| // Copyright 2014 The Cobalt Authors. All Rights Reserved. |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| #include "cobalt/browser/switches.h" |
| #include <map> |
| |
| namespace cobalt { |
| namespace browser { |
| namespace switches { |
| |
| // NOTE: If a new switch is to be defined, the switch along with its help |
| // message needs to be inserted to the help_map manually. |
| #if defined(ENABLE_DEBUG_COMMAND_LINE_SWITCHES) |
| |
| const char kAudioDecoderStub[] = "audio_decoder_stub"; |
| const char kAudioDecoderStubHelp[] = |
| "Decode audio data using ShellRawAudioDecoderStub."; |
| |
| const char kDebugConsoleMode[] = "debug_console"; |
| const char kDebugConsoleModeHelp[] = |
| "Switches different debug console modes: on | hud | off"; |
| |
| #if defined(ENABLE_REMOTE_DEBUGGING) |
| const char kWaitForWebDebugger[] = "wait_for_web_debugger"; |
| const char kWaitForWebDebuggerHelp[] = |
| "Waits for remote web debugger to connect before loading the page. A " |
| "number may optionally be specified to indicate which in a sequence of " |
| "page loads should wait. For example, if the startup URL is a loader and " |
| "that loader changes window.location to the URL of the actual app, then " |
| "specify 1 to debug the loader or 2 to debug the app."; |
| #endif // ENABLE_REMOTE_DEBUGGING |
| |
| const char kDisableImageAnimations[] = "disable_image_animations"; |
| const char kDisableImageAnimationsHelp[] = |
| "Enables/disables animations on animated images (e.g. animated WebP)."; |
| |
| const char kForceDeterministicRendering[] = "force_deterministic_rendering"; |
| const char kForceDeterministicRenderingHelp[] = |
| "Forces the renderer to avoid doing anything that may result in " |
| "1-pixel-off non-deterministic rendering output. For example, a renderer " |
| "may implement an optimization where text glyphs are rendered once and " |
| "cached and re-used in situations where the cached glyph is approximately " |
| "very similar, even if it is not exactly the same. Setting this flag " |
| "avoids that kind of behavior, allowing strict screen-diff tests to pass."; |
| |
| const char kDisableRasterizerCaching[] = "disable_rasterizer_caching"; |
| const char kDisableRasterizerCachingHelp[] = |
| "Disables caching of rasterized render tree nodes; caching improves " |
| "performance but may result in sub-pixel differences. Note that this " |
| "is deprecated, the '--force_deterministic_rendering' flag should be " |
| "used instead which does the same thing."; |
| |
| const char kDisableSignIn[] = "disable_sign_in"; |
| const char kDisableSignInHelp[] = |
| "Disables sign-in on platforms that use H5VCC Account Manager."; |
| |
| const char kDisableSplashScreenOnReloads[] = "disable_splash_screen_on_reloads"; |
| const char kDisableSplashScreenOnReloadsHelp[] = |
| "Disables the splash screen on reloads; instead it will only appear on the " |
| "first navigate."; |
| |
| const char kDisableWebDriver[] = "disable_webdriver"; |
| const char kDisableWebDriverHelp[] = "Do not create the WebDriver server."; |
| |
| const char kDisableWebmVp9[] = "disable_webm_vp9"; |
| const char kDisableWebmVp9Help[] = "Disable webm/vp9."; |
| |
| const char kExtraWebFileDir[] = "web_file_path"; |
| const char kExtraWebFileDirHelp[] = |
| "Additional base directory for accessing web files via file://."; |
| |
| const char kFakeMicrophone[] = "fake_microphone"; |
| const char kFakeMicrophoneHelp[] = |
| "If this flag is set, fake microphone will be used to mock the user voice " |
| "input."; |
| |
| const char kIgnoreCertificateErrors[] = "ignore_certificate_errors"; |
| const char kIgnoreCertificateErrorsHelp[] = |
| "Setting this switch causes all certificate errors to be ignored."; |
| |
| const char kInputFuzzer[] = "input_fuzzer"; |
| const char kInputFuzzerHelp[] = |
| "If this flag is set, input will be continuously generated randomly " |
| "instead of taken from an external input device (like a controller)."; |
| |
| const char kMemoryTracker[] = "memory_tracker"; |
| const char kMemoryTrackerHelp[] = |
| "Enables memory tracking by installing the memory tracker on startup."; |
| |
| const char kMinCompatibilityVersion[] = "min_compatibility_version"; |
| const char kMinCompatibilityVersionHelp[] = |
| "The minimum version of Cobalt that will be checked during compatibility " |
| "validations."; |
| |
| const char kMinLogLevel[] = "min_log_level"; |
| const char kMinLogLevelHelp[] = |
| "Set the minimum logging level: info|warning|error|fatal."; |
| |
| const char kNullAudioStreamer[] = "null_audio_streamer"; |
| const char kNullAudioStreamerHelp[] = |
| "Use the NullAudioStreamer. Audio will be decoded but will not play back. " |
| "No audio output library will be initialized or used."; |
| |
| const char kNullSavegame[] = "null_savegame"; |
| const char kNullSavegameHelp[] = |
| "Setting NullSavegame will result in no data being read from previous " |
| "sessions and no data being persisted to future sessions. It effectively " |
| "makes the app run as if it has no local storage."; |
| |
| const char kDisablePartialLayout[] = "disable_partial_layout"; |
| const char kDisablePartialLayoutHelp[] = |
| "Causes layout to re-compute the boxes for the entire DOM rather than " |
| "re-using boxes for elements that have not been invalidated."; |
| |
| const char kProd[] = "prod"; |
| const char kProdHelp[] = |
| "Several checks are not enabled by default in non-production(gold) build. " |
| "Use this flag to simulate production build behavior."; |
| |
| const char kProxy[] = "proxy"; |
| const char kProxyHelp[] = |
| "Specifies a proxy to use for network connections. " |
| "See comments in net::ProxyRules::ParseFromString() for more information. " |
| "If you do not explicitly provide a scheme when providing the proxy server " |
| "URL, it will default to HTTP. So for example, for a HTTPS proxy you " |
| "would want to specify '--proxy=\"https=https://localhost:443\"' instead " |
| "of '--proxy=\"https=localhost:443\"'."; |
| |
| const char kRemoteDebuggingPort[] = "remote_debugging_port"; |
| const char kRemoteDebuggingPortHelp[] = |
| "Creates a remote debugging server and listens on the specified port."; |
| |
| const char kRequireCSP[] = "require_csp"; |
| const char kRequireCSPHelp[] = |
| "Forbid Cobalt to start without receiving csp headers which is enabled by " |
| "default in production."; |
| |
| const char kRequireHTTPSLocation[] = "require_https"; |
| const char kRequireHTTPSLocationHelp[] = |
| "Ask Cobalt to only accept https url which is enabled by default in " |
| "production."; |
| |
| const char kShutdownAfter[] = "shutdown_after"; |
| const char kShutdownAfterHelp[] = |
| "If this flag is set, Cobalt will automatically shutdown after the " |
| "specified number of seconds have passed."; |
| |
| const char kStubImageDecoder[] = "stub_image_decoder"; |
| const char kStubImageDecoderHelp[] = |
| "Decode all images using StubImageDecoder."; |
| |
| const char kSuspendFuzzer[] = "suspend_fuzzer"; |
| const char kSuspendFuzzerHelp[] = |
| "If this flag is set, alternating calls to |SbSystemRequestSuspend| and " |
| "|SbSystemRequestUnpause| will be made periodically."; |
| |
| const char kTimedTrace[] = "timed_trace"; |
| const char kTimedTraceHelp[] = |
| "If this is set, then a trace (see base/debug/trace_eventh.h) is started " |
| "on Cobalt startup. A value must also be specified for this switch, " |
| "which is the duration in seconds of how long the trace will be done " |
| "for before ending and saving the results to disk. Results will be saved" |
| " to the file timed_trace.json in the log output directory."; |
| |
| const char kUserAgent[] = "user_agent"; |
| const char kUserAgentHelp[] = |
| "Specifies a custom user agent for device simulations. The expected " |
| "format is \"Mozilla/5.0 ('os_name_and_version') Cobalt/'cobalt_version'." |
| "'cobalt_build_version_number'-'build_configuration' (unlike Gecko) " |
| "'javascript_engine_version' 'rasterizer_type' 'starboard_version', " |
| "'network_operator'_'device_type'_'chipset_model_number'_'model_year'/" |
| "'firmware_version' ('brand', 'model', 'connection_type') 'aux_field'\"."; |
| |
| const char kUserAgentOsNameVersion[] = "user_agent_os_name_version"; |
| const char kUserAgentOsNameVersionHelp[] = |
| "Specifies a custom 'os_name_and_version' user agent field with otherwise " |
| "default user agent fields. Example: \"X11; Linux x86_64\"."; |
| |
| const char kUseTTS[] = "use_tts"; |
| const char kUseTTSHelp[] = |
| "Enable text-to-speech functionality, for platforms that implement the " |
| "speech synthesis API. If the platform doesn't have speech synthesis, " |
| "TTSLogger will be used instead."; |
| |
| extern const char kVideoDecoderStub[] = "video_decoder_stub"; |
| extern const char kVideoDecoderStubHelp[] = |
| "Decode video data using ShellRawVideoDecoderStub."; |
| |
| const char kWebDriverListenIp[] = "webdriver_listen_ip"; |
| const char kWebDriverListenIpHelp[] = |
| "IP that the WebDriver server should be listening on. (INADDR_ANY if " |
| "unspecified)."; |
| |
| const char kWebDriverPort[] = "webdriver_port"; |
| const char kWebDriverPortHelp[] = |
| "Port that the WebDriver server should be listening on."; |
| |
| #if SB_HAS(ON_SCREEN_KEYBOARD) |
| const char kDisableOnScreenKeyboard[] = "disable_on_screen_keyboard"; |
| const char kDisableOnScreenKeyboardHelp[] = |
| "Disable the on screen keyboard for testing."; |
| #endif // SB_HAS(ON_SCREEN_KEYBOARD) |
| |
| #endif // ENABLE_DEBUG_COMMAND_LINE_SWITCHES |
| |
| const char kDisableJavaScriptJit[] = "disable_javascript_jit"; |
| const char kDisableJavaScriptJitHelp[] = |
| "Specifies that javascript jit should be disabled."; |
| |
| const char kDisableTimerResolutionLimit[] = "disable_timer_resolution_limit"; |
| const char kDisableTimerResolutionLimitHelp[] = |
| "By default, window.performance.now() will return values at a clamped " |
| "minimum resolution of 20us. By specifying this flag, the limit will be " |
| "removed and the resolution will be 1us (or larger depending on the " |
| "platform."; |
| |
| const char kEnableMapToMeshRectanglar[] = "enable_map_to_mesh_rectangular"; |
| const char kEnableMapToMeshRectanglarHelp[] = |
| "If toggled and map-to-mesh is supported on this platform, this allows it " |
| "to accept the 'rectangular' keyword. Useful to get rectangular stereo " |
| "video on platforms that do not support stereoscopy natively, letting the " |
| "client apply a stereo mesh projection (one that differs for each eye)."; |
| |
| const char kForceMigrationForStoragePartitioning[] = |
| "force_migration_for_storage_partitioning"; |
| const char kForceMigrationForStoragePartitioningHelp[] = |
| "Overrides the default storage migration policy when upgrading to " |
| "partitioned storage and forces data migration regardless of the" |
| "initial app url. The default policy is to migrate data only for" |
| "https://www.youtube.com/tv."; |
| |
| // If toggled, framerate statistics will be printed to stdout after each |
| // animation completes, or after a maximum number of frames has been collected. |
| const char kFPSPrint[] = "fps_stdout"; |
| const char kFPSPrintHelp[] = |
| "If toggled, framerate statistics will be printed to stdout after each " |
| "animation completes, or after a maximum number of frames has been " |
| "collected."; |
| |
| const char kFPSOverlay[] = "fps_overlay"; |
| const char kFPSOverlayHelp[] = |
| "If toggled, framerate statistics will be displayed in an on-screen " |
| "overlay and updated after each animation completes, or after a maximum " |
| "number of frames has been collected."; |
| |
| const char kHelp[] = "help"; |
| const char kHelpHelp[] = "Prints help information of cobalt command"; |
| |
| const char kImageCacheSizeInBytes[] = "image_cache_size_in_bytes"; |
| const char kImageCacheSizeInBytesHelp[] = |
| "Determines the capacity of the image cache which manages image " |
| "surfaces300 downloaded from a web page. While it depends on the " |
| "platform, often (and ideally) these images are cached within GPU memory."; |
| |
| const char kInitialURL[] = "url"; |
| const char kInitialURLHelp[] = |
| "Setting this switch defines the startup URL that Cobalt will use. If no " |
| "value is set, a default URL will be used."; |
| |
| const char kJavaScriptGcThresholdInBytes[] = "javascript_gc_threshold_in_bytes"; |
| const char kJavaScriptGcThresholdInBytesHelp[] = |
| "Specifies the javascript gc threshold. When this amount of garbage has " |
| "collected then the garbage collector will begin running."; |
| |
| const char kLocalStoragePartitionUrl[] = "local_storage_partition_url"; |
| const char kLocalStoragePartitionUrlHelp[] = |
| "Overrides the default storage partition with a custom partition URL to " |
| "use for local storage. The provided URL is canonicalized."; |
| |
| const char kMaxCobaltCpuUsage[] = "max_cobalt_cpu_usage"; |
| const char kMaxCobaltCpuUsageHelp[] = |
| "Specifies the maximum CPU usage of the cobalt."; |
| |
| const char kMaxCobaltGpuUsage[] = "max_cobalt_gpu_usage"; |
| const char kMaxCobaltGpuUsageHelp[] = |
| "Specifies the maximum GPU usage of the cobalt."; |
| |
| const char kOffscreenTargetCacheSizeInBytes[] = |
| "offscreen_target_cache_size_in_bytes"; |
| const char kOffscreenTargetCacheSizeInBytesHelp[] = |
| "Determines the amount of GPU memory the offscreen target atlases will " |
| "use. This is specific to the direct-GLES rasterizer and caches any render " |
| "tree nodes which require skia for rendering. Two atlases will be " |
| "allocated from this memory or multiple atlases of the frame size if the " |
| "limit allows. It is recommended that enough memory be reserved for two " |
| "RGBA atlases about a quarter of the frame size."; |
| |
| const char kQrCodeOverlay[] = "qr_code_overlay"; |
| const char kQrCodeOverlayHelp[] = |
| "Display QrCode based overlay information. These information can be used" |
| " for performance tuning or playback quality check."; |
| |
| const char kReduceCpuMemoryBy[] = "reduce_cpu_memory_by"; |
| const char kReduceCpuMemoryByHelp[] = |
| "Reduces the cpu-memory of the system by this amount. This causes AutoMem " |
| "to reduce the runtime size of the CPU-Memory caches."; |
| |
| const char kReduceGpuMemoryBy[] = "reduce_gpu_memory_by"; |
| const char kReduceGpuMemoryByHelp[] = |
| "Reduces the gpu-memory of the system by this amount. This causes AutoMem " |
| "to reduce the runtime size of the GPU-Memory caches."; |
| |
| const char kRemoteTypefaceCacheSizeInBytes[] = |
| "remote_typeface_cache_size_in_bytes"; |
| const char kRemoteTypefaceCacheSizeInBytesHelp[] = |
| "Determines the capacity of the remote typefaces cache which manages all " |
| "typefaces downloaded from a web page."; |
| |
| const char kRetainRemoteTypefaceCacheDuringSuspend[] = |
| "retain_remote_typeface_cache_during_suspend"; |
| const char kRetainRemoteTypefaceCacheDuringSuspendHelp[] = |
| "Causes the remote typeface cache to be retained when Cobalt is suspended," |
| " so that they don't need to be re-downloaded when Cobalt is resumed."; |
| |
| const char kScratchSurfaceCacheSizeInBytes[] = |
| "scratch_surface_cache_size_in_bytes"; |
| const char kScratchSurfaceCacheSizeInBytesHelp[] = |
| "Determines the capacity of the scratch surface cache. The scratch surface" |
| " cache facilitates the reuse of temporary offscreen surfaces within a " |
| "single frame. This setting is only relevant when using the " |
| "hardware-accelerated Skia rasterizer. While it depends on the platform, " |
| "this setting may affect GPU memory usage."; |
| |
| const char kSkiaCacheSizeInBytes[] = "skia_cache_size_in_bytes"; |
| const char kSkiaCacheSizeInBytesHelp[] = |
| "Determines the capacity of the skia cache. The Skia cache is maintained " |
| "within Skia and is used to cache the results of complicated effects such " |
| "as shadows, so that Skia draw calls that are used repeatedly across " |
| "frames can be cached into surfaces. This setting is only relevant when " |
| "using the hardware-accelerated Skia rasterizer. While it depends on " |
| "the platform, this setting may affect GPU memory usage."; |
| |
| const char kSkiaTextureAtlasDimensions[] = "skia_atlas_texture_dimensions"; |
| const char kSkiaTextureAtlasDimensionsHelp[] = |
| "Specifies the dimensions of the Skia caching texture atlases (e.g. " |
| "2048x2048)."; |
| |
| const char kSoftwareSurfaceCacheSizeInBytes[] = |
| "software_surface_cache_size_in_bytes"; |
| const char kSoftwareSurfaceCacheSizeInBytesHelp[] = |
| "Only relevant if you are using the Blitter API. Determines the capacity " |
| "of the software surface cache, which is used to " |
| "cache all surfaces that are rendered via a software rasterizer to avoid " |
| "re-rendering them."; |
| |
| const char kFallbackSplashScreenURL[] = "fallback_splash_screen_url"; |
| const char kFallbackSplashScreenURLHelp[] = |
| "Setting this switch defines the splash screen URL that Cobalt will " |
| "use in absence of a web cache. The referenced url should be a content " |
| "file (for example file:///foobar.html) or an embedded file " |
| "(for example h5vcc-embedded://foobar.html) and all files referenced must " |
| "be content or embedded files as well. If none is passed " |
| "(case-insensitive), no splash screen will be constructed. If " |
| "no value is set, the URL in gyp_configuration.gypi or base.gypi will be " |
| "used."; |
| |
| const char kVersion[] = "version"; |
| const char kVersionHelp[] = "Prints the current version of Cobalt"; |
| |
| const char kViewport[] = "viewport"; |
| const char kViewportHelp[] = |
| "Specifies the viewport size: " |
| "width ['x' height ['x' screen_diagonal_inches]]"; |
| |
| const char kVideoPlaybackRateMultiplier[] = "video_playback_rate_multiplier"; |
| const char kVideoPlaybackRateMultiplierHelp[] = |
| "Specifies the multiplier of video playback rate. Set to a value greater " |
| "than 1.0 to play video faster. Set to a value less than 1.0 to play " |
| "video slower."; |
| |
| std::string HelpMessage() { |
| std::string help_message; |
| std::map<const char*, const char*> help_map { |
| #if defined(ENABLE_DEBUG_COMMAND_LINE_SWITCHES) |
| {kAudioDecoderStub, kAudioDecoderStubHelp}, |
| {kDebugConsoleMode, kDebugConsoleModeHelp}, |
| #if defined(ENABLE_REMOTE_DEBUGGING) |
| {kWaitForWebDebugger, kWaitForWebDebuggerHelp}, |
| #endif // ENABLE_REMOTE_DEBUGGING |
| {kDisableImageAnimations, kDisableImageAnimationsHelp}, |
| {kForceDeterministicRendering, kForceDeterministicRenderingHelp}, |
| {kDisableRasterizerCaching, kDisableRasterizerCachingHelp}, |
| {kDisableSignIn, kDisableSignInHelp}, |
| {kDisableSplashScreenOnReloads, kDisableSplashScreenOnReloadsHelp}, |
| {kDisableWebDriver, kDisableWebDriverHelp}, |
| {kDisableWebmVp9, kDisableWebmVp9Help}, |
| {kExtraWebFileDir, kExtraWebFileDirHelp}, |
| {kFakeMicrophone, kFakeMicrophoneHelp}, |
| {kIgnoreCertificateErrors, kIgnoreCertificateErrorsHelp}, |
| {kInputFuzzer, kInputFuzzerHelp}, {kMemoryTracker, kMemoryTrackerHelp}, |
| {kMinCompatibilityVersion, kMinCompatibilityVersionHelp}, |
| {kMinLogLevel, kMinLogLevelHelp}, |
| {kNullAudioStreamer, kNullAudioStreamerHelp}, |
| {kNullSavegame, kNullSavegameHelp}, |
| {kDisablePartialLayout, kDisablePartialLayoutHelp}, {kProd, kProdHelp}, |
| {kProxy, kProxyHelp}, {kRemoteDebuggingPort, kRemoteDebuggingPortHelp}, |
| {kRequireCSP, kRequireCSPHelp}, |
| {kRequireHTTPSLocation, kRequireHTTPSLocationHelp}, |
| {kShutdownAfter, kShutdownAfterHelp}, |
| {kStubImageDecoder, kStubImageDecoderHelp}, |
| {kSuspendFuzzer, kSuspendFuzzerHelp}, {kTimedTrace, kTimedTraceHelp}, |
| {kUserAgent, kUserAgentHelp}, |
| {kUserAgentOsNameVersion, kUserAgentOsNameVersionHelp}, |
| {kUseTTS, kUseTTSHelp}, |
| {kVideoDecoderStub, kVideoDecoderStubHelp}, |
| {kWebDriverListenIp, kWebDriverListenIpHelp}, |
| {kWebDriverPort, kWebDriverPortHelp}, |
| #if SB_HAS(ON_SCREEN_KEYBOARD) |
| {kDisableOnScreenKeyboard, kDisableOnScreenKeyboardHelp}, |
| #endif // SB_HAS(ON_SCREEN_KEYBOARD) |
| #endif // ENABLE_DEBUG_COMMAND_LINE_SWITCHES |
| |
| {kDisableJavaScriptJit, kDisableJavaScriptJitHelp}, |
| {kDisableTimerResolutionLimit, kDisableTimerResolutionLimitHelp}, |
| {kEnableMapToMeshRectanglar, kEnableMapToMeshRectanglarHelp}, |
| {kForceMigrationForStoragePartitioning, |
| kForceMigrationForStoragePartitioningHelp}, |
| {kFPSPrint, kFPSPrintHelp}, {kFPSOverlay, kFPSOverlayHelp}, |
| {kHelp, kHelpHelp}, |
| {kImageCacheSizeInBytes, kImageCacheSizeInBytesHelp}, |
| {kInitialURL, kInitialURLHelp}, |
| {kJavaScriptGcThresholdInBytes, kJavaScriptGcThresholdInBytesHelp}, |
| {kLocalStoragePartitionUrl, kLocalStoragePartitionUrlHelp}, |
| {kMaxCobaltCpuUsage, kMaxCobaltCpuUsageHelp}, |
| {kMaxCobaltGpuUsage, kMaxCobaltGpuUsageHelp}, |
| {kOffscreenTargetCacheSizeInBytes, |
| kOffscreenTargetCacheSizeInBytesHelp}, |
| {kQrCodeOverlay, kQrCodeOverlayHelp}, |
| {kReduceCpuMemoryBy, kReduceCpuMemoryByHelp}, |
| {kReduceGpuMemoryBy, kReduceGpuMemoryByHelp}, |
| {kRemoteTypefaceCacheSizeInBytes, kRemoteTypefaceCacheSizeInBytesHelp}, |
| {kRetainRemoteTypefaceCacheDuringSuspend, |
| kRetainRemoteTypefaceCacheDuringSuspendHelp}, |
| {kScratchSurfaceCacheSizeInBytes, kScratchSurfaceCacheSizeInBytesHelp}, |
| {kSkiaCacheSizeInBytes, kSkiaCacheSizeInBytesHelp}, |
| {kSkiaTextureAtlasDimensions, kSkiaTextureAtlasDimensionsHelp}, |
| {kSoftwareSurfaceCacheSizeInBytes, |
| kSoftwareSurfaceCacheSizeInBytesHelp}, |
| {kFallbackSplashScreenURL, kFallbackSplashScreenURLHelp}, |
| {kVersion, kVersionHelp}, {kViewport, kViewportHelp}, |
| {kVideoPlaybackRateMultiplier, kVideoPlaybackRateMultiplierHelp}, |
| }; |
| |
| for (const auto& switch_message : help_map) { |
| help_message.append(" --") |
| .append(switch_message.first) |
| .append("\n") |
| .append(" ") |
| .append(switch_message.second) |
| .append("\n\n"); |
| } |
| return help_message; |
| } |
| |
| } // namespace switches |
| } // namespace browser |
| } // namespace cobalt |