| // © 2016 and later: Unicode, Inc. and others. | |
| // License & terms of use: http://www.unicode.org/copyright.html | |
| /* | |
| ******************************************************************************* | |
| * | |
| * Copyright (C) 2000-2016, International Business Machines | |
| * Corporation and others. All Rights Reserved. | |
| * | |
| ******************************************************************************* | |
| * file name: genmbcs.cpp | |
| * encoding: UTF-8 | |
| * tab size: 8 (not used) | |
| * indentation:4 | |
| * | |
| * created on: 2000jul06 | |
| * created by: Markus W. Scherer | |
| */ | |
| #include <stdio.h> | |
| #include "unicode/utypes.h" | |
| #include "cstring.h" | |
| #include "cmemory.h" | |
| #include "unewdata.h" | |
| #include "ucnv_cnv.h" | |
| #include "ucnvmbcs.h" | |
| #include "ucm.h" | |
| #include "makeconv.h" | |
| #include "genmbcs.h" | |
| #include "toolutil.h" | |
| /* | |
| * TODO: Split this file into toUnicode, SBCSFromUnicode and MBCSFromUnicode files. | |
| * Reduce tests for maxCharLength. | |
| */ | |
| struct MBCSData { | |
| NewConverter newConverter; | |
| UCMFile *ucm; | |
| /* toUnicode (state table in ucm->states) */ | |
| _MBCSToUFallback toUFallbacks[MBCS_MAX_FALLBACK_COUNT]; | |
| int32_t countToUFallbacks; | |
| uint16_t *unicodeCodeUnits; | |
| /* fromUnicode */ | |
| uint16_t stage1[MBCS_STAGE_1_SIZE]; | |
| uint16_t stage2Single[MBCS_STAGE_2_SIZE]; /* stage 2 for single-byte codepages */ | |
| uint32_t stage2[MBCS_STAGE_2_SIZE]; /* stage 2 for MBCS */ | |
| uint8_t *fromUBytes; | |
| uint32_t stage2Top, stage3Top; | |
| /* fromUTF8 */ | |
| uint16_t stageUTF8[0x10000>>MBCS_UTF8_STAGE_SHIFT]; /* allow for utf8Max=0xffff */ | |
| /* | |
| * Maximum UTF-8-friendly code point. | |
| * 0 if !utf8Friendly, otherwise 0x01ff..0xffff in steps of 0x100. | |
| * If utf8Friendly, utf8Max is normally either MBCS_UTF8_MAX or 0xffff. | |
| */ | |
| uint16_t utf8Max; | |
| UBool utf8Friendly; | |
| UBool omitFromU; | |
| }; | |
| /* prototypes */ | |
| U_CDECL_BEGIN | |
| static void | |
| MBCSClose(NewConverter *cnvData); | |
| static UBool | |
| MBCSStartMappings(MBCSData *mbcsData); | |
| static UBool | |
| MBCSAddToUnicode(MBCSData *mbcsData, | |
| const uint8_t *bytes, int32_t length, | |
| UChar32 c, | |
| int8_t flag); | |
| static UBool | |
| MBCSIsValid(NewConverter *cnvData, | |
| const uint8_t *bytes, int32_t length); | |
| static UBool | |
| MBCSSingleAddFromUnicode(MBCSData *mbcsData, | |
| const uint8_t *bytes, int32_t length, | |
| UChar32 c, | |
| int8_t flag); | |
| static UBool | |
| MBCSAddFromUnicode(MBCSData *mbcsData, | |
| const uint8_t *bytes, int32_t length, | |
| UChar32 c, | |
| int8_t flag); | |
| static void | |
| MBCSPostprocess(MBCSData *mbcsData, const UConverterStaticData *staticData); | |
| static UBool | |
| MBCSAddTable(NewConverter *cnvData, UCMTable *table, UConverterStaticData *staticData); | |
| static uint32_t | |
| MBCSWrite(NewConverter *cnvData, const UConverterStaticData *staticData, | |
| UNewDataMemory *pData, int32_t tableType); | |
| U_CDECL_END | |
| /* helper ------------------------------------------------------------------- */ | |
| static inline char | |
| hexDigit(uint8_t digit) { | |
| return digit<=9 ? (char)('0'+digit) : (char)('a'-10+digit); | |
| } | |
| static inline char * | |
| printBytes(char *buffer, const uint8_t *bytes, int32_t length) { | |
| char *s=buffer; | |
| while(length>0) { | |
| *s++=hexDigit((uint8_t)(*bytes>>4)); | |
| *s++=hexDigit((uint8_t)(*bytes&0xf)); | |
| ++bytes; | |
| --length; | |
| } | |
| *s=0; | |
| return buffer; | |
| } | |
| /* implementation ----------------------------------------------------------- */ | |
| static MBCSData gDummy; | |
| U_CFUNC const MBCSData * | |
| MBCSGetDummy() { | |
| uprv_memset(&gDummy, 0, sizeof(MBCSData)); | |
| /* | |
| * Set "pessimistic" values which may sometimes move too many | |
| * mappings to the extension table (but never too few). | |
| * These values cause MBCSOkForBaseFromUnicode() to return FALSE for the | |
| * largest set of mappings. | |
| * Assume maxCharLength>1. | |
| */ | |
| gDummy.utf8Friendly=TRUE; | |
| if(SMALL) { | |
| gDummy.utf8Max=0xffff; | |
| gDummy.omitFromU=TRUE; | |
| } else { | |
| gDummy.utf8Max=MBCS_UTF8_MAX; | |
| } | |
| return &gDummy; | |
| } | |
| static void | |
| MBCSInit(MBCSData *mbcsData, UCMFile *ucm) { | |
| uprv_memset(mbcsData, 0, sizeof(MBCSData)); | |
| mbcsData->ucm=ucm; /* aliased, not owned */ | |
| mbcsData->newConverter.close=MBCSClose; | |
| mbcsData->newConverter.isValid=MBCSIsValid; | |
| mbcsData->newConverter.addTable=MBCSAddTable; | |
| mbcsData->newConverter.write=MBCSWrite; | |
| } | |
| U_CFUNC NewConverter * | |
| MBCSOpen(UCMFile *ucm) { | |
| MBCSData *mbcsData=(MBCSData *)uprv_malloc(sizeof(MBCSData)); | |
| if(mbcsData==NULL) { | |
| printf("out of memory\n"); | |
| exit(U_MEMORY_ALLOCATION_ERROR); | |
| } | |
| MBCSInit(mbcsData, ucm); | |
| return &mbcsData->newConverter; | |
| } | |
| static void | |
| MBCSDestruct(MBCSData *mbcsData) { | |
| uprv_free(mbcsData->unicodeCodeUnits); | |
| uprv_free(mbcsData->fromUBytes); | |
| } | |
| U_CDECL_BEGIN | |
| static void | |
| MBCSClose(NewConverter *cnvData) { | |
| MBCSData *mbcsData=(MBCSData *)cnvData; | |
| if(mbcsData!=NULL) { | |
| MBCSDestruct(mbcsData); | |
| uprv_free(mbcsData); | |
| } | |
| } | |
| U_CDECL_END | |
| static UBool | |
| MBCSStartMappings(MBCSData *mbcsData) { | |
| int32_t i, sum, maxCharLength, | |
| stage2NullLength, stage2AllocLength, | |
| stage3NullLength, stage3AllocLength; | |
| /* toUnicode */ | |
| /* allocate the code unit array and prefill it with "unassigned" values */ | |
| sum=mbcsData->ucm->states.countToUCodeUnits; | |
| if(VERBOSE) { | |
| printf("the total number of offsets is 0x%lx=%ld\n", (long)sum, (long)sum); | |
| } | |
| if(sum>0) { | |
| mbcsData->unicodeCodeUnits=(uint16_t *)uprv_malloc(sum*sizeof(uint16_t)); | |
| if(mbcsData->unicodeCodeUnits==NULL) { | |
| fprintf(stderr, "error: out of memory allocating %ld 16-bit code units\n", | |
| (long)sum); | |
| return FALSE; | |
| } | |
| for(i=0; i<sum; ++i) { | |
| mbcsData->unicodeCodeUnits[i]=0xfffe; | |
| } | |
| } | |
| /* fromUnicode */ | |
| maxCharLength=mbcsData->ucm->states.maxCharLength; | |
| /* allocate the codepage mappings and preset the first 16 characters to 0 */ | |
| if(maxCharLength==1) { | |
| /* allocate 64k 16-bit results for single-byte codepages */ | |
| sum=0x20000; | |
| } else { | |
| /* allocate 1M * maxCharLength bytes for at most 1M mappings */ | |
| sum=0x100000*maxCharLength; | |
| } | |
| mbcsData->fromUBytes=(uint8_t *)uprv_malloc(sum); | |
| if(mbcsData->fromUBytes==NULL) { | |
| fprintf(stderr, "error: out of memory allocating %ld B for target mappings\n", (long)sum); | |
| return FALSE; | |
| } | |
| uprv_memset(mbcsData->fromUBytes, 0, sum); | |
| /* | |
| * UTF-8-friendly fromUnicode tries: allocate multiple blocks at a time. | |
| * See ucnvmbcs.h for details. | |
| * | |
| * There is code, for example in ucnv_MBCSGetUnicodeSetForUnicode(), which | |
| * assumes that the initial stage 2/3 blocks are the all-unassigned ones. | |
| * Therefore, we refine the data structure while maintaining this placement | |
| * even though it would be convenient to allocate the ASCII block at the | |
| * beginning of stage 3, for example. | |
| * | |
| * UTF-8-friendly fromUnicode tries work from sorted tables and are built | |
| * pre-compacted, overlapping adjacent stage 2/3 blocks. | |
| * This is necessary because the block allocation and compaction changes | |
| * at SBCS_UTF8_MAX or MBCS_UTF8_MAX, and for MBCS tables the additional | |
| * stage table uses direct indexes into stage 3, without a multiplier and | |
| * thus with a smaller reach. | |
| * | |
| * Non-UTF-8-friendly fromUnicode tries work from unsorted tables | |
| * (because implicit precision is used), and are compacted | |
| * in post-processing. | |
| * | |
| * Preallocation for UTF-8-friendly fromUnicode tries: | |
| * | |
| * Stage 3: | |
| * 64-entry all-unassigned first block followed by ASCII (128 entries). | |
| * | |
| * Stage 2: | |
| * 64-entry all-unassigned first block followed by preallocated | |
| * 64-block for ASCII. | |
| */ | |
| /* Preallocate ASCII as a linear 128-entry stage 3 block. */ | |
| stage2NullLength=MBCS_STAGE_2_BLOCK_SIZE; | |
| stage2AllocLength=MBCS_STAGE_2_BLOCK_SIZE; | |
| stage3NullLength=MBCS_UTF8_STAGE_3_BLOCK_SIZE; | |
| stage3AllocLength=128; /* ASCII U+0000..U+007f */ | |
| /* Initialize stage 1 for the preallocated blocks. */ | |
| sum=stage2NullLength; | |
| for(i=0; i<(stage2AllocLength>>MBCS_STAGE_2_BLOCK_SIZE_SHIFT); ++i) { | |
| mbcsData->stage1[i]=sum; | |
| sum+=MBCS_STAGE_2_BLOCK_SIZE; | |
| } | |
| mbcsData->stage2Top=stage2NullLength+stage2AllocLength; /* ==sum */ | |
| /* | |
| * Stage 2 indexes count 16-blocks in stage 3 as follows: | |
| * SBCS: directly, indexes increment by 16 | |
| * MBCS: indexes need to be multiplied by 16*maxCharLength, indexes increment by 1 | |
| * MBCS UTF-8: directly, indexes increment by 16 | |
| */ | |
| if(maxCharLength==1) { | |
| sum=stage3NullLength; | |
| for(i=0; i<(stage3AllocLength/MBCS_STAGE_3_BLOCK_SIZE); ++i) { | |
| mbcsData->stage2Single[mbcsData->stage1[0]+i]=sum; | |
| sum+=MBCS_STAGE_3_BLOCK_SIZE; | |
| } | |
| } else { | |
| sum=stage3NullLength/MBCS_STAGE_3_GRANULARITY; | |
| for(i=0; i<(stage3AllocLength/MBCS_STAGE_3_BLOCK_SIZE); ++i) { | |
| mbcsData->stage2[mbcsData->stage1[0]+i]=sum; | |
| sum+=MBCS_STAGE_3_BLOCK_SIZE/MBCS_STAGE_3_GRANULARITY; | |
| } | |
| } | |
| sum=stage3NullLength; | |
| for(i=0; i<(stage3AllocLength/MBCS_UTF8_STAGE_3_BLOCK_SIZE); ++i) { | |
| mbcsData->stageUTF8[i]=sum; | |
| sum+=MBCS_UTF8_STAGE_3_BLOCK_SIZE; | |
| } | |
| /* | |
| * Allocate a 64-entry all-unassigned first stage 3 block, | |
| * for UTF-8-friendly lookup with a trail byte, | |
| * plus 128 entries for ASCII. | |
| */ | |
| mbcsData->stage3Top=(stage3NullLength+stage3AllocLength)*maxCharLength; /* ==sum*maxCharLength */ | |
| return TRUE; | |
| } | |
| /* return TRUE for success */ | |
| static UBool | |
| setFallback(MBCSData *mbcsData, uint32_t offset, UChar32 c) { | |
| int32_t i=ucm_findFallback(mbcsData->toUFallbacks, mbcsData->countToUFallbacks, offset); | |
| if(i>=0) { | |
| /* if there is already a fallback for this offset, then overwrite it */ | |
| mbcsData->toUFallbacks[i].codePoint=c; | |
| return TRUE; | |
| } else { | |
| /* if there is no fallback for this offset, then add one */ | |
| i=mbcsData->countToUFallbacks; | |
| if(i>=MBCS_MAX_FALLBACK_COUNT) { | |
| fprintf(stderr, "error: too many toUnicode fallbacks, currently at: U+%x\n", (int)c); | |
| return FALSE; | |
| } else { | |
| mbcsData->toUFallbacks[i].offset=offset; | |
| mbcsData->toUFallbacks[i].codePoint=c; | |
| mbcsData->countToUFallbacks=i+1; | |
| return TRUE; | |
| } | |
| } | |
| } | |
| /* remove fallback if there is one with this offset; return the code point if there was such a fallback, otherwise -1 */ | |
| static int32_t | |
| removeFallback(MBCSData *mbcsData, uint32_t offset) { | |
| int32_t i=ucm_findFallback(mbcsData->toUFallbacks, mbcsData->countToUFallbacks, offset); | |
| if(i>=0) { | |
| _MBCSToUFallback *toUFallbacks; | |
| int32_t limit, old; | |
| toUFallbacks=mbcsData->toUFallbacks; | |
| limit=mbcsData->countToUFallbacks; | |
| old=(int32_t)toUFallbacks[i].codePoint; | |
| /* copy the last fallback entry here to keep the list contiguous */ | |
| toUFallbacks[i].offset=toUFallbacks[limit-1].offset; | |
| toUFallbacks[i].codePoint=toUFallbacks[limit-1].codePoint; | |
| mbcsData->countToUFallbacks=limit-1; | |
| return old; | |
| } else { | |
| return -1; | |
| } | |
| } | |
| /* | |
| * isFallback is almost a boolean: | |
| * 1 (TRUE) this is a fallback mapping | |
| * 0 (FALSE) this is a precise mapping | |
| * -1 the precision of this mapping is not specified | |
| */ | |
| static UBool | |
| MBCSAddToUnicode(MBCSData *mbcsData, | |
| const uint8_t *bytes, int32_t length, | |
| UChar32 c, | |
| int8_t flag) { | |
| char buffer[10]; | |
| uint32_t offset=0; | |
| int32_t i=0, entry, old; | |
| uint8_t state=0; | |
| if(mbcsData->ucm->states.countStates==0) { | |
| fprintf(stderr, "error: there is no state information!\n"); | |
| return FALSE; | |
| } | |
| /* for SI/SO (like EBCDIC-stateful), double-byte sequences start in state 1 */ | |
| if(length==2 && mbcsData->ucm->states.outputType==MBCS_OUTPUT_2_SISO) { | |
| state=1; | |
| } | |
| /* | |
| * Walk down the state table like in conversion, | |
| * much like getNextUChar(). | |
| * We assume that c<=0x10ffff. | |
| */ | |
| for(i=0;;) { | |
| entry=mbcsData->ucm->states.stateTable[state][bytes[i++]]; | |
| if(MBCS_ENTRY_IS_TRANSITION(entry)) { | |
| if(i==length) { | |
| fprintf(stderr, "error: byte sequence too short, ends in non-final state %hu: 0x%s (U+%x)\n", | |
| (short)state, printBytes(buffer, bytes, length), (int)c); | |
| return FALSE; | |
| } | |
| state=(uint8_t)MBCS_ENTRY_TRANSITION_STATE(entry); | |
| offset+=MBCS_ENTRY_TRANSITION_OFFSET(entry); | |
| } else { | |
| if(i<length) { | |
| fprintf(stderr, "error: byte sequence too long by %d bytes, final state %u: 0x%s (U+%x)\n", | |
| (int)(length-i), state, printBytes(buffer, bytes, length), (int)c); | |
| return FALSE; | |
| } | |
| switch(MBCS_ENTRY_FINAL_ACTION(entry)) { | |
| case MBCS_STATE_ILLEGAL: | |
| fprintf(stderr, "error: byte sequence ends in illegal state at U+%04x<->0x%s\n", | |
| (int)c, printBytes(buffer, bytes, length)); | |
| return FALSE; | |
| case MBCS_STATE_CHANGE_ONLY: | |
| fprintf(stderr, "error: byte sequence ends in state-change-only at U+%04x<->0x%s\n", | |
| (int)c, printBytes(buffer, bytes, length)); | |
| return FALSE; | |
| case MBCS_STATE_UNASSIGNED: | |
| fprintf(stderr, "error: byte sequence ends in unassigned state at U+%04x<->0x%s\n", | |
| (int)c, printBytes(buffer, bytes, length)); | |
| return FALSE; | |
| case MBCS_STATE_FALLBACK_DIRECT_16: | |
| case MBCS_STATE_VALID_DIRECT_16: | |
| case MBCS_STATE_FALLBACK_DIRECT_20: | |
| case MBCS_STATE_VALID_DIRECT_20: | |
| if(MBCS_ENTRY_SET_STATE(entry, 0)!=MBCS_ENTRY_FINAL(0, MBCS_STATE_VALID_DIRECT_16, 0xfffe)) { | |
| /* the "direct" action's value is not "valid-direct-16-unassigned" any more */ | |
| if(MBCS_ENTRY_FINAL_ACTION(entry)==MBCS_STATE_VALID_DIRECT_16 || MBCS_ENTRY_FINAL_ACTION(entry)==MBCS_STATE_FALLBACK_DIRECT_16) { | |
| old=MBCS_ENTRY_FINAL_VALUE(entry); | |
| } else { | |
| old=0x10000+MBCS_ENTRY_FINAL_VALUE(entry); | |
| } | |
| if(flag>=0) { | |
| fprintf(stderr, "error: duplicate codepage byte sequence at U+%04x<->0x%s see U+%04x\n", | |
| (int)c, printBytes(buffer, bytes, length), (int)old); | |
| return FALSE; | |
| } else if(VERBOSE) { | |
| fprintf(stderr, "duplicate codepage byte sequence at U+%04x<->0x%s see U+%04x\n", | |
| (int)c, printBytes(buffer, bytes, length), (int)old); | |
| } | |
| /* | |
| * Continue after the above warning | |
| * if the precision of the mapping is unspecified. | |
| */ | |
| } | |
| /* reassign the correct action code */ | |
| entry=MBCS_ENTRY_FINAL_SET_ACTION(entry, (MBCS_STATE_VALID_DIRECT_16+(flag==3 ? 2 : 0)+(c>=0x10000 ? 1 : 0))); | |
| /* put the code point into bits 22..7 for BMP, c-0x10000 into 26..7 for others */ | |
| if(c<=0xffff) { | |
| entry=MBCS_ENTRY_FINAL_SET_VALUE(entry, c); | |
| } else { | |
| entry=MBCS_ENTRY_FINAL_SET_VALUE(entry, c-0x10000); | |
| } | |
| mbcsData->ucm->states.stateTable[state][bytes[i-1]]=entry; | |
| break; | |
| case MBCS_STATE_VALID_16: | |
| /* bits 26..16 are not used, 0 */ | |
| /* bits 15..7 contain the final offset delta to one 16-bit code unit */ | |
| offset+=MBCS_ENTRY_FINAL_VALUE_16(entry); | |
| /* check that this byte sequence is still unassigned */ | |
| if((old=mbcsData->unicodeCodeUnits[offset])!=0xfffe || (old=removeFallback(mbcsData, offset))!=-1) { | |
| if(flag>=0) { | |
| fprintf(stderr, "error: duplicate codepage byte sequence at U+%04x<->0x%s see U+%04x\n", | |
| (int)c, printBytes(buffer, bytes, length), (int)old); | |
| return FALSE; | |
| } else if(VERBOSE) { | |
| fprintf(stderr, "duplicate codepage byte sequence at U+%04x<->0x%s see U+%04x\n", | |
| (int)c, printBytes(buffer, bytes, length), (int)old); | |
| } | |
| } | |
| if(c>=0x10000) { | |
| fprintf(stderr, "error: code point does not fit into valid-16-bit state at U+%04x<->0x%s\n", | |
| (int)c, printBytes(buffer, bytes, length)); | |
| return FALSE; | |
| } | |
| if(flag>0) { | |
| /* assign only if there is no precise mapping */ | |
| if(mbcsData->unicodeCodeUnits[offset]==0xfffe) { | |
| return setFallback(mbcsData, offset, c); | |
| } | |
| } else { | |
| mbcsData->unicodeCodeUnits[offset]=(uint16_t)c; | |
| } | |
| break; | |
| case MBCS_STATE_VALID_16_PAIR: | |
| /* bits 26..16 are not used, 0 */ | |
| /* bits 15..7 contain the final offset delta to two 16-bit code units */ | |
| offset+=MBCS_ENTRY_FINAL_VALUE_16(entry); | |
| /* check that this byte sequence is still unassigned */ | |
| old=mbcsData->unicodeCodeUnits[offset]; | |
| if(old<0xfffe) { | |
| int32_t real; | |
| if(old<0xd800) { | |
| real=old; | |
| } else if(old<=0xdfff) { | |
| real=0x10000+((old&0x3ff)<<10)+((mbcsData->unicodeCodeUnits[offset+1])&0x3ff); | |
| } else /* old<=0xe001 */ { | |
| real=mbcsData->unicodeCodeUnits[offset+1]; | |
| } | |
| if(flag>=0) { | |
| fprintf(stderr, "error: duplicate codepage byte sequence at U+%04x<->0x%s see U+%04x\n", | |
| (int)c, printBytes(buffer, bytes, length), (int)real); | |
| return FALSE; | |
| } else if(VERBOSE) { | |
| fprintf(stderr, "duplicate codepage byte sequence at U+%04x<->0x%s see U+%04x\n", | |
| (int)c, printBytes(buffer, bytes, length), (int)real); | |
| } | |
| } | |
| if(flag>0) { | |
| /* assign only if there is no precise mapping */ | |
| if(old<=0xdbff || old==0xe000) { | |
| /* do nothing */ | |
| } else if(c<=0xffff) { | |
| /* set a BMP fallback code point as a pair with 0xe001 */ | |
| mbcsData->unicodeCodeUnits[offset++]=0xe001; | |
| mbcsData->unicodeCodeUnits[offset]=(uint16_t)c; | |
| } else { | |
| /* set a fallback surrogate pair with two second surrogates */ | |
| mbcsData->unicodeCodeUnits[offset++]=(uint16_t)(0xdbc0+(c>>10)); | |
| mbcsData->unicodeCodeUnits[offset]=(uint16_t)(0xdc00+(c&0x3ff)); | |
| } | |
| } else { | |
| if(c<0xd800) { | |
| /* set a BMP code point */ | |
| mbcsData->unicodeCodeUnits[offset]=(uint16_t)c; | |
| } else if(c<=0xffff) { | |
| /* set a BMP code point above 0xd800 as a pair with 0xe000 */ | |
| mbcsData->unicodeCodeUnits[offset++]=0xe000; | |
| mbcsData->unicodeCodeUnits[offset]=(uint16_t)c; | |
| } else { | |
| /* set a surrogate pair */ | |
| mbcsData->unicodeCodeUnits[offset++]=(uint16_t)(0xd7c0+(c>>10)); | |
| mbcsData->unicodeCodeUnits[offset]=(uint16_t)(0xdc00+(c&0x3ff)); | |
| } | |
| } | |
| break; | |
| default: | |
| /* reserved, must never occur */ | |
| fprintf(stderr, "internal error: byte sequence reached reserved action code, entry 0x%02x: 0x%s (U+%x)\n", | |
| (int)entry, printBytes(buffer, bytes, length), (int)c); | |
| return FALSE; | |
| } | |
| return TRUE; | |
| } | |
| } | |
| } | |
| U_CDECL_BEGIN | |
| /* is this byte sequence valid? (this is almost the same as MBCSAddToUnicode()) */ | |
| static UBool | |
| MBCSIsValid(NewConverter *cnvData, | |
| const uint8_t *bytes, int32_t length) { | |
| MBCSData *mbcsData=(MBCSData *)cnvData; | |
| return (UBool)(1==ucm_countChars(&mbcsData->ucm->states, bytes, length)); | |
| } | |
| U_CDECL_END | |
| static UBool | |
| MBCSSingleAddFromUnicode(MBCSData *mbcsData, | |
| const uint8_t *bytes, int32_t /*length*/, | |
| UChar32 c, | |
| int8_t flag) { | |
| uint16_t *stage3, *p; | |
| uint32_t idx; | |
| uint16_t old; | |
| uint8_t b; | |
| uint32_t blockSize, newTop, i, nextOffset, newBlock, min; | |
| /* ignore |2 SUB mappings */ | |
| if(flag==2) { | |
| return TRUE; | |
| } | |
| /* | |
| * Walk down the triple-stage compact array ("trie") and | |
| * allocate parts as necessary. | |
| * Note that the first stage 2 and 3 blocks are reserved for all-unassigned mappings. | |
| * We assume that length<=maxCharLength and that c<=0x10ffff. | |
| */ | |
| stage3=(uint16_t *)mbcsData->fromUBytes; | |
| b=*bytes; | |
| /* inspect stage 1 */ | |
| idx=c>>MBCS_STAGE_1_SHIFT; | |
| if(mbcsData->utf8Friendly && c<=SBCS_UTF8_MAX) { | |
| nextOffset=(c>>MBCS_STAGE_2_SHIFT)&MBCS_STAGE_2_BLOCK_MASK&~(MBCS_UTF8_STAGE_3_BLOCKS-1); | |
| } else { | |
| nextOffset=(c>>MBCS_STAGE_2_SHIFT)&MBCS_STAGE_2_BLOCK_MASK; | |
| } | |
| if(mbcsData->stage1[idx]==MBCS_STAGE_2_ALL_UNASSIGNED_INDEX) { | |
| /* allocate another block in stage 2 */ | |
| newBlock=mbcsData->stage2Top; | |
| if(mbcsData->utf8Friendly) { | |
| min=newBlock-nextOffset; /* minimum block start with overlap */ | |
| while(min<newBlock && mbcsData->stage2Single[newBlock-1]==0) { | |
| --newBlock; | |
| } | |
| } | |
| newTop=newBlock+MBCS_STAGE_2_BLOCK_SIZE; | |
| if(newTop>MBCS_MAX_STAGE_2_TOP) { | |
| fprintf(stderr, "error: too many stage 2 entries at U+%04x<->0x%02x\n", (int)c, b); | |
| return FALSE; | |
| } | |
| /* | |
| * each stage 2 block contains 64 16-bit words: | |
| * 6 code point bits 9..4 with 1 stage 3 index | |
| */ | |
| mbcsData->stage1[idx]=(uint16_t)newBlock; | |
| mbcsData->stage2Top=newTop; | |
| } | |
| /* inspect stage 2 */ | |
| idx=mbcsData->stage1[idx]+nextOffset; | |
| if(mbcsData->utf8Friendly && c<=SBCS_UTF8_MAX) { | |
| /* allocate 64-entry blocks for UTF-8-friendly lookup */ | |
| blockSize=MBCS_UTF8_STAGE_3_BLOCK_SIZE; | |
| nextOffset=c&MBCS_UTF8_STAGE_3_BLOCK_MASK; | |
| } else { | |
| blockSize=MBCS_STAGE_3_BLOCK_SIZE; | |
| nextOffset=c&MBCS_STAGE_3_BLOCK_MASK; | |
| } | |
| if(mbcsData->stage2Single[idx]==0) { | |
| /* allocate another block in stage 3 */ | |
| newBlock=mbcsData->stage3Top; | |
| if(mbcsData->utf8Friendly) { | |
| min=newBlock-nextOffset; /* minimum block start with overlap */ | |
| while(min<newBlock && stage3[newBlock-1]==0) { | |
| --newBlock; | |
| } | |
| } | |
| newTop=newBlock+blockSize; | |
| if(newTop>MBCS_STAGE_3_SBCS_SIZE) { | |
| fprintf(stderr, "error: too many code points at U+%04x<->0x%02x\n", (int)c, b); | |
| return FALSE; | |
| } | |
| /* each block has 16 uint16_t entries */ | |
| i=idx; | |
| while(newBlock<newTop) { | |
| mbcsData->stage2Single[i++]=(uint16_t)newBlock; | |
| newBlock+=MBCS_STAGE_3_BLOCK_SIZE; | |
| } | |
| mbcsData->stage3Top=newTop; /* ==newBlock */ | |
| } | |
| /* write the codepage entry into stage 3 and get the previous entry */ | |
| p=stage3+mbcsData->stage2Single[idx]+nextOffset; | |
| old=*p; | |
| if(flag<=0) { | |
| *p=(uint16_t)(0xf00|b); | |
| } else if(IS_PRIVATE_USE(c)) { | |
| *p=(uint16_t)(0xc00|b); | |
| } else { | |
| *p=(uint16_t)(0x800|b); | |
| } | |
| /* check that this Unicode code point was still unassigned */ | |
| if(old>=0x100) { | |
| if(flag>=0) { | |
| fprintf(stderr, "error: duplicate Unicode code point at U+%04x<->0x%02x see 0x%02x\n", | |
| (int)c, b, old&0xff); | |
| return FALSE; | |
| } else if(VERBOSE) { | |
| fprintf(stderr, "duplicate Unicode code point at U+%04x<->0x%02x see 0x%02x\n", | |
| (int)c, b, old&0xff); | |
| } | |
| /* continue after the above warning if the precision of the mapping is unspecified */ | |
| } | |
| return TRUE; | |
| } | |
| static UBool | |
| MBCSAddFromUnicode(MBCSData *mbcsData, | |
| const uint8_t *bytes, int32_t length, | |
| UChar32 c, | |
| int8_t flag) { | |
| char buffer[10]; | |
| const uint8_t *pb; | |
| uint8_t *stage3, *p; | |
| uint32_t idx, b, old, stage3Index; | |
| int32_t maxCharLength; | |
| uint32_t blockSize, newTop, i, nextOffset, newBlock, min, overlap, maxOverlap; | |
| maxCharLength=mbcsData->ucm->states.maxCharLength; | |
| if( mbcsData->ucm->states.outputType==MBCS_OUTPUT_2_SISO && | |
| (!IGNORE_SISO_CHECK && (*bytes==0xe || *bytes==0xf)) | |
| ) { | |
| fprintf(stderr, "error: illegal mapping to SI or SO for SI/SO codepage: U+%04x<->0x%s\n", | |
| (int)c, printBytes(buffer, bytes, length)); | |
| return FALSE; | |
| } | |
| if(flag==1 && length==1 && *bytes==0) { | |
| fprintf(stderr, "error: unable to encode a |1 fallback from U+%04x to 0x%02x\n", | |
| (int)c, *bytes); | |
| return FALSE; | |
| } | |
| /* | |
| * Walk down the triple-stage compact array ("trie") and | |
| * allocate parts as necessary. | |
| * Note that the first stage 2 and 3 blocks are reserved for | |
| * all-unassigned mappings. | |
| * We assume that length<=maxCharLength and that c<=0x10ffff. | |
| */ | |
| stage3=mbcsData->fromUBytes; | |
| /* inspect stage 1 */ | |
| idx=c>>MBCS_STAGE_1_SHIFT; | |
| if(mbcsData->utf8Friendly && c<=mbcsData->utf8Max) { | |
| nextOffset=(c>>MBCS_STAGE_2_SHIFT)&MBCS_STAGE_2_BLOCK_MASK&~(MBCS_UTF8_STAGE_3_BLOCKS-1); | |
| } else { | |
| nextOffset=(c>>MBCS_STAGE_2_SHIFT)&MBCS_STAGE_2_BLOCK_MASK; | |
| } | |
| if(mbcsData->stage1[idx]==MBCS_STAGE_2_ALL_UNASSIGNED_INDEX) { | |
| /* allocate another block in stage 2 */ | |
| newBlock=mbcsData->stage2Top; | |
| if(mbcsData->utf8Friendly) { | |
| min=newBlock-nextOffset; /* minimum block start with overlap */ | |
| while(min<newBlock && mbcsData->stage2[newBlock-1]==0) { | |
| --newBlock; | |
| } | |
| } | |
| newTop=newBlock+MBCS_STAGE_2_BLOCK_SIZE; | |
| if(newTop>MBCS_MAX_STAGE_2_TOP) { | |
| fprintf(stderr, "error: too many stage 2 entries at U+%04x<->0x%s\n", | |
| (int)c, printBytes(buffer, bytes, length)); | |
| return FALSE; | |
| } | |
| /* | |
| * each stage 2 block contains 64 32-bit words: | |
| * 6 code point bits 9..4 with value with bits 31..16 "assigned" flags and bits 15..0 stage 3 index | |
| */ | |
| i=idx; | |
| while(newBlock<newTop) { | |
| mbcsData->stage1[i++]=(uint16_t)newBlock; | |
| newBlock+=MBCS_STAGE_2_BLOCK_SIZE; | |
| } | |
| mbcsData->stage2Top=newTop; /* ==newBlock */ | |
| } | |
| /* inspect stage 2 */ | |
| idx=mbcsData->stage1[idx]+nextOffset; | |
| if(mbcsData->utf8Friendly && c<=mbcsData->utf8Max) { | |
| /* allocate 64-entry blocks for UTF-8-friendly lookup */ | |
| blockSize=MBCS_UTF8_STAGE_3_BLOCK_SIZE*maxCharLength; | |
| nextOffset=c&MBCS_UTF8_STAGE_3_BLOCK_MASK; | |
| } else { | |
| blockSize=MBCS_STAGE_3_BLOCK_SIZE*maxCharLength; | |
| nextOffset=c&MBCS_STAGE_3_BLOCK_MASK; | |
| } | |
| if(mbcsData->stage2[idx]==0) { | |
| /* allocate another block in stage 3 */ | |
| newBlock=mbcsData->stage3Top; | |
| if(mbcsData->utf8Friendly && nextOffset>=MBCS_STAGE_3_GRANULARITY) { | |
| /* | |
| * Overlap stage 3 blocks only in multiples of 16-entry blocks | |
| * because of the indexing granularity in stage 2. | |
| */ | |
| maxOverlap=(nextOffset&~(MBCS_STAGE_3_GRANULARITY-1))*maxCharLength; | |
| for(overlap=0; | |
| overlap<maxOverlap && stage3[newBlock-overlap-1]==0; | |
| ++overlap) {} | |
| overlap=(overlap/MBCS_STAGE_3_GRANULARITY)/maxCharLength; | |
| overlap=(overlap*MBCS_STAGE_3_GRANULARITY)*maxCharLength; | |
| newBlock-=overlap; | |
| } | |
| newTop=newBlock+blockSize; | |
| if(newTop>MBCS_STAGE_3_MBCS_SIZE*(uint32_t)maxCharLength) { | |
| fprintf(stderr, "error: too many code points at U+%04x<->0x%s\n", | |
| (int)c, printBytes(buffer, bytes, length)); | |
| return FALSE; | |
| } | |
| /* each block has 16*maxCharLength bytes */ | |
| i=idx; | |
| while(newBlock<newTop) { | |
| mbcsData->stage2[i++]=(newBlock/MBCS_STAGE_3_GRANULARITY)/maxCharLength; | |
| newBlock+=MBCS_STAGE_3_BLOCK_SIZE*maxCharLength; | |
| } | |
| mbcsData->stage3Top=newTop; /* ==newBlock */ | |
| } | |
| stage3Index=MBCS_STAGE_3_GRANULARITY*(uint32_t)(uint16_t)mbcsData->stage2[idx]; | |
| /* Build an alternate, UTF-8-friendly stage table as well. */ | |
| if(mbcsData->utf8Friendly && c<=mbcsData->utf8Max) { | |
| /* Overflow for uint16_t entries in stageUTF8? */ | |
| if(stage3Index>0xffff) { | |
| /* | |
| * This can occur only if the mapping table is nearly perfectly filled and if | |
| * utf8Max==0xffff. | |
| * (There is no known charset like this. GB 18030 does not map | |
| * surrogate code points and LMBCS does not map 256 PUA code points.) | |
| * | |
| * Otherwise, stage3Index<=MBCS_UTF8_LIMIT<0xffff | |
| * (stage3Index can at most reach exactly MBCS_UTF8_LIMIT) | |
| * because we have a sorted table and there are at most MBCS_UTF8_LIMIT | |
| * mappings with 0<=c<MBCS_UTF8_LIMIT, and there is only also | |
| * the initial all-unassigned block in stage3. | |
| * | |
| * Solution for the overflow: Reduce utf8Max to the next lower value, 0xfeff. | |
| * | |
| * (See svn revision 20866 of the markus/ucnvutf8 feature branch for | |
| * code that causes MBCSAddTable() to rebuild the table not utf8Friendly | |
| * in case of overflow. That code was not tested.) | |
| */ | |
| mbcsData->utf8Max=0xfeff; | |
| } else { | |
| /* | |
| * The stage 3 block has been assigned for the regular trie. | |
| * Just copy its index into stageUTF8[], without the granularity. | |
| */ | |
| mbcsData->stageUTF8[c>>MBCS_UTF8_STAGE_SHIFT]=(uint16_t)stage3Index; | |
| } | |
| } | |
| /* write the codepage bytes into stage 3 and get the previous bytes */ | |
| /* assemble the bytes into a single integer */ | |
| pb=bytes; | |
| b=0; | |
| switch(length) { | |
| case 4: | |
| b=*pb++; | |
| U_FALLTHROUGH; | |
| case 3: | |
| b=(b<<8)|*pb++; | |
| U_FALLTHROUGH; | |
| case 2: | |
| b=(b<<8)|*pb++; | |
| U_FALLTHROUGH; | |
| case 1: | |
| default: | |
| b=(b<<8)|*pb++; | |
| break; | |
| } | |
| old=0; | |
| p=stage3+(stage3Index+nextOffset)*maxCharLength; | |
| switch(maxCharLength) { | |
| case 2: | |
| old=*(uint16_t *)p; | |
| *(uint16_t *)p=(uint16_t)b; | |
| break; | |
| case 3: | |
| old=(uint32_t)*p<<16; | |
| *p++=(uint8_t)(b>>16); | |
| old|=(uint32_t)*p<<8; | |
| *p++=(uint8_t)(b>>8); | |
| old|=*p; | |
| *p=(uint8_t)b; | |
| break; | |
| case 4: | |
| old=*(uint32_t *)p; | |
| *(uint32_t *)p=b; | |
| break; | |
| default: | |
| /* will never occur */ | |
| break; | |
| } | |
| /* check that this Unicode code point was still unassigned */ | |
| if((mbcsData->stage2[idx+(nextOffset>>MBCS_STAGE_2_SHIFT)]&(1UL<<(16+(c&0xf))))!=0 || old!=0) { | |
| if(flag>=0) { | |
| fprintf(stderr, "error: duplicate Unicode code point at U+%04x<->0x%s see 0x%02x\n", | |
| (int)c, printBytes(buffer, bytes, length), (int)old); | |
| return FALSE; | |
| } else if(VERBOSE) { | |
| fprintf(stderr, "duplicate Unicode code point at U+%04x<->0x%s see 0x%02x\n", | |
| (int)c, printBytes(buffer, bytes, length), (int)old); | |
| } | |
| /* continue after the above warning if the precision of the mapping is | |
| unspecified */ | |
| } | |
| if(flag<=0) { | |
| /* set the roundtrip flag */ | |
| mbcsData->stage2[idx+(nextOffset>>4)]|=(1UL<<(16+(c&0xf))); | |
| } | |
| return TRUE; | |
| } | |
| U_CFUNC UBool | |
| MBCSOkForBaseFromUnicode(const MBCSData *mbcsData, | |
| const uint8_t *bytes, int32_t length, | |
| UChar32 c, int8_t flag) { | |
| /* | |
| * A 1:1 mapping does not fit into the MBCS base table's fromUnicode table under | |
| * the following conditions: | |
| * | |
| * - a |2 SUB mapping for <subchar1> (no base table data structure for them) | |
| * - a |1 fallback to 0x00 (result value 0, indistinguishable from unmappable entry) | |
| * - a multi-byte mapping with leading 0x00 bytes (no explicit length field) | |
| * | |
| * Some of these tests are redundant with ucm_mappingType(). | |
| */ | |
| if( (flag==2 && length==1) || | |
| (flag==1 && bytes[0]==0) || /* testing length==1 would be redundant with the next test */ | |
| (flag<=1 && length>1 && bytes[0]==0) | |
| ) { | |
| return FALSE; | |
| } | |
| /* | |
| * Additional restrictions for UTF-8-friendly fromUnicode tables, | |
| * for code points up to the maximum optimized one: | |
| * | |
| * - any mapping to 0x00 (result value 0, indistinguishable from unmappable entry) | |
| * - any |1 fallback (no roundtrip flags in the optimized table) | |
| */ | |
| if(mbcsData->utf8Friendly && flag<=1 && c<=mbcsData->utf8Max && (bytes[0]==0 || flag==1)) { | |
| return FALSE; | |
| } | |
| /* | |
| * If we omit the fromUnicode data, we can only store roundtrips there | |
| * because only they are recoverable from the toUnicode data. | |
| * Fallbacks must go into the extension table. | |
| */ | |
| if(mbcsData->omitFromU && flag!=0) { | |
| return FALSE; | |
| } | |
| /* All other mappings do fit into the base table. */ | |
| return TRUE; | |
| } | |
| U_CDECL_BEGIN | |
| /* we can assume that the table only contains 1:1 mappings with <=4 bytes each */ | |
| static UBool | |
| MBCSAddTable(NewConverter *cnvData, UCMTable *table, UConverterStaticData *staticData) { | |
| MBCSData *mbcsData; | |
| UCMapping *m; | |
| UChar32 c; | |
| int32_t i, maxCharLength; | |
| int8_t f; | |
| UBool isOK, utf8Friendly; | |
| staticData->unicodeMask=table->unicodeMask; | |
| if(staticData->unicodeMask==3) { | |
| fprintf(stderr, "error: contains mappings for both supplementary and surrogate code points\n"); | |
| return FALSE; | |
| } | |
| staticData->conversionType=UCNV_MBCS; | |
| mbcsData=(MBCSData *)cnvData; | |
| maxCharLength=mbcsData->ucm->states.maxCharLength; | |
| /* | |
| * Generation of UTF-8-friendly data requires | |
| * a sorted table, which makeconv generates when explicit precision | |
| * indicators are used. | |
| */ | |
| mbcsData->utf8Friendly=utf8Friendly=(UBool)((table->flagsType&UCM_FLAGS_EXPLICIT)!=0); | |
| if(utf8Friendly) { | |
| mbcsData->utf8Max=MBCS_UTF8_MAX; | |
| if(SMALL && maxCharLength>1) { | |
| mbcsData->omitFromU=TRUE; | |
| } | |
| } else { | |
| mbcsData->utf8Max=0; | |
| if(SMALL && maxCharLength>1) { | |
| fprintf(stderr, | |
| "makeconv warning: --small not available for .ucm files without |0 etc.\n"); | |
| } | |
| } | |
| if(!MBCSStartMappings(mbcsData)) { | |
| return FALSE; | |
| } | |
| staticData->hasFromUnicodeFallback=FALSE; | |
| staticData->hasToUnicodeFallback=FALSE; | |
| isOK=TRUE; | |
| m=table->mappings; | |
| for(i=0; i<table->mappingsLength; ++m, ++i) { | |
| c=m->u; | |
| f=m->f; | |
| /* | |
| * Small optimization for --small .cnv files: | |
| * | |
| * If there are fromUnicode mappings above MBCS_UTF8_MAX, | |
| * then the file size will be smaller if we make utf8Max larger | |
| * because the size increase in stageUTF8 will be more than balanced by | |
| * how much less of stage2 needs to be stored. | |
| * | |
| * There is no point in doing this incrementally because stageUTF8 | |
| * uses so much less space per block than stage2, | |
| * so we immediately increase utf8Max to 0xffff. | |
| * | |
| * Do not increase utf8Max if it is already at 0xfeff because MBCSAddFromUnicode() | |
| * sets it to that value when stageUTF8 overflows. | |
| */ | |
| if( mbcsData->omitFromU && f<=1 && | |
| mbcsData->utf8Max<c && c<=0xffff && | |
| mbcsData->utf8Max<0xfeff | |
| ) { | |
| mbcsData->utf8Max=0xffff; | |
| } | |
| switch(f) { | |
| case -1: | |
| /* there was no precision/fallback indicator */ | |
| /* fall through to set the mappings */ | |
| U_FALLTHROUGH; | |
| case 0: | |
| /* set roundtrip mappings */ | |
| isOK&=MBCSAddToUnicode(mbcsData, m->b.bytes, m->bLen, c, f); | |
| if(maxCharLength==1) { | |
| isOK&=MBCSSingleAddFromUnicode(mbcsData, m->b.bytes, m->bLen, c, f); | |
| } else if(MBCSOkForBaseFromUnicode(mbcsData, m->b.bytes, m->bLen, c, f)) { | |
| isOK&=MBCSAddFromUnicode(mbcsData, m->b.bytes, m->bLen, c, f); | |
| } else { | |
| m->f|=MBCS_FROM_U_EXT_FLAG; | |
| m->moveFlag=UCM_MOVE_TO_EXT; | |
| } | |
| break; | |
| case 1: | |
| /* set only a fallback mapping from Unicode to codepage */ | |
| if(maxCharLength==1) { | |
| staticData->hasFromUnicodeFallback=TRUE; | |
| isOK&=MBCSSingleAddFromUnicode(mbcsData, m->b.bytes, m->bLen, c, f); | |
| } else if(MBCSOkForBaseFromUnicode(mbcsData, m->b.bytes, m->bLen, c, f)) { | |
| staticData->hasFromUnicodeFallback=TRUE; | |
| isOK&=MBCSAddFromUnicode(mbcsData, m->b.bytes, m->bLen, c, f); | |
| } else { | |
| m->f|=MBCS_FROM_U_EXT_FLAG; | |
| m->moveFlag=UCM_MOVE_TO_EXT; | |
| } | |
| break; | |
| case 2: | |
| /* ignore |2 SUB mappings, except to move <subchar1> mappings to the extension table */ | |
| if(maxCharLength>1 && m->bLen==1) { | |
| m->f|=MBCS_FROM_U_EXT_FLAG; | |
| m->moveFlag=UCM_MOVE_TO_EXT; | |
| } | |
| break; | |
| case 3: | |
| /* set only a fallback mapping from codepage to Unicode */ | |
| staticData->hasToUnicodeFallback=TRUE; | |
| isOK&=MBCSAddToUnicode(mbcsData, m->b.bytes, m->bLen, c, f); | |
| break; | |
| case 4: | |
| /* move "good one-way" mappings to the extension table */ | |
| m->f|=MBCS_FROM_U_EXT_FLAG; | |
| m->moveFlag=UCM_MOVE_TO_EXT; | |
| break; | |
| default: | |
| /* will not occur because the parser checked it already */ | |
| fprintf(stderr, "error: illegal fallback indicator %d\n", f); | |
| return FALSE; | |
| } | |
| } | |
| MBCSPostprocess(mbcsData, staticData); | |
| return isOK; | |
| } | |
| U_CDECL_END | |
| static UBool | |
| transformEUC(MBCSData *mbcsData) { | |
| uint8_t *p8; | |
| uint32_t i, value, oldLength, old3Top; | |
| uint8_t b; | |
| oldLength=mbcsData->ucm->states.maxCharLength; | |
| if(oldLength<3) { | |
| return FALSE; | |
| } | |
| old3Top=mbcsData->stage3Top; | |
| /* careful: 2-byte and 4-byte codes are stored in platform endianness! */ | |
| /* test if all first bytes are in {0, 0x8e, 0x8f} */ | |
| p8=mbcsData->fromUBytes; | |
| #if !U_IS_BIG_ENDIAN | |
| if(oldLength==4) { | |
| p8+=3; | |
| } | |
| #endif | |
| for(i=0; i<old3Top; i+=oldLength) { | |
| b=p8[i]; | |
| if(b!=0 && b!=0x8e && b!=0x8f) { | |
| /* some first byte does not fit the EUC pattern, nothing to be done */ | |
| return FALSE; | |
| } | |
| } | |
| /* restore p if it was modified above */ | |
| p8=mbcsData->fromUBytes; | |
| /* modify outputType and adjust stage3Top */ | |
| mbcsData->ucm->states.outputType=(int8_t)(MBCS_OUTPUT_3_EUC+oldLength-3); | |
| mbcsData->stage3Top=(old3Top*(oldLength-1))/oldLength; | |
| /* | |
| * EUC-encode all byte sequences; | |
| * see "CJKV Information Processing" (1st ed. 1999) from Ken Lunde, O'Reilly, | |
| * p. 161 in chapter 4 "Encoding Methods" | |
| * | |
| * This also must reverse the byte order if the platform is little-endian! | |
| */ | |
| if(oldLength==3) { | |
| uint16_t *q=(uint16_t *)p8; | |
| for(i=0; i<old3Top; i+=oldLength) { | |
| b=*p8; | |
| if(b==0) { | |
| /* short sequences are stored directly */ | |
| /* code set 0 or 1 */ | |
| (*q++)=(uint16_t)((p8[1]<<8)|p8[2]); | |
| } else if(b==0x8e) { | |
| /* code set 2 */ | |
| (*q++)=(uint16_t)(((p8[1]&0x7f)<<8)|p8[2]); | |
| } else /* b==0x8f */ { | |
| /* code set 3 */ | |
| (*q++)=(uint16_t)((p8[1]<<8)|(p8[2]&0x7f)); | |
| } | |
| p8+=3; | |
| } | |
| } else /* oldLength==4 */ { | |
| uint8_t *q=p8; | |
| uint32_t *p32=(uint32_t *)p8; | |
| for(i=0; i<old3Top; i+=4) { | |
| value=(*p32++); | |
| if(value<=0xffffff) { | |
| /* short sequences are stored directly */ | |
| /* code set 0 or 1 */ | |
| (*q++)=(uint8_t)(value>>16); | |
| (*q++)=(uint8_t)(value>>8); | |
| (*q++)=(uint8_t)value; | |
| } else if(value<=0x8effffff) { | |
| /* code set 2 */ | |
| (*q++)=(uint8_t)((value>>16)&0x7f); | |
| (*q++)=(uint8_t)(value>>8); | |
| (*q++)=(uint8_t)value; | |
| } else /* first byte is 0x8f */ { | |
| /* code set 3 */ | |
| (*q++)=(uint8_t)(value>>16); | |
| (*q++)=(uint8_t)((value>>8)&0x7f); | |
| (*q++)=(uint8_t)value; | |
| } | |
| } | |
| } | |
| return TRUE; | |
| } | |
| /* | |
| * Compact stage 2 for SBCS by overlapping adjacent stage 2 blocks as far | |
| * as possible. Overlapping is done on unassigned head and tail | |
| * parts of blocks in steps of MBCS_STAGE_2_MULTIPLIER. | |
| * Stage 1 indexes need to be adjusted accordingly. | |
| * This function is very similar to genprops/store.c/compactStage(). | |
| */ | |
| static void | |
| singleCompactStage2(MBCSData *mbcsData) { | |
| /* this array maps the ordinal number of a stage 2 block to its new stage 1 index */ | |
| uint16_t map[MBCS_STAGE_2_MAX_BLOCKS]; | |
| uint16_t i, start, prevEnd, newStart; | |
| /* enter the all-unassigned first stage 2 block into the map */ | |
| map[0]=MBCS_STAGE_2_ALL_UNASSIGNED_INDEX; | |
| /* begin with the first block after the all-unassigned one */ | |
| start=newStart=MBCS_STAGE_2_FIRST_ASSIGNED; | |
| while(start<mbcsData->stage2Top) { | |
| prevEnd=(uint16_t)(newStart-1); | |
| /* find the size of the overlap */ | |
| for(i=0; i<MBCS_STAGE_2_BLOCK_SIZE && mbcsData->stage2Single[start+i]==0 && mbcsData->stage2Single[prevEnd-i]==0; ++i) {} | |
| if(i>0) { | |
| map[start>>MBCS_STAGE_2_BLOCK_SIZE_SHIFT]=(uint16_t)(newStart-i); | |
| /* move the non-overlapping indexes to their new positions */ | |
| start+=i; | |
| for(i=(uint16_t)(MBCS_STAGE_2_BLOCK_SIZE-i); i>0; --i) { | |
| mbcsData->stage2Single[newStart++]=mbcsData->stage2Single[start++]; | |
| } | |
| } else if(newStart<start) { | |
| /* move the indexes to their new positions */ | |
| map[start>>MBCS_STAGE_2_BLOCK_SIZE_SHIFT]=newStart; | |
| for(i=MBCS_STAGE_2_BLOCK_SIZE; i>0; --i) { | |
| mbcsData->stage2Single[newStart++]=mbcsData->stage2Single[start++]; | |
| } | |
| } else /* no overlap && newStart==start */ { | |
| map[start>>MBCS_STAGE_2_BLOCK_SIZE_SHIFT]=start; | |
| start=newStart+=MBCS_STAGE_2_BLOCK_SIZE; | |
| } | |
| } | |
| /* adjust stage2Top */ | |
| if(VERBOSE && newStart<mbcsData->stage2Top) { | |
| printf("compacting stage 2 from stage2Top=0x%lx to 0x%lx, saving %ld bytes\n", | |
| (unsigned long)mbcsData->stage2Top, (unsigned long)newStart, | |
| (long)(mbcsData->stage2Top-newStart)*2); | |
| } | |
| mbcsData->stage2Top=newStart; | |
| /* now adjust stage 1 */ | |
| for(i=0; i<MBCS_STAGE_1_SIZE; ++i) { | |
| mbcsData->stage1[i]=map[mbcsData->stage1[i]>>MBCS_STAGE_2_BLOCK_SIZE_SHIFT]; | |
| } | |
| } | |
| /* Compact stage 3 for SBCS - same algorithm as above. */ | |
| static void | |
| singleCompactStage3(MBCSData *mbcsData) { | |
| uint16_t *stage3=(uint16_t *)mbcsData->fromUBytes; | |
| /* this array maps the ordinal number of a stage 3 block to its new stage 2 index */ | |
| uint16_t map[0x1000]; | |
| uint16_t i, start, prevEnd, newStart; | |
| /* enter the all-unassigned first stage 3 block into the map */ | |
| map[0]=0; | |
| /* begin with the first block after the all-unassigned one */ | |
| start=newStart=16; | |
| while(start<mbcsData->stage3Top) { | |
| prevEnd=(uint16_t)(newStart-1); | |
| /* find the size of the overlap */ | |
| for(i=0; i<16 && stage3[start+i]==0 && stage3[prevEnd-i]==0; ++i) {} | |
| if(i>0) { | |
| map[start>>4]=(uint16_t)(newStart-i); | |
| /* move the non-overlapping indexes to their new positions */ | |
| start+=i; | |
| for(i=(uint16_t)(16-i); i>0; --i) { | |
| stage3[newStart++]=stage3[start++]; | |
| } | |
| } else if(newStart<start) { | |
| /* move the indexes to their new positions */ | |
| map[start>>4]=newStart; | |
| for(i=16; i>0; --i) { | |
| stage3[newStart++]=stage3[start++]; | |
| } | |
| } else /* no overlap && newStart==start */ { | |
| map[start>>4]=start; | |
| start=newStart+=16; | |
| } | |
| } | |
| /* adjust stage3Top */ | |
| if(VERBOSE && newStart<mbcsData->stage3Top) { | |
| printf("compacting stage 3 from stage3Top=0x%lx to 0x%lx, saving %ld bytes\n", | |
| (unsigned long)mbcsData->stage3Top, (unsigned long)newStart, | |
| (long)(mbcsData->stage3Top-newStart)*2); | |
| } | |
| mbcsData->stage3Top=newStart; | |
| /* now adjust stage 2 */ | |
| for(i=0; i<mbcsData->stage2Top; ++i) { | |
| mbcsData->stage2Single[i]=map[mbcsData->stage2Single[i]>>4]; | |
| } | |
| } | |
| /* | |
| * Compact stage 2 by overlapping adjacent stage 2 blocks as far | |
| * as possible. Overlapping is done on unassigned head and tail | |
| * parts of blocks in steps of MBCS_STAGE_2_MULTIPLIER. | |
| * Stage 1 indexes need to be adjusted accordingly. | |
| * This function is very similar to genprops/store.c/compactStage(). | |
| */ | |
| static void | |
| compactStage2(MBCSData *mbcsData) { | |
| /* this array maps the ordinal number of a stage 2 block to its new stage 1 index */ | |
| uint16_t map[MBCS_STAGE_2_MAX_BLOCKS]; | |
| uint16_t i, start, prevEnd, newStart; | |
| /* enter the all-unassigned first stage 2 block into the map */ | |
| map[0]=MBCS_STAGE_2_ALL_UNASSIGNED_INDEX; | |
| /* begin with the first block after the all-unassigned one */ | |
| start=newStart=MBCS_STAGE_2_FIRST_ASSIGNED; | |
| while(start<mbcsData->stage2Top) { | |
| prevEnd=(uint16_t)(newStart-1); | |
| /* find the size of the overlap */ | |
| for(i=0; i<MBCS_STAGE_2_BLOCK_SIZE && mbcsData->stage2[start+i]==0 && mbcsData->stage2[prevEnd-i]==0; ++i) {} | |
| if(i>0) { | |
| map[start>>MBCS_STAGE_2_BLOCK_SIZE_SHIFT]=(uint16_t)(newStart-i); | |
| /* move the non-overlapping indexes to their new positions */ | |
| start+=i; | |
| for(i=(uint16_t)(MBCS_STAGE_2_BLOCK_SIZE-i); i>0; --i) { | |
| mbcsData->stage2[newStart++]=mbcsData->stage2[start++]; | |
| } | |
| } else if(newStart<start) { | |
| /* move the indexes to their new positions */ | |
| map[start>>MBCS_STAGE_2_BLOCK_SIZE_SHIFT]=newStart; | |
| for(i=MBCS_STAGE_2_BLOCK_SIZE; i>0; --i) { | |
| mbcsData->stage2[newStart++]=mbcsData->stage2[start++]; | |
| } | |
| } else /* no overlap && newStart==start */ { | |
| map[start>>MBCS_STAGE_2_BLOCK_SIZE_SHIFT]=start; | |
| start=newStart+=MBCS_STAGE_2_BLOCK_SIZE; | |
| } | |
| } | |
| /* adjust stage2Top */ | |
| if(VERBOSE && newStart<mbcsData->stage2Top) { | |
| printf("compacting stage 2 from stage2Top=0x%lx to 0x%lx, saving %ld bytes\n", | |
| (unsigned long)mbcsData->stage2Top, (unsigned long)newStart, | |
| (long)(mbcsData->stage2Top-newStart)*4); | |
| } | |
| mbcsData->stage2Top=newStart; | |
| /* now adjust stage 1 */ | |
| for(i=0; i<MBCS_STAGE_1_SIZE; ++i) { | |
| mbcsData->stage1[i]=map[mbcsData->stage1[i]>>MBCS_STAGE_2_BLOCK_SIZE_SHIFT]; | |
| } | |
| } | |
| static void | |
| MBCSPostprocess(MBCSData *mbcsData, const UConverterStaticData * /*staticData*/) { | |
| UCMStates *states; | |
| int32_t maxCharLength, stage3Width; | |
| states=&mbcsData->ucm->states; | |
| stage3Width=maxCharLength=states->maxCharLength; | |
| ucm_optimizeStates(states, | |
| &mbcsData->unicodeCodeUnits, | |
| mbcsData->toUFallbacks, mbcsData->countToUFallbacks, | |
| VERBOSE); | |
| /* try to compact the fromUnicode tables */ | |
| if(transformEUC(mbcsData)) { | |
| --stage3Width; | |
| } | |
| /* | |
| * UTF-8-friendly tries are built precompacted, to cope with variable | |
| * stage 3 allocation block sizes. | |
| * | |
| * Tables without precision indicators cannot be built that way, | |
| * because if a block was overlapped with a previous one, then a smaller | |
| * code point for the same block would not fit. | |
| * Therefore, such tables are not marked UTF-8-friendly and must be | |
| * compacted after all mappings are entered. | |
| */ | |
| if(!mbcsData->utf8Friendly) { | |
| if(maxCharLength==1) { | |
| singleCompactStage3(mbcsData); | |
| singleCompactStage2(mbcsData); | |
| } else { | |
| compactStage2(mbcsData); | |
| } | |
| } | |
| if(VERBOSE) { | |
| /*uint32_t c, i1, i2, i2Limit, i3;*/ | |
| printf("fromUnicode number of uint%s_t in stage 2: 0x%lx=%lu\n", | |
| maxCharLength==1 ? "16" : "32", | |
| (unsigned long)mbcsData->stage2Top, | |
| (unsigned long)mbcsData->stage2Top); | |
| printf("fromUnicode number of %d-byte stage 3 mapping entries: 0x%lx=%lu\n", | |
| (int)stage3Width, | |
| (unsigned long)mbcsData->stage3Top/stage3Width, | |
| (unsigned long)mbcsData->stage3Top/stage3Width); | |
| #if 0 | |
| c=0; | |
| for(i1=0; i1<MBCS_STAGE_1_SIZE; ++i1) { | |
| i2=mbcsData->stage1[i1]; | |
| if(i2==0) { | |
| c+=MBCS_STAGE_2_BLOCK_SIZE*MBCS_STAGE_3_BLOCK_SIZE; | |
| continue; | |
| } | |
| for(i2Limit=i2+MBCS_STAGE_2_BLOCK_SIZE; i2<i2Limit; ++i2) { | |
| if(maxCharLength==1) { | |
| i3=mbcsData->stage2Single[i2]; | |
| } else { | |
| i3=(uint16_t)mbcsData->stage2[i2]; | |
| } | |
| if(i3==0) { | |
| c+=MBCS_STAGE_3_BLOCK_SIZE; | |
| continue; | |
| } | |
| printf("U+%04lx i1=0x%02lx i2=0x%04lx i3=0x%04lx\n", | |
| (unsigned long)c, | |
| (unsigned long)i1, | |
| (unsigned long)i2, | |
| (unsigned long)i3); | |
| c+=MBCS_STAGE_3_BLOCK_SIZE; | |
| } | |
| } | |
| #endif | |
| } | |
| } | |
| U_CDECL_BEGIN | |
| static uint32_t | |
| MBCSWrite(NewConverter *cnvData, const UConverterStaticData *staticData, | |
| UNewDataMemory *pData, int32_t tableType) { | |
| MBCSData *mbcsData=(MBCSData *)cnvData; | |
| uint32_t stage2Start, stage2Length; | |
| uint32_t top, stageUTF8Length=0; | |
| int32_t i, stage1Top; | |
| uint32_t headerLength; | |
| _MBCSHeader header=UCNV_MBCS_HEADER_INITIALIZER; | |
| stage2Length=mbcsData->stage2Top; | |
| if(mbcsData->omitFromU) { | |
| /* find how much of stage2 can be omitted */ | |
| int32_t utf8Limit=(int32_t)mbcsData->utf8Max+1; | |
| uint32_t st2=0; /*initialized it to avoid compiler warnings */ | |
| i=utf8Limit>>MBCS_STAGE_1_SHIFT; | |
| if((utf8Limit&((1<<MBCS_STAGE_1_SHIFT)-1))!=0 && (st2=mbcsData->stage1[i])!=0) { | |
| /* utf8Limit is in the middle of an existing stage 2 block */ | |
| stage2Start=st2+((utf8Limit>>MBCS_STAGE_2_SHIFT)&MBCS_STAGE_2_BLOCK_MASK); | |
| } else { | |
| /* find the last stage2 block with mappings before utf8Limit */ | |
| while(i>0 && (st2=mbcsData->stage1[--i])==0) {} | |
| /* stage2 up to the end of this block corresponds to stageUTF8 */ | |
| stage2Start=st2+MBCS_STAGE_2_BLOCK_SIZE; | |
| } | |
| header.options|=MBCS_OPT_NO_FROM_U; | |
| header.fullStage2Length=stage2Length; | |
| stage2Length-=stage2Start; | |
| if(VERBOSE) { | |
| printf("+ omitting %lu out of %lu stage2 entries and %lu fromUBytes\n", | |
| (unsigned long)stage2Start, | |
| (unsigned long)mbcsData->stage2Top, | |
| (unsigned long)mbcsData->stage3Top); | |
| printf("+ total size savings: %lu bytes\n", (unsigned long)stage2Start*4+mbcsData->stage3Top); | |
| } | |
| } else { | |
| stage2Start=0; | |
| } | |
| if(staticData->unicodeMask&UCNV_HAS_SUPPLEMENTARY) { | |
| stage1Top=MBCS_STAGE_1_SIZE; /* 0x440==1088 */ | |
| } else { | |
| stage1Top=0x40; /* 0x40==64 */ | |
| } | |
| /* adjust stage 1 entries to include the size of stage 1 in the offsets to stage 2 */ | |
| if(mbcsData->ucm->states.maxCharLength==1) { | |
| for(i=0; i<stage1Top; ++i) { | |
| mbcsData->stage1[i]+=(uint16_t)stage1Top; | |
| } | |
| /* stage2Top/Length have counted 16-bit results, now we need to count bytes */ | |
| /* also round up to a multiple of 4 bytes */ | |
| stage2Length=(stage2Length*2+1)&~1; | |
| /* stage3Top has counted 16-bit results, now we need to count bytes */ | |
| mbcsData->stage3Top*=2; | |
| if(mbcsData->utf8Friendly) { | |
| header.version[2]=(uint8_t)(SBCS_UTF8_MAX>>8); /* store 0x1f for max==0x1fff */ | |
| } | |
| } else { | |
| for(i=0; i<stage1Top; ++i) { | |
| mbcsData->stage1[i]+=(uint16_t)stage1Top/2; /* stage 2 contains 32-bit entries, stage 1 16-bit entries */ | |
| } | |
| /* stage2Top/Length have counted 32-bit results, now we need to count bytes */ | |
| stage2Length*=4; | |
| /* leave stage2Start counting 32-bit units */ | |
| if(mbcsData->utf8Friendly) { | |
| stageUTF8Length=(mbcsData->utf8Max+1)>>MBCS_UTF8_STAGE_SHIFT; | |
| header.version[2]=(uint8_t)(mbcsData->utf8Max>>8); /* store 0xd7 for max==0xd7ff */ | |
| } | |
| /* stage3Top has already counted bytes */ | |
| } | |
| /* round up stage3Top so that the sizes of all data blocks are multiples of 4 */ | |
| mbcsData->stage3Top=(mbcsData->stage3Top+3)&~3; | |
| /* fill the header */ | |
| if(header.options&MBCS_OPT_INCOMPATIBLE_MASK) { | |
| header.version[0]=5; | |
| if(header.options&MBCS_OPT_NO_FROM_U) { | |
| headerLength=10; /* include fullStage2Length */ | |
| } else { | |
| headerLength=MBCS_HEADER_V5_MIN_LENGTH; /* 9 */ | |
| } | |
| } else { | |
| header.version[0]=4; | |
| headerLength=MBCS_HEADER_V4_LENGTH; /* 8 */ | |
| } | |
| header.version[1]=4; | |
| /* header.version[2] set above for utf8Friendly data */ | |
| header.options|=(uint32_t)headerLength; | |
| header.countStates=mbcsData->ucm->states.countStates; | |
| header.countToUFallbacks=mbcsData->countToUFallbacks; | |
| header.offsetToUCodeUnits= | |
| headerLength*4+ | |
| mbcsData->ucm->states.countStates*1024+ | |
| mbcsData->countToUFallbacks*sizeof(_MBCSToUFallback); | |
| header.offsetFromUTable= | |
| header.offsetToUCodeUnits+ | |
| mbcsData->ucm->states.countToUCodeUnits*2; | |
| header.offsetFromUBytes= | |
| header.offsetFromUTable+ | |
| stage1Top*2+ | |
| stage2Length; | |
| header.fromUBytesLength=mbcsData->stage3Top; | |
| top=header.offsetFromUBytes+stageUTF8Length*2; | |
| if(!(header.options&MBCS_OPT_NO_FROM_U)) { | |
| top+=header.fromUBytesLength; | |
| } | |
| header.flags=(uint8_t)(mbcsData->ucm->states.outputType); | |
| if(tableType&TABLE_EXT) { | |
| if(top>0xffffff) { | |
| fprintf(stderr, "error: offset 0x%lx to extension table exceeds 0xffffff\n", (long)top); | |
| return 0; | |
| } | |
| header.flags|=top<<8; | |
| } | |
| /* write the MBCS data */ | |
| udata_writeBlock(pData, &header, headerLength*4); | |
| udata_writeBlock(pData, mbcsData->ucm->states.stateTable, header.countStates*1024); | |
| udata_writeBlock(pData, mbcsData->toUFallbacks, mbcsData->countToUFallbacks*sizeof(_MBCSToUFallback)); | |
| udata_writeBlock(pData, mbcsData->unicodeCodeUnits, mbcsData->ucm->states.countToUCodeUnits*2); | |
| udata_writeBlock(pData, mbcsData->stage1, stage1Top*2); | |
| if(mbcsData->ucm->states.maxCharLength==1) { | |
| udata_writeBlock(pData, mbcsData->stage2Single+stage2Start, stage2Length); | |
| } else { | |
| udata_writeBlock(pData, mbcsData->stage2+stage2Start, stage2Length); | |
| } | |
| if(!(header.options&MBCS_OPT_NO_FROM_U)) { | |
| udata_writeBlock(pData, mbcsData->fromUBytes, mbcsData->stage3Top); | |
| } | |
| if(stageUTF8Length>0) { | |
| udata_writeBlock(pData, mbcsData->stageUTF8, stageUTF8Length*2); | |
| } | |
| /* return the number of bytes that should have been written */ | |
| return top; | |
| } | |
| U_CDECL_END |