third_party/pulseaudio_includes/pulseaudio.12.2/pulse/thread-mainloop.h - cobalt - Git at Google

 #ifndef foothreadmainloophfoo
 #define foothreadmainloophfoo

 /***
   This file is part of PulseAudio.

   Copyright 2006 Lennart Poettering
   Copyright 2006 Pierre Ossman <ossman@cendio.se> for Cendio AB

   PulseAudio is free software; you can redistribute it and/or modify
   it under the terms of the GNU Lesser General Public License as published
   by the Free Software Foundation; either version 2.1 of the License,
   or (at your option) any later version.

   PulseAudio is distributed in the hope that it will be useful, but
   WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
   General Public License for more details.

   You should have received a copy of the GNU Lesser General Public License
   along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
 ***/

 #include <pulse/mainloop-api.h>
 #include <pulse/cdecl.h>
 #include <pulse/version.h>

 PA_C_DECL_BEGIN

 /** \page threaded_mainloop Threaded Main Loop
  *
  * \section overv_sec Overview
  *
  * The threaded main loop implementation is a special version of the primary
  * main loop implementation (see \ref mainloop). For the basic design, see
  * its documentation.
  *
  * The added feature in the threaded main loop is that it spawns a new thread
  * that runs the real main loop. This allows a synchronous application to use
  * the asynchronous API without risking stalling the PulseAudio library.
  *
  * \section creat_sec Creation
  *
  * A pa_threaded_mainloop object is created using pa_threaded_mainloop_new().
  * This will only allocate the required structures though, so to use it the
  * thread must also be started. This is done through
  * pa_threaded_mainloop_start(), after which you can start using the main loop.
  *
  * \section destr_sec Destruction
  *
  * When the PulseAudio connection has been terminated, the thread must be
  * stopped and the resources freed. Stopping the thread is done using
  * pa_threaded_mainloop_stop(), which must be called without the lock (see
  * below) held. When that function returns, the thread is stopped and the
  * pa_threaded_mainloop object can be freed using pa_threaded_mainloop_free().
  *
  * \section lock_sec Locking
  *
  * Since the PulseAudio API doesn't allow concurrent accesses to objects,
  * a locking scheme must be used to guarantee safe usage. The threaded main
  * loop API provides such a scheme through the functions
  * pa_threaded_mainloop_lock() and pa_threaded_mainloop_unlock().
  *
  * The lock is recursive, so it's safe to use it multiple times from the same
  * thread. Just make sure you call pa_threaded_mainloop_unlock() the same
  * number of times you called pa_threaded_mainloop_lock().
  *
  * The lock needs to be held whenever you call any PulseAudio function that
  * uses an object associated with this main loop. Make sure you do not hold
  * on to the lock more than necessary though, as the threaded main loop stops
  * while the lock is held.
  *
  * Example:
  *
  * \code
  * void my_check_stream_func(pa_threaded_mainloop *m, pa_stream *s) {
  *     pa_stream_state_t state;
  *
  *     pa_threaded_mainloop_lock(m);
  *
  *     state = pa_stream_get_state(s);
  *
  *     pa_threaded_mainloop_unlock(m);
  *
  *     if (state == PA_STREAM_READY)
  *         printf("Stream is ready!");
  *     else
  *         printf("Stream is not ready!");
  * }
  * \endcode
  *
  * \section cb_sec Callbacks
  *
  * Callbacks in PulseAudio are asynchronous, so they require extra care when
  * using them together with a threaded main loop.
  *
  * The easiest way to turn the callback based operations into synchronous
  * ones, is to simply wait for the callback to be called and continue from
  * there. This is the approach chosen in PulseAudio's threaded API.
  *
  * \subsection basic_subsec Basic callbacks
  *
  * For the basic case, where all that is required is to wait for the callback
  * to be invoked, the code should look something like this:
  *
  * Example:
  *
  * \code
  * static void my_drain_callback(pa_stream *s, int success, void *userdata) {
  *     pa_threaded_mainloop *m;
  *
  *     m = userdata;
  *     assert(m);
  *
  *     pa_threaded_mainloop_signal(m, 0);
  * }
  *
  * void my_drain_stream_func(pa_threaded_mainloop *m, pa_stream *s) {
  *     pa_operation *o;
  *
  *     pa_threaded_mainloop_lock(m);
  *
  *     o = pa_stream_drain(s, my_drain_callback, m);
  *     assert(o);
  *
  *     while (pa_operation_get_state(o) == PA_OPERATION_RUNNING)
  *         pa_threaded_mainloop_wait(m);
  *
  *     pa_operation_unref(o);
  *
  *     pa_threaded_mainloop_unlock(m);
  * }
  * \endcode
  *
  * The main function, my_drain_stream_func(), will wait for the callback to
  * be called using pa_threaded_mainloop_wait().
  *
  * If your application is multi-threaded, then this waiting must be
  * done inside a while loop. The reason for this is that multiple
  * threads might be using pa_threaded_mainloop_wait() at the same
  * time. Each thread must therefore verify that it was its callback
  * that was invoked. Also the underlying OS synchronization primitives
  * are usually not free of spurious wake-ups, so a
  * pa_threaded_mainloop_wait() must be called within a loop even if
  * you have only one thread waiting.
  *
  * The callback, my_drain_callback(), indicates to the main function that it
  * has been called using pa_threaded_mainloop_signal().
  *
  * As you can see, pa_threaded_mainloop_wait() may only be called with
  * the lock held. The same thing is true for pa_threaded_mainloop_signal(),
  * but as the lock is held before the callback is invoked, you do not have to
  * deal with that.
  *
  * The functions will not dead lock because the wait function will release
  * the lock before waiting and then regrab it once it has been signalled.
  * For those of you familiar with threads, the behaviour is that of a
  * condition variable.
  *
  * \subsection data_subsec Data callbacks
  *
  * For many callbacks, simply knowing that they have been called is
  * insufficient. The callback also receives some data that is desired. To
  * access this data safely, we must extend our example a bit:
  *
  * \code
  * static int * volatile drain_result = NULL;
  *
  * static void my_drain_callback(pa_stream*s, int success, void *userdata) {
  *     pa_threaded_mainloop *m;
  *
  *     m = userdata;
  *     assert(m);
  *
  *     drain_result = &success;
  *
  *     pa_threaded_mainloop_signal(m, 1);
  * }
  *
  * void my_drain_stream_func(pa_threaded_mainloop *m, pa_stream *s) {
  *     pa_operation *o;
  *
  *     pa_threaded_mainloop_lock(m);
  *
  *     o = pa_stream_drain(s, my_drain_callback, m);
  *     assert(o);
  *
  *     while (drain_result == NULL)
  *         pa_threaded_mainloop_wait(m);
  *
  *     pa_operation_unref(o);
  *
  *     if (*drain_result)
  *         printf("Success!");
  *     else
  *         printf("Bitter defeat...");
  *
  *     pa_threaded_mainloop_accept(m);
  *
  *     pa_threaded_mainloop_unlock(m);
  * }
  * \endcode
  *
  * The example is a bit silly as it would probably have been easier to just
  * copy the contents of success, but for larger data structures this can be
  * wasteful.
  *
  * The difference here compared to the basic callback is the value 1 passed
  * to pa_threaded_mainloop_signal() and the call to
  * pa_threaded_mainloop_accept(). What will happen is that
  * pa_threaded_mainloop_signal() will signal the main function and then wait.
  * The main function is then free to use the data in the callback until
  * pa_threaded_mainloop_accept() is called, which will allow the callback
  * to continue.
  *
  * Note that pa_threaded_mainloop_accept() must be called some time between
  * exiting the while loop and unlocking the main loop! Failure to do so will
  * result in a race condition. I.e. it is not ok to release the lock and
  * regrab it before calling pa_threaded_mainloop_accept().
  *
  * \subsection async_subsec Asynchronous callbacks
  *
  * PulseAudio also has callbacks that are completely asynchronous, meaning
  * that they can be called at any time. The threaded main loop API provides
  * the locking mechanism to handle concurrent accesses, but nothing else.
  * Applications will have to handle communication from the callback to the
  * main program through their own mechanisms.
  *
  * The callbacks that are completely asynchronous are:
  *
  * \li State callbacks for contexts, streams, etc.
  * \li Subscription notifications
  */

 /** \file
  *
  * A thread based event loop implementation based on pa_mainloop. The
  * event loop is run in a helper thread in the background. A few
  * synchronization primitives are available to access the objects
  * attached to the event loop safely.
  *
  * See also \subpage threaded_mainloop
  */

 /** An opaque threaded main loop object */
 typedef struct pa_threaded_mainloop pa_threaded_mainloop;

 /** Allocate a new threaded main loop object. You have to call
  * pa_threaded_mainloop_start() before the event loop thread starts
  * running. Free with pa_threaded_mainloop_free. */
 pa_threaded_mainloop *pa_threaded_mainloop_new(void);

 /** Free a threaded main loop object. If the event loop thread is
  * still running, terminate it with pa_threaded_mainloop_stop()
  * first. */
 void pa_threaded_mainloop_free(pa_threaded_mainloop* m);

 /** Start the event loop thread. Returns zero on success, negative on error. */
 int pa_threaded_mainloop_start(pa_threaded_mainloop *m);

 /** Terminate the event loop thread cleanly. Make sure to unlock the
  * mainloop object before calling this function. */
 void pa_threaded_mainloop_stop(pa_threaded_mainloop *m);

 /** Lock the event loop object, effectively blocking the event loop
  * thread from processing events. You can use this to enforce
  * exclusive access to all objects attached to the event loop. This
  * lock is recursive. This function may not be called inside the event
  * loop thread. Events that are dispatched from the event loop thread
  * are executed with this lock held. */
 void pa_threaded_mainloop_lock(pa_threaded_mainloop *m);

 /** Unlock the event loop object, inverse of pa_threaded_mainloop_lock(). */
 void pa_threaded_mainloop_unlock(pa_threaded_mainloop *m);

 /** Wait for an event to be signalled by the event loop thread. You
  * can use this to pass data from the event loop thread to the main
  * thread in a synchronized fashion. This function may not be called
  * inside the event loop thread. Prior to this call the event loop
  * object needs to be locked using pa_threaded_mainloop_lock(). While
  * waiting the lock will be released. Immediately before returning it
  * will be acquired again. This function may spuriously wake up even
  * without pa_threaded_mainloop_signal() being called. You need to
  * make sure to handle that! */
 void pa_threaded_mainloop_wait(pa_threaded_mainloop *m);

 /** Signal all threads waiting for a signalling event in
  * pa_threaded_mainloop_wait(). If wait_for_accept is non-zero, do
  * not return before the signal was accepted by a
  * pa_threaded_mainloop_accept() call. While waiting for that condition
  * the event loop object is unlocked. */
 void pa_threaded_mainloop_signal(pa_threaded_mainloop *m, int wait_for_accept);

 /** Accept a signal from the event thread issued with
  * pa_threaded_mainloop_signal(). This call should only be used in
  * conjunction with pa_threaded_mainloop_signal() with a non-zero
  * wait_for_accept value.  */
 void pa_threaded_mainloop_accept(pa_threaded_mainloop *m);

 /** Return the return value as specified with the main loop's
  * pa_mainloop_quit() routine. */
 int pa_threaded_mainloop_get_retval(pa_threaded_mainloop *m);

 /** Return the main loop abstraction layer vtable for this main loop.
  * There is no need to free this object as it is owned by the loop
  * and is destroyed when the loop is freed. */
 pa_mainloop_api* pa_threaded_mainloop_get_api(pa_threaded_mainloop*m);

 /** Returns non-zero when called from within the event loop thread. \since 0.9.7 */
 int pa_threaded_mainloop_in_thread(pa_threaded_mainloop *m);

 /** Sets the name of the thread. \since 5.0 */
 void pa_threaded_mainloop_set_name(pa_threaded_mainloop *m, const char *name);

 PA_C_DECL_END

 #endif
	#ifndef foothreadmainloophfoo
	#define foothreadmainloophfoo

	/***
	This file is part of PulseAudio.

	Copyright 2006 Lennart Poettering
	Copyright 2006 Pierre Ossman <ossman@cendio.se> for Cendio AB

	PulseAudio is free software; you can redistribute it and/or modify
	it under the terms of the GNU Lesser General Public License as published
	by the Free Software Foundation; either version 2.1 of the License,
	or (at your option) any later version.

	PulseAudio is distributed in the hope that it will be useful, but
	WITHOUT ANY WARRANTY; without even the implied warranty of
	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
	General Public License for more details.

	You should have received a copy of the GNU Lesser General Public License
	along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
	***/

	#include <pulse/mainloop-api.h>
	#include <pulse/cdecl.h>
	#include <pulse/version.h>

	PA_C_DECL_BEGIN

	/** \page threaded_mainloop Threaded Main Loop
	*
	* \section overv_sec Overview
	*
	* The threaded main loop implementation is a special version of the primary
	* main loop implementation (see \ref mainloop). For the basic design, see
	* its documentation.
	*
	* The added feature in the threaded main loop is that it spawns a new thread
	* that runs the real main loop. This allows a synchronous application to use
	* the asynchronous API without risking stalling the PulseAudio library.
	*
	* \section creat_sec Creation
	*
	* A pa_threaded_mainloop object is created using pa_threaded_mainloop_new().
	* This will only allocate the required structures though, so to use it the
	* thread must also be started. This is done through
	* pa_threaded_mainloop_start(), after which you can start using the main loop.
	*
	* \section destr_sec Destruction
	*
	* When the PulseAudio connection has been terminated, the thread must be
	* stopped and the resources freed. Stopping the thread is done using
	* pa_threaded_mainloop_stop(), which must be called without the lock (see
	* below) held. When that function returns, the thread is stopped and the
	* pa_threaded_mainloop object can be freed using pa_threaded_mainloop_free().
	*
	* \section lock_sec Locking
	*
	* Since the PulseAudio API doesn't allow concurrent accesses to objects,
	* a locking scheme must be used to guarantee safe usage. The threaded main
	* loop API provides such a scheme through the functions
	* pa_threaded_mainloop_lock() and pa_threaded_mainloop_unlock().
	*
	* The lock is recursive, so it's safe to use it multiple times from the same
	* thread. Just make sure you call pa_threaded_mainloop_unlock() the same
	* number of times you called pa_threaded_mainloop_lock().
	*
	* The lock needs to be held whenever you call any PulseAudio function that
	* uses an object associated with this main loop. Make sure you do not hold
	* on to the lock more than necessary though, as the threaded main loop stops
	* while the lock is held.
	*
	* Example:
	*
	* \code
	* void my_check_stream_func(pa_threaded_mainloop m, pa_stream s) {
	* pa_stream_state_t state;
	*
	* pa_threaded_mainloop_lock(m);
	*
	* state = pa_stream_get_state(s);
	*
	* pa_threaded_mainloop_unlock(m);
	*
	* if (state == PA_STREAM_READY)
	* printf("Stream is ready!");
	* else
	* printf("Stream is not ready!");
	* }
	* \endcode
	*
	* \section cb_sec Callbacks
	*
	* Callbacks in PulseAudio are asynchronous, so they require extra care when
	* using them together with a threaded main loop.
	*
	* The easiest way to turn the callback based operations into synchronous
	* ones, is to simply wait for the callback to be called and continue from
	* there. This is the approach chosen in PulseAudio's threaded API.
	*
	* \subsection basic_subsec Basic callbacks
	*
	* For the basic case, where all that is required is to wait for the callback
	* to be invoked, the code should look something like this:
	*
	* Example:
	*
	* \code
	* static void my_drain_callback(pa_stream s, int success, void userdata) {
	* pa_threaded_mainloop *m;
	*
	* m = userdata;
	* assert(m);
	*
	* pa_threaded_mainloop_signal(m, 0);
	* }
	*
	* void my_drain_stream_func(pa_threaded_mainloop m, pa_stream s) {
	* pa_operation *o;
	*
	* pa_threaded_mainloop_lock(m);
	*
	* o = pa_stream_drain(s, my_drain_callback, m);
	* assert(o);
	*
	* while (pa_operation_get_state(o) == PA_OPERATION_RUNNING)
	* pa_threaded_mainloop_wait(m);
	*
	* pa_operation_unref(o);
	*
	* pa_threaded_mainloop_unlock(m);
	* }
	* \endcode
	*
	* The main function, my_drain_stream_func(), will wait for the callback to
	* be called using pa_threaded_mainloop_wait().
	*
	* If your application is multi-threaded, then this waiting must be
	* done inside a while loop. The reason for this is that multiple
	* threads might be using pa_threaded_mainloop_wait() at the same
	* time. Each thread must therefore verify that it was its callback
	* that was invoked. Also the underlying OS synchronization primitives
	* are usually not free of spurious wake-ups, so a
	* pa_threaded_mainloop_wait() must be called within a loop even if
	* you have only one thread waiting.
	*
	* The callback, my_drain_callback(), indicates to the main function that it
	* has been called using pa_threaded_mainloop_signal().
	*
	* As you can see, pa_threaded_mainloop_wait() may only be called with
	* the lock held. The same thing is true for pa_threaded_mainloop_signal(),
	* but as the lock is held before the callback is invoked, you do not have to
	* deal with that.
	*
	* The functions will not dead lock because the wait function will release
	* the lock before waiting and then regrab it once it has been signalled.
	* For those of you familiar with threads, the behaviour is that of a
	* condition variable.
	*
	* \subsection data_subsec Data callbacks
	*
	* For many callbacks, simply knowing that they have been called is
	* insufficient. The callback also receives some data that is desired. To
	* access this data safely, we must extend our example a bit:
	*
	* \code
	* static int * volatile drain_result = NULL;
	*
	* static void my_drain_callback(pa_streams, int success, void userdata) {
	* pa_threaded_mainloop *m;
	*
	* m = userdata;
	* assert(m);
	*
	* drain_result = &success;
	*
	* pa_threaded_mainloop_signal(m, 1);
	* }
	*
	* void my_drain_stream_func(pa_threaded_mainloop m, pa_stream s) {
	* pa_operation *o;
	*
	* pa_threaded_mainloop_lock(m);
	*
	* o = pa_stream_drain(s, my_drain_callback, m);
	* assert(o);
	*
	* while (drain_result == NULL)
	* pa_threaded_mainloop_wait(m);
	*
	* pa_operation_unref(o);
	*
	* if (*drain_result)
	* printf("Success!");
	* else
	* printf("Bitter defeat...");
	*
	* pa_threaded_mainloop_accept(m);
	*
	* pa_threaded_mainloop_unlock(m);
	* }
	* \endcode
	*
	* The example is a bit silly as it would probably have been easier to just
	* copy the contents of success, but for larger data structures this can be
	* wasteful.
	*
	* The difference here compared to the basic callback is the value 1 passed
	* to pa_threaded_mainloop_signal() and the call to
	* pa_threaded_mainloop_accept(). What will happen is that
	* pa_threaded_mainloop_signal() will signal the main function and then wait.
	* The main function is then free to use the data in the callback until
	* pa_threaded_mainloop_accept() is called, which will allow the callback
	* to continue.
	*
	* Note that pa_threaded_mainloop_accept() must be called some time between
	* exiting the while loop and unlocking the main loop! Failure to do so will
	* result in a race condition. I.e. it is not ok to release the lock and
	* regrab it before calling pa_threaded_mainloop_accept().
	*
	* \subsection async_subsec Asynchronous callbacks
	*
	* PulseAudio also has callbacks that are completely asynchronous, meaning
	* that they can be called at any time. The threaded main loop API provides
	* the locking mechanism to handle concurrent accesses, but nothing else.
	* Applications will have to handle communication from the callback to the
	* main program through their own mechanisms.
	*
	* The callbacks that are completely asynchronous are:
	*
	* \li State callbacks for contexts, streams, etc.
	* \li Subscription notifications
	*/

	/** \file
	*
	* A thread based event loop implementation based on pa_mainloop. The
	* event loop is run in a helper thread in the background. A few
	* synchronization primitives are available to access the objects
	* attached to the event loop safely.
	*
	* See also \subpage threaded_mainloop
	*/

	/** An opaque threaded main loop object */
	typedef struct pa_threaded_mainloop pa_threaded_mainloop;

	/** Allocate a new threaded main loop object. You have to call
	* pa_threaded_mainloop_start() before the event loop thread starts
	* running. Free with pa_threaded_mainloop_free. */
	pa_threaded_mainloop *pa_threaded_mainloop_new(void);

	/** Free a threaded main loop object. If the event loop thread is
	* still running, terminate it with pa_threaded_mainloop_stop()
	* first. */
	void pa_threaded_mainloop_free(pa_threaded_mainloop* m);

	/** Start the event loop thread. Returns zero on success, negative on error. */
	int pa_threaded_mainloop_start(pa_threaded_mainloop *m);

	/** Terminate the event loop thread cleanly. Make sure to unlock the
	* mainloop object before calling this function. */
	void pa_threaded_mainloop_stop(pa_threaded_mainloop *m);

	/** Lock the event loop object, effectively blocking the event loop
	* thread from processing events. You can use this to enforce
	* exclusive access to all objects attached to the event loop. This
	* lock is recursive. This function may not be called inside the event
	* loop thread. Events that are dispatched from the event loop thread
	* are executed with this lock held. */
	void pa_threaded_mainloop_lock(pa_threaded_mainloop *m);

	/** Unlock the event loop object, inverse of pa_threaded_mainloop_lock(). */
	void pa_threaded_mainloop_unlock(pa_threaded_mainloop *m);

	/** Wait for an event to be signalled by the event loop thread. You
	* can use this to pass data from the event loop thread to the main
	* thread in a synchronized fashion. This function may not be called
	* inside the event loop thread. Prior to this call the event loop
	* object needs to be locked using pa_threaded_mainloop_lock(). While
	* waiting the lock will be released. Immediately before returning it
	* will be acquired again. This function may spuriously wake up even
	* without pa_threaded_mainloop_signal() being called. You need to
	* make sure to handle that! */
	void pa_threaded_mainloop_wait(pa_threaded_mainloop *m);

	/** Signal all threads waiting for a signalling event in
	* pa_threaded_mainloop_wait(). If wait_for_accept is non-zero, do
	* not return before the signal was accepted by a
	* pa_threaded_mainloop_accept() call. While waiting for that condition
	* the event loop object is unlocked. */
	void pa_threaded_mainloop_signal(pa_threaded_mainloop *m, int wait_for_accept);

	/** Accept a signal from the event thread issued with
	* pa_threaded_mainloop_signal(). This call should only be used in
	* conjunction with pa_threaded_mainloop_signal() with a non-zero
	* wait_for_accept value. */
	void pa_threaded_mainloop_accept(pa_threaded_mainloop *m);

	/** Return the return value as specified with the main loop's
	* pa_mainloop_quit() routine. */
	int pa_threaded_mainloop_get_retval(pa_threaded_mainloop *m);

	/** Return the main loop abstraction layer vtable for this main loop.
	* There is no need to free this object as it is owned by the loop
	* and is destroyed when the loop is freed. */
	pa_mainloop_api* pa_threaded_mainloop_get_api(pa_threaded_mainloop*m);

	/** Returns non-zero when called from within the event loop thread. \since 0.9.7 */
	int pa_threaded_mainloop_in_thread(pa_threaded_mainloop *m);

	/** Sets the name of the thread. \since 5.0 */
	void pa_threaded_mainloop_set_name(pa_threaded_mainloop m, const char name);

	PA_C_DECL_END

	#endif