| break; |
| case OPUS_BANDWIDTH_FULLBAND: |
| endband = 21; |
| break; |
| } |
| celt_encoder_ctl(celt_enc, CELT_SET_END_BAND(endband)); |
| celt_encoder_ctl(celt_enc, CELT_SET_CHANNELS(st->stream_channels)); |
| } |
| celt_encoder_ctl(celt_enc, OPUS_SET_BITRATE(OPUS_BITRATE_MAX)); |
| if (st->mode != MODE_SILK_ONLY) |
| { |
| opus_val32 celt_pred=2; |
| celt_encoder_ctl(celt_enc, OPUS_SET_VBR(0)); |
| /* We may still decide to disable prediction later */ |
| if (st->silk_mode.reducedDependency) |
| celt_pred = 0; |
| celt_encoder_ctl(celt_enc, CELT_SET_PREDICTION(celt_pred)); |
| |
| if (st->mode == MODE_HYBRID) |
| { |
| if( st->use_vbr ) { |
| celt_encoder_ctl(celt_enc, OPUS_SET_BITRATE(st->bitrate_bps-st->silk_mode.bitRate)); |
| celt_encoder_ctl(celt_enc, OPUS_SET_VBR_CONSTRAINT(0)); |
| } |
| } else { |
| if (st->use_vbr) |
| { |
| celt_encoder_ctl(celt_enc, OPUS_SET_VBR(1)); |
| celt_encoder_ctl(celt_enc, OPUS_SET_VBR_CONSTRAINT(st->vbr_constraint)); |
| celt_encoder_ctl(celt_enc, OPUS_SET_BITRATE(st->bitrate_bps)); |
| } |
| } |
| } |
| |
| ALLOC(tmp_prefill, st->channels*st->Fs/400, opus_val16); |
| if (st->mode != MODE_SILK_ONLY && st->mode != st->prev_mode && st->prev_mode > 0) |
| { |
| OPUS_COPY(tmp_prefill, &st->delay_buffer[(st->encoder_buffer-total_buffer-st->Fs/400)*st->channels], st->channels*st->Fs/400); |
| } |
| |
| if (st->channels*(st->encoder_buffer-(frame_size+total_buffer)) > 0) |
| { |
| OPUS_MOVE(st->delay_buffer, &st->delay_buffer[st->channels*frame_size], st->channels*(st->encoder_buffer-frame_size-total_buffer)); |
| OPUS_COPY(&st->delay_buffer[st->channels*(st->encoder_buffer-frame_size-total_buffer)], |
| &pcm_buf[0], |
| (frame_size+total_buffer)*st->channels); |
| } else { |
| OPUS_COPY(st->delay_buffer, &pcm_buf[(frame_size+total_buffer-st->encoder_buffer)*st->channels], st->encoder_buffer*st->channels); |
| } |
| /* gain_fade() and stereo_fade() need to be after the buffer copying |
| because we don't want any of this to affect the SILK part */ |
| if( st->prev_HB_gain < Q15ONE || HB_gain < Q15ONE ) { |
| gain_fade(pcm_buf, pcm_buf, |
| st->prev_HB_gain, HB_gain, celt_mode->overlap, frame_size, st->channels, celt_mode->window, st->Fs); |
| } |
| st->prev_HB_gain = HB_gain; |
| if (st->mode != MODE_HYBRID || st->stream_channels==1) |
| { |
| if (equiv_rate > 32000) |
| st->silk_mode.stereoWidth_Q14 = 16384; |
| else if (equiv_rate < 16000) |
| st->silk_mode.stereoWidth_Q14 = 0; |
| else |
| st->silk_mode.stereoWidth_Q14 = 16384 - 2048*(opus_int32)(32000-equiv_rate)/(equiv_rate-14000); |
| } |
| if( !st->energy_masking && st->channels == 2 ) { |
| /* Apply stereo width reduction (at low bitrates) */ |
| if( st->hybrid_stereo_width_Q14 < (1 << 14) || st->silk_mode.stereoWidth_Q14 < (1 << 14) ) { |
| opus_val16 g1, g2; |
| g1 = st->hybrid_stereo_width_Q14; |
| g2 = (opus_val16)(st->silk_mode.stereoWidth_Q14); |
| #ifdef FIXED_POINT |
| g1 = g1==16384 ? Q15ONE : SHL16(g1,1); |
| g2 = g2==16384 ? Q15ONE : SHL16(g2,1); |
| #else |
| g1 *= (1.f/16384); |
| g2 *= (1.f/16384); |
| #endif |
| stereo_fade(pcm_buf, pcm_buf, g1, g2, celt_mode->overlap, |
| frame_size, st->channels, celt_mode->window, st->Fs); |
| st->hybrid_stereo_width_Q14 = st->silk_mode.stereoWidth_Q14; |
| } |
| } |
| |
| if ( st->mode != MODE_CELT_ONLY && ec_tell(&enc)+17+20*(st->mode == MODE_HYBRID) <= 8*(max_data_bytes-1)) |
| { |
| /* For SILK mode, the redundancy is inferred from the length */ |
| if (st->mode == MODE_HYBRID) |
| ec_enc_bit_logp(&enc, redundancy, 12); |
| if (redundancy) |
| { |
| int max_redundancy; |
| ec_enc_bit_logp(&enc, celt_to_silk, 1); |
| if (st->mode == MODE_HYBRID) |
| { |
| /* Reserve the 8 bits needed for the redundancy length, |
| and at least a few bits for CELT if possible */ |
| max_redundancy = (max_data_bytes-1)-((ec_tell(&enc)+8+3+7)>>3); |
| } |
| else |
| max_redundancy = (max_data_bytes-1)-((ec_tell(&enc)+7)>>3); |
| /* Target the same bit-rate for redundancy as for the rest, |
| up to a max of 257 bytes */ |
| redundancy_bytes = IMIN(max_redundancy, redundancy_bytes); |
| redundancy_bytes = IMIN(257, IMAX(2, redundancy_bytes)); |
| if (st->mode == MODE_HYBRID) |
| ec_enc_uint(&enc, redundancy_bytes-2, 256); |
| } |
| } else { |
| redundancy = 0; |
| } |
| |
| if (!redundancy) |
| { |
| st->silk_bw_switch = 0; |
| redundancy_bytes = 0; |
| } |
| if (st->mode != MODE_CELT_ONLY)start_band=17; |
| |
| if (st->mode == MODE_SILK_ONLY) |
| { |
| ret = (ec_tell(&enc)+7)>>3; |
| ec_enc_done(&enc); |
| nb_compr_bytes = ret; |
| } else { |
| nb_compr_bytes = (max_data_bytes-1)-redundancy_bytes; |
| ec_enc_shrink(&enc, nb_compr_bytes); |
| } |
| |
| #ifndef DISABLE_FLOAT_API |
| if (redundancy || st->mode != MODE_SILK_ONLY) |
| celt_encoder_ctl(celt_enc, CELT_SET_ANALYSIS(&analysis_info)); |
| #endif |
| if (st->mode == MODE_HYBRID) { |
| SILKInfo info; |
| info.signalType = st->silk_mode.signalType; |
| info.offset = st->silk_mode.offset; |
| celt_encoder_ctl(celt_enc, CELT_SET_SILK_INFO(&info)); |
| } |
| |
| /* 5 ms redundant frame for CELT->SILK */ |
| if (redundancy && celt_to_silk) |
| { |
| int err; |
| celt_encoder_ctl(celt_enc, CELT_SET_START_BAND(0)); |
| celt_encoder_ctl(celt_enc, OPUS_SET_VBR(0)); |
| celt_encoder_ctl(celt_enc, OPUS_SET_BITRATE(OPUS_BITRATE_MAX)); |
| err = celt_encode_with_ec(celt_enc, pcm_buf, st->Fs/200, data+nb_compr_bytes, redundancy_bytes, NULL); |
| if (err < 0) |
| { |
| RESTORE_STACK; |
| return OPUS_INTERNAL_ERROR; |
| } |
| celt_encoder_ctl(celt_enc, OPUS_GET_FINAL_RANGE(&redundant_rng)); |
| celt_encoder_ctl(celt_enc, OPUS_RESET_STATE); |
| } |
| |
| celt_encoder_ctl(celt_enc, CELT_SET_START_BAND(start_band)); |
| |
| if (st->mode != MODE_SILK_ONLY) |
| { |
| if (st->mode != st->prev_mode && st->prev_mode > 0) |
| { |
| unsigned char dummy[2]; |
| celt_encoder_ctl(celt_enc, OPUS_RESET_STATE); |
| |
| /* Prefilling */ |
| celt_encode_with_ec(celt_enc, tmp_prefill, st->Fs/400, dummy, 2, NULL); |
| celt_encoder_ctl(celt_enc, CELT_SET_PREDICTION(0)); |
| } |
| /* If false, we already busted the budget and we'll end up with a "PLC frame" */ |
| if (ec_tell(&enc) <= 8*nb_compr_bytes) |
| { |
| /* Set the bitrate again if it was overridden in the redundancy code above*/ |
| if (redundancy && celt_to_silk && st->mode==MODE_HYBRID && st->use_vbr) |
| celt_encoder_ctl(celt_enc, OPUS_SET_BITRATE(st->bitrate_bps-st->silk_mode.bitRate)); |
| celt_encoder_ctl(celt_enc, OPUS_SET_VBR(st->use_vbr)); |
| ret = celt_encode_with_ec(celt_enc, pcm_buf, frame_size, NULL, nb_compr_bytes, &enc); |
| if (ret < 0) |
| { |
| RESTORE_STACK; |
| return OPUS_INTERNAL_ERROR; |
| } |
| /* Put CELT->SILK redundancy data in the right place. */ |
| if (redundancy && celt_to_silk && st->mode==MODE_HYBRID && st->use_vbr) |
| { |
| OPUS_MOVE(data+ret, data+nb_compr_bytes, redundancy_bytes); |
| nb_compr_bytes = nb_compr_bytes+redundancy_bytes; |
| } |
| } |
| } |
| |
| /* 5 ms redundant frame for SILK->CELT */ |
| if (redundancy && !celt_to_silk) |
| { |
| int err; |
| unsigned char dummy[2]; |
| int N2, N4; |
| N2 = st->Fs/200; |
| N4 = st->Fs/400; |
| |
| celt_encoder_ctl(celt_enc, OPUS_RESET_STATE); |
| celt_encoder_ctl(celt_enc, CELT_SET_START_BAND(0)); |
| celt_encoder_ctl(celt_enc, CELT_SET_PREDICTION(0)); |
| celt_encoder_ctl(celt_enc, OPUS_SET_VBR(0)); |
| celt_encoder_ctl(celt_enc, OPUS_SET_BITRATE(OPUS_BITRATE_MAX)); |
| |
| if (st->mode == MODE_HYBRID) |
| { |
| /* Shrink packet to what the encoder actually used. */ |
| nb_compr_bytes = ret; |
| ec_enc_shrink(&enc, nb_compr_bytes); |
| } |
| /* NOTE: We could speed this up slightly (at the expense of code size) by just adding a function that prefills the buffer */ |
| celt_encode_with_ec(celt_enc, pcm_buf+st->channels*(frame_size-N2-N4), N4, dummy, 2, NULL); |
| |
| err = celt_encode_with_ec(celt_enc, pcm_buf+st->channels*(frame_size-N2), N2, data+nb_compr_bytes, redundancy_bytes, NULL); |
| if (err < 0) |
| { |
| RESTORE_STACK; |
| return OPUS_INTERNAL_ERROR; |
| } |
| celt_encoder_ctl(celt_enc, OPUS_GET_FINAL_RANGE(&redundant_rng)); |
| } |
| |
| |
| |
| /* Signalling the mode in the first byte */ |
| data--; |
| data[0] = gen_toc(st->mode, st->Fs/frame_size, curr_bandwidth, st->stream_channels); |
| |
| st->rangeFinal = enc.rng ^ redundant_rng; |
| |
| if (to_celt) |
| st->prev_mode = MODE_CELT_ONLY; |
| else |
| st->prev_mode = st->mode; |
| st->prev_channels = st->stream_channels; |
| st->prev_framesize = frame_size; |
| |
| st->first = 0; |
| |
| /* DTX decision */ |
| #ifndef DISABLE_FLOAT_API |
| if (st->use_dtx && (analysis_info.valid || is_silence)) |
| { |
| if (decide_dtx_mode(analysis_info.activity_probability, &st->nb_no_activity_frames, |
| st->peak_signal_energy, pcm, frame_size, st->channels, is_silence, st->arch)) |
| { |
| st->rangeFinal = 0; |
| data[0] = gen_toc(st->mode, st->Fs/frame_size, curr_bandwidth, st->stream_channels); |
| RESTORE_STACK; |
| return 1; |
| } |
| } |
| #endif |
| |
| /* In the unlikely case that the SILK encoder busted its target, tell |
| the decoder to call the PLC */ |
| if (ec_tell(&enc) > (max_data_bytes-1)*8) |
| { |
| if (max_data_bytes < 2) |
| { |
| RESTORE_STACK; |
| return OPUS_BUFFER_TOO_SMALL; |
| } |
| data[1] = 0; |
| ret = 1; |
| st->rangeFinal = 0; |
| } else if (st->mode==MODE_SILK_ONLY&&!redundancy) |
| { |
| /*When in LPC only mode it's perfectly |
| reasonable to strip off trailing zero bytes as |
| the required range decoder behavior is to |
| fill these in. This can't be done when the MDCT |
| modes are used because the decoder needs to know |
| the actual length for allocation purposes.*/ |
| while(ret>2&&data[ret]==0)ret--; |
| } |
| /* Count ToC and redundancy */ |
| ret += 1+redundancy_bytes; |
| if (!st->use_vbr) |
| { |
| if (opus_packet_pad(data, ret, max_data_bytes) != OPUS_OK) |
| { |
| RESTORE_STACK; |
| return OPUS_INTERNAL_ERROR; |
| } |
| ret = max_data_bytes; |
| } |
| RESTORE_STACK; |
| return ret; |
| } |
| |
| #ifdef FIXED_POINT |
| |
| #ifndef DISABLE_FLOAT_API |
| opus_int32 opus_encode_float(OpusEncoder *st, const float *pcm, int analysis_frame_size, |
| unsigned char *data, opus_int32 max_data_bytes) |
| { |
| int i, ret; |
| int frame_size; |
| VARDECL(opus_int16, in); |
| ALLOC_STACK; |
| |
| frame_size = frame_size_select(analysis_frame_size, st->variable_duration, st->Fs); |
| if (frame_size <= 0) |
| { |
| RESTORE_STACK; |
| return OPUS_BAD_ARG; |
| } |
| ALLOC(in, frame_size*st->channels, opus_int16); |
| |
| for (i=0;i<frame_size*st->channels;i++) |
| in[i] = FLOAT2INT16(pcm[i]); |
| ret = opus_encode_native(st, in, frame_size, data, max_data_bytes, 16, |
| pcm, analysis_frame_size, 0, -2, st->channels, downmix_float, 1); |
| RESTORE_STACK; |
| return ret; |
| } |
| #endif |
| |
| opus_int32 opus_encode(OpusEncoder *st, const opus_int16 *pcm, int analysis_frame_size, |
| unsigned char *data, opus_int32 out_data_bytes) |
| { |
| int frame_size; |
| frame_size = frame_size_select(analysis_frame_size, st->variable_duration, st->Fs); |
| return opus_encode_native(st, pcm, frame_size, data, out_data_bytes, 16, |
| pcm, analysis_frame_size, 0, -2, st->channels, downmix_int, 0); |
| } |
| |
| #else |
| opus_int32 opus_encode(OpusEncoder *st, const opus_int16 *pcm, int analysis_frame_size, |
| unsigned char *data, opus_int32 max_data_bytes) |
| { |
| int i, ret; |
| int frame_size; |
| VARDECL(float, in); |
| ALLOC_STACK; |
| |
| frame_size = frame_size_select(analysis_frame_size, st->variable_duration, st->Fs); |
| if (frame_size <= 0) |
| { |
| RESTORE_STACK; |
| return OPUS_BAD_ARG; |
| } |
| ALLOC(in, frame_size*st->channels, float); |
| |
| for (i=0;i<frame_size*st->channels;i++) |
| in[i] = (1.0f/32768)*pcm[i]; |
| ret = opus_encode_native(st, in, frame_size, data, max_data_bytes, 16, |
| pcm, analysis_frame_size, 0, -2, st->channels, downmix_int, 0); |
| RESTORE_STACK; |
| return ret; |
| } |
| opus_int32 opus_encode_float(OpusEncoder *st, const float *pcm, int analysis_frame_size, |
| unsigned char *data, opus_int32 out_data_bytes) |
| { |
| int frame_size; |
| frame_size = frame_size_select(analysis_frame_size, st->variable_duration, st->Fs); |
| return opus_encode_native(st, pcm, frame_size, data, out_data_bytes, 24, |
| pcm, analysis_frame_size, 0, -2, st->channels, downmix_float, 1); |
| } |
| #endif |
| |
| |
| int opus_encoder_ctl(OpusEncoder *st, int request, ...) |
| { |
| int ret; |
| CELTEncoder *celt_enc; |
| va_list ap; |
| |
| ret = OPUS_OK; |
| va_start(ap, request); |
| |
| celt_enc = (CELTEncoder*)((char*)st+st->celt_enc_offset); |
| |
| switch (request) |
| { |
| case OPUS_SET_APPLICATION_REQUEST: |
| { |
| opus_int32 value = va_arg(ap, opus_int32); |
| if ( (value != OPUS_APPLICATION_VOIP && value != OPUS_APPLICATION_AUDIO |
| && value != OPUS_APPLICATION_RESTRICTED_LOWDELAY) |
| || (!st->first && st->application != value)) |
| { |
| ret = OPUS_BAD_ARG; |
| break; |
| } |
| st->application = value; |
| #ifndef DISABLE_FLOAT_API |
| st->analysis.application = value; |
| #endif |
| } |
| break; |
| case OPUS_GET_APPLICATION_REQUEST: |
| { |
| opus_int32 *value = va_arg(ap, opus_int32*); |
| if (!value) |
| { |
| goto bad_arg; |
| } |
| *value = st->application; |
| } |
| break; |
| case OPUS_SET_BITRATE_REQUEST: |
| { |
| opus_int32 value = va_arg(ap, opus_int32); |
| if (value != OPUS_AUTO && value != OPUS_BITRATE_MAX) |
| { |
| if (value <= 0) |
| goto bad_arg; |
| else if (value <= 500) |
| value = 500; |
| else if (value > (opus_int32)300000*st->channels) |
| value = (opus_int32)300000*st->channels; |
| } |
| st->user_bitrate_bps = value; |
| } |
| break; |
| case OPUS_GET_BITRATE_REQUEST: |
| { |
| opus_int32 *value = va_arg(ap, opus_int32*); |
| if (!value) |
| { |
| goto bad_arg; |
| } |
| *value = user_bitrate_to_bitrate(st, st->prev_framesize, 1276); |
| } |
| break; |
| case OPUS_SET_FORCE_CHANNELS_REQUEST: |
| { |
| opus_int32 value = va_arg(ap, opus_int32); |
| if((value<1 || value>st->channels) && value != OPUS_AUTO) |
| { |
| goto bad_arg; |
| } |
| st->force_channels = value; |
| } |
| break; |
| case OPUS_GET_FORCE_CHANNELS_REQUEST: |
| { |
| opus_int32 *value = va_arg(ap, opus_int32*); |
| if (!value) |
| { |
| goto bad_arg; |
| } |
| *value = st->force_channels; |
| } |
| break; |
| case OPUS_SET_MAX_BANDWIDTH_REQUEST: |
| { |
| opus_int32 value = va_arg(ap, opus_int32); |
| if (value < OPUS_BANDWIDTH_NARROWBAND || value > OPUS_BANDWIDTH_FULLBAND) |
| { |
| goto bad_arg; |
| } |
| st->max_bandwidth = value; |
| if (st->max_bandwidth == OPUS_BANDWIDTH_NARROWBAND) { |
| st->silk_mode.maxInternalSampleRate = 8000; |
| } else if (st->max_bandwidth == OPUS_BANDWIDTH_MEDIUMBAND) { |
| st->silk_mode.maxInternalSampleRate = 12000; |
| } else { |
| st->silk_mode.maxInternalSampleRate = 16000; |
| } |
| } |
| break; |
| case OPUS_GET_MAX_BANDWIDTH_REQUEST: |
| { |
| opus_int32 *value = va_arg(ap, opus_int32*); |
| if (!value) |
| { |
| goto bad_arg; |
| } |
| *value = st->max_bandwidth; |
| } |
| break; |
| case OPUS_SET_BANDWIDTH_REQUEST: |
| { |
| opus_int32 value = va_arg(ap, opus_int32); |
| if ((value < OPUS_BANDWIDTH_NARROWBAND || value > OPUS_BANDWIDTH_FULLBAND) && value != OPUS_AUTO) |
| { |
| goto bad_arg; |
| } |
| st->user_bandwidth = value; |
| if (st->user_bandwidth == OPUS_BANDWIDTH_NARROWBAND) { |
| st->silk_mode.maxInternalSampleRate = 8000; |
| } else if (st->user_bandwidth == OPUS_BANDWIDTH_MEDIUMBAND) { |
| st->silk_mode.maxInternalSampleRate = 12000; |
| } else { |
| st->silk_mode.maxInternalSampleRate = 16000; |
| } |
| } |
| break; |
| case OPUS_GET_BANDWIDTH_REQUEST: |
| { |
| opus_int32 *value = va_arg(ap, opus_int32*); |
| if (!value) |
| { |
| goto bad_arg; |
| } |
| *value = st->bandwidth; |
| } |
| break; |
| case OPUS_SET_DTX_REQUEST: |
| { |
| opus_int32 value = va_arg(ap, opus_int32); |
| if(value<0 || value>1) |
| { |
| goto bad_arg; |
| } |
| st->use_dtx = value; |
| } |
| break; |
| case OPUS_GET_DTX_REQUEST: |
| { |
| opus_int32 *value = va_arg(ap, opus_int32*); |
| if (!value) |
| { |
| goto bad_arg; |
| } |
| *value = st->use_dtx; |
| } |
| break; |
| case OPUS_SET_COMPLEXITY_REQUEST: |
| { |
| opus_int32 value = va_arg(ap, opus_int32); |
| if(value<0 || value>10) |
| { |
| goto bad_arg; |
| } |
| st->silk_mode.complexity = value; |
| celt_encoder_ctl(celt_enc, OPUS_SET_COMPLEXITY(value)); |
| } |
| break; |
| case OPUS_GET_COMPLEXITY_REQUEST: |
| { |
| opus_int32 *value = va_arg(ap, opus_int32*); |
| if (!value) |
| { |
| goto bad_arg; |
| } |
| *value = st->silk_mode.complexity; |
| } |
| break; |
| case OPUS_SET_INBAND_FEC_REQUEST: |
| { |
| opus_int32 value = va_arg(ap, opus_int32); |
| if(value<0 || value>1) |
| { |
| goto bad_arg; |
| } |
| st->silk_mode.useInBandFEC = value; |
| } |
| break; |
| case OPUS_GET_INBAND_FEC_REQUEST: |
| { |
| opus_int32 *value = va_arg(ap, opus_int32*); |
| if (!value) |
| { |
| goto bad_arg; |
| } |
| *value = st->silk_mode.useInBandFEC; |
| } |
| break; |
| case OPUS_SET_PACKET_LOSS_PERC_REQUEST: |
| { |
| opus_int32 value = va_arg(ap, opus_int32); |
| if (value < 0 || value > 100) |
| { |
| goto bad_arg; |
| } |
| st->silk_mode.packetLossPercentage = value; |
| celt_encoder_ctl(celt_enc, OPUS_SET_PACKET_LOSS_PERC(value)); |
| } |
| break; |
| case OPUS_GET_PACKET_LOSS_PERC_REQUEST: |
| { |
| opus_int32 *value = va_arg(ap, opus_int32*); |
| if (!value) |
| { |
| goto bad_arg; |
| } |
| *value = st->silk_mode.packetLossPercentage; |
| } |
| break; |
| case OPUS_SET_VBR_REQUEST: |
| { |
| opus_int32 value = va_arg(ap, opus_int32); |
| if(value<0 || value>1) |
| { |
| goto bad_arg; |
| } |
| st->use_vbr = value; |
| st->silk_mode.useCBR = 1-value; |
| } |
| break; |
| case OPUS_GET_VBR_REQUEST: |
| { |
| opus_int32 *value = va_arg(ap, opus_int32*); |
| if (!value) |
| { |
| goto bad_arg; |
| } |
| *value = st->use_vbr; |
| } |
| break; |
| case OPUS_SET_VOICE_RATIO_REQUEST: |
| { |
| opus_int32 value = va_arg(ap, opus_int32); |
| if (value<-1 || value>100) |
| { |
| goto bad_arg; |
| } |
| st->voice_ratio = value; |
| } |
| break; |
| case OPUS_GET_VOICE_RATIO_REQUEST: |
| { |
| opus_int32 *value = va_arg(ap, opus_int32*); |
| if (!value) |
| { |
| goto bad_arg; |
| } |
| *value = st->voice_ratio; |
| } |
| break; |
| case OPUS_SET_VBR_CONSTRAINT_REQUEST: |
| { |
| opus_int32 value = va_arg(ap, opus_int32); |
| if(value<0 || value>1) |
| { |
| goto bad_arg; |
| } |
| st->vbr_constraint = value; |
| } |
| break; |
| case OPUS_GET_VBR_CONSTRAINT_REQUEST: |
| { |
| opus_int32 *value = va_arg(ap, opus_int32*); |
| if (!value) |
| { |
| goto bad_arg; |
| } |
| *value = st->vbr_constraint; |
| } |
| break; |
| case OPUS_SET_SIGNAL_REQUEST: |
| { |
| opus_int32 value = va_arg(ap, opus_int32); |
| if(value!=OPUS_AUTO && value!=OPUS_SIGNAL_VOICE && value!=OPUS_SIGNAL_MUSIC) |
| { |
| goto bad_arg; |
| } |
| st->signal_type = value; |
| } |
| break; |
| case OPUS_GET_SIGNAL_REQUEST: |
| { |
| opus_int32 *value = va_arg(ap, opus_int32*); |
| if (!value) |
| { |
| goto bad_arg; |
| } |
| *value = st->signal_type; |
| } |
| break; |
| case OPUS_GET_LOOKAHEAD_REQUEST: |
| { |
| opus_int32 *value = va_arg(ap, opus_int32*); |
| if (!value) |
| { |
| goto bad_arg; |
| } |
| *value = st->Fs/400; |
| if (st->application != OPUS_APPLICATION_RESTRICTED_LOWDELAY) |
| *value += st->delay_compensation; |
| } |
| break; |
| case OPUS_GET_SAMPLE_RATE_REQUEST: |
| { |
| opus_int32 *value = va_arg(ap, opus_int32*); |
| if (!value) |
| { |
| goto bad_arg; |
| } |
| *value = st->Fs; |
| } |
| break; |
| case OPUS_GET_FINAL_RANGE_REQUEST: |
| { |
| opus_uint32 *value = va_arg(ap, opus_uint32*); |
| if (!value) |
| { |
| goto bad_arg; |
| } |
| *value = st->rangeFinal; |
| } |
| break; |
| case OPUS_SET_LSB_DEPTH_REQUEST: |
| { |
| opus_int32 value = va_arg(ap, opus_int32); |
| if (value<8 || value>24) |
| { |
| goto bad_arg; |
| } |
| st->lsb_depth=value; |
| } |
| break; |
| case OPUS_GET_LSB_DEPTH_REQUEST: |
| { |
| opus_int32 *value = va_arg(ap, opus_int32*); |
| if (!value) |
| { |
| goto bad_arg; |
| } |
| *value = st->lsb_depth; |
| } |
| break; |
| case OPUS_SET_EXPERT_FRAME_DURATION_REQUEST: |
| { |
| opus_int32 value = va_arg(ap, opus_int32); |
| if (value != OPUS_FRAMESIZE_ARG && value != OPUS_FRAMESIZE_2_5_MS && |
| value != OPUS_FRAMESIZE_5_MS && value != OPUS_FRAMESIZE_10_MS && |
| value != OPUS_FRAMESIZE_20_MS && value != OPUS_FRAMESIZE_40_MS && |
| value != OPUS_FRAMESIZE_60_MS && value != OPUS_FRAMESIZE_80_MS && |
| value != OPUS_FRAMESIZE_100_MS && value != OPUS_FRAMESIZE_120_MS) |
| { |
| goto bad_arg; |
| } |
| st->variable_duration = value; |
| celt_encoder_ctl(celt_enc, OPUS_SET_EXPERT_FRAME_DURATION(value)); |
| } |
| break; |
| case OPUS_GET_EXPERT_FRAME_DURATION_REQUEST: |
| { |
| opus_int32 *value = va_arg(ap, opus_int32*); |
| if (!value) |
| { |
| goto bad_arg; |
| } |
| *value = st->variable_duration; |
| } |
| break; |
| case OPUS_SET_PREDICTION_DISABLED_REQUEST: |
| { |
| opus_int32 value = va_arg(ap, opus_int32); |
| if (value > 1 || value < 0) |
| goto bad_arg; |
| st->silk_mode.reducedDependency = value; |
| } |
| break; |
| case OPUS_GET_PREDICTION_DISABLED_REQUEST: |
| { |
| opus_int32 *value = va_arg(ap, opus_int32*); |
| if (!value) |
| goto bad_arg; |
| *value = st->silk_mode.reducedDependency; |
| } |
| break; |
| case OPUS_SET_PHASE_INVERSION_DISABLED_REQUEST: |
| { |
| opus_int32 value = va_arg(ap, opus_int32); |
| if(value<0 || value>1) |
| { |
| goto bad_arg; |
| } |
| celt_encoder_ctl(celt_enc, OPUS_SET_PHASE_INVERSION_DISABLED(value)); |
| } |
| break; |
| case OPUS_GET_PHASE_INVERSION_DISABLED_REQUEST: |
| { |
| opus_int32 *value = va_arg(ap, opus_int32*); |
| if (!value) |
| { |
| goto bad_arg; |
| } |
| celt_encoder_ctl(celt_enc, OPUS_GET_PHASE_INVERSION_DISABLED(value)); |
| } |
| break; |
| case OPUS_RESET_STATE: |
| { |
| void *silk_enc; |
| silk_EncControlStruct dummy; |
| char *start; |
| silk_enc = (char*)st+st->silk_enc_offset; |
| #ifndef DISABLE_FLOAT_API |
| tonality_analysis_reset(&st->analysis); |
| #endif |
| |
| start = (char*)&st->OPUS_ENCODER_RESET_START; |
| OPUS_CLEAR(start, sizeof(OpusEncoder) - (start - (char*)st)); |
| |
| celt_encoder_ctl(celt_enc, OPUS_RESET_STATE); |
| silk_InitEncoder( silk_enc, st->arch, &dummy ); |
| st->stream_channels = st->channels; |
| st->hybrid_stereo_width_Q14 = 1 << 14; |
| st->prev_HB_gain = Q15ONE; |
| st->first = 1; |
| st->mode = MODE_HYBRID; |
| st->bandwidth = OPUS_BANDWIDTH_FULLBAND; |
| st->variable_HP_smth2_Q15 = silk_LSHIFT( silk_lin2log( VARIABLE_HP_MIN_CUTOFF_HZ ), 8 ); |
| } |
| break; |
| case OPUS_SET_FORCE_MODE_REQUEST: |
| { |
| opus_int32 value = va_arg(ap, opus_int32); |
| if ((value < MODE_SILK_ONLY || value > MODE_CELT_ONLY) && value != OPUS_AUTO) |
| { |
| goto bad_arg; |
| } |
| st->user_forced_mode = value; |
| } |
| break; |
| case OPUS_SET_LFE_REQUEST: |
| { |
| opus_int32 value = va_arg(ap, opus_int32); |
| st->lfe = value; |
| ret = celt_encoder_ctl(celt_enc, OPUS_SET_LFE(value)); |
| } |
| break; |
| case OPUS_SET_ENERGY_MASK_REQUEST: |
| { |
| opus_val16 *value = va_arg(ap, opus_val16*); |
| st->energy_masking = value; |
| ret = celt_encoder_ctl(celt_enc, OPUS_SET_ENERGY_MASK(value)); |
| } |
| break; |
| |
| case CELT_GET_MODE_REQUEST: |
| { |
| const CELTMode ** value = va_arg(ap, const CELTMode**); |
| if (!value) |
| { |
| goto bad_arg; |
| } |
| ret = celt_encoder_ctl(celt_enc, CELT_GET_MODE(value)); |
| } |
| break; |
| default: |
| /* fprintf(stderr, "unknown opus_encoder_ctl() request: %d", request);*/ |
| ret = OPUS_UNIMPLEMENTED; |
| break; |
| } |
| va_end(ap); |
| return ret; |
| bad_arg: |
| va_end(ap); |
| return OPUS_BAD_ARG; |
| } |
| |
| void opus_encoder_destroy(OpusEncoder *st) |
| { |
| opus_free(st); |
| } |