| // Copyright 2016 the V8 project authors. All rights reserved. |
| // Redistribution and use in source and binary forms, with or without |
| // modification, are permitted provided that the following conditions are |
| // met: |
| // |
| // * Redistributions of source code must retain the above copyright |
| // notice, this list of conditions and the following disclaimer. |
| // * Redistributions in binary form must reproduce the above |
| // copyright notice, this list of conditions and the following |
| // disclaimer in the documentation and/or other materials provided |
| // with the distribution. |
| // * Neither the name of Google Inc. nor the names of its |
| // contributors may be used to endorse or promote products derived |
| // from this software without specific prior written permission. |
| // |
| // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| // "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| // LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| // A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| // OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| // SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| // LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| // DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| // (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| // OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| |
| #include "src/v8.h" |
| #include "test/cctest/assembler-helper-arm.h" |
| #include "test/cctest/cctest.h" |
| |
| #include "src/assembler-inl.h" |
| #include "src/disassembler.h" |
| #include "src/factory.h" |
| #include "src/macro-assembler.h" |
| #include "src/simulator.h" |
| |
| namespace v8 { |
| namespace internal { |
| |
| // These tests rely on the behaviour specific to the simulator so we cannot |
| // expect the same results on real hardware. The reason for this is that our |
| // simulation of synchronisation primitives is more conservative than the |
| // reality. |
| // For example: |
| // ldrex r1, [r2] ; Load acquire at address r2; r2 is now marked as exclusive. |
| // ldr r0, [r4] ; This is a normal load, and at a different address. |
| // ; However, any memory accesses can potentially clear the |
| // ; exclusivity (See ARM DDI 0406C.c A3.4.5). This is unlikely |
| // ; on real hardware but to be conservative, the simulator |
| // ; always does it. |
| // strex r3, r1, [r2] ; As a result, this will always fail in the simulator |
| // ; but will likely succeed on hardware. |
| #if defined(USE_SIMULATOR) |
| |
| #ifndef V8_TARGET_LITTLE_ENDIAN |
| #error Expected ARM to be little-endian |
| #endif |
| |
| #define __ assm. |
| |
| namespace { |
| |
| struct MemoryAccess { |
| enum class Kind { |
| None, |
| Load, |
| LoadExcl, |
| Store, |
| StoreExcl, |
| }; |
| |
| enum class Size { |
| Byte, |
| HalfWord, |
| Word, |
| }; |
| |
| MemoryAccess() : kind(Kind::None) {} |
| MemoryAccess(Kind kind, Size size, size_t offset, int value = 0) |
| : kind(kind), size(size), offset(offset), value(value) {} |
| |
| Kind kind = Kind::None; |
| Size size = Size::Byte; |
| size_t offset = 0; |
| int value = 0; |
| }; |
| |
| struct TestData { |
| explicit TestData(int w) : w(w) {} |
| |
| union { |
| int32_t w; |
| int16_t h; |
| int8_t b; |
| }; |
| int dummy; |
| }; |
| |
| void AssembleMemoryAccess(Assembler* assembler, MemoryAccess access, |
| Register dest_reg, Register value_reg, |
| Register addr_reg) { |
| Assembler& assm = *assembler; |
| __ add(addr_reg, r0, Operand(access.offset)); |
| |
| switch (access.kind) { |
| case MemoryAccess::Kind::None: |
| break; |
| |
| case MemoryAccess::Kind::Load: |
| switch (access.size) { |
| case MemoryAccess::Size::Byte: |
| __ ldrb(value_reg, MemOperand(addr_reg)); |
| break; |
| |
| case MemoryAccess::Size::HalfWord: |
| __ ldrh(value_reg, MemOperand(addr_reg)); |
| break; |
| |
| case MemoryAccess::Size::Word: |
| __ ldr(value_reg, MemOperand(addr_reg)); |
| break; |
| } |
| break; |
| |
| case MemoryAccess::Kind::LoadExcl: |
| switch (access.size) { |
| case MemoryAccess::Size::Byte: |
| __ ldrexb(value_reg, addr_reg); |
| break; |
| |
| case MemoryAccess::Size::HalfWord: |
| __ ldrexh(value_reg, addr_reg); |
| break; |
| |
| case MemoryAccess::Size::Word: |
| __ ldrex(value_reg, addr_reg); |
| break; |
| } |
| break; |
| |
| case MemoryAccess::Kind::Store: |
| switch (access.size) { |
| case MemoryAccess::Size::Byte: |
| __ mov(value_reg, Operand(access.value)); |
| __ strb(value_reg, MemOperand(addr_reg)); |
| break; |
| |
| case MemoryAccess::Size::HalfWord: |
| __ mov(value_reg, Operand(access.value)); |
| __ strh(value_reg, MemOperand(addr_reg)); |
| break; |
| |
| case MemoryAccess::Size::Word: |
| __ mov(value_reg, Operand(access.value)); |
| __ str(value_reg, MemOperand(addr_reg)); |
| break; |
| } |
| break; |
| |
| case MemoryAccess::Kind::StoreExcl: |
| switch (access.size) { |
| case MemoryAccess::Size::Byte: |
| __ mov(value_reg, Operand(access.value)); |
| __ strexb(dest_reg, value_reg, addr_reg); |
| break; |
| |
| case MemoryAccess::Size::HalfWord: |
| __ mov(value_reg, Operand(access.value)); |
| __ strexh(dest_reg, value_reg, addr_reg); |
| break; |
| |
| case MemoryAccess::Size::Word: |
| __ mov(value_reg, Operand(access.value)); |
| __ strex(dest_reg, value_reg, addr_reg); |
| break; |
| } |
| break; |
| } |
| } |
| |
| void AssembleLoadExcl(Assembler* assembler, MemoryAccess access, |
| Register value_reg, Register addr_reg) { |
| DCHECK(access.kind == MemoryAccess::Kind::LoadExcl); |
| AssembleMemoryAccess(assembler, access, no_reg, value_reg, addr_reg); |
| } |
| |
| void AssembleStoreExcl(Assembler* assembler, MemoryAccess access, |
| Register dest_reg, Register value_reg, |
| Register addr_reg) { |
| DCHECK(access.kind == MemoryAccess::Kind::StoreExcl); |
| AssembleMemoryAccess(assembler, access, dest_reg, value_reg, addr_reg); |
| } |
| |
| void TestInvalidateExclusiveAccess(TestData initial_data, MemoryAccess access1, |
| MemoryAccess access2, MemoryAccess access3, |
| int expected_res, TestData expected_data) { |
| Isolate* isolate = CcTest::i_isolate(); |
| HandleScope scope(isolate); |
| |
| auto f = AssembleCode<int(TestData*, int, int, int)>([&](Assembler& assm) { |
| AssembleLoadExcl(&assm, access1, r1, r1); |
| AssembleMemoryAccess(&assm, access2, r3, r2, r1); |
| AssembleStoreExcl(&assm, access3, r0, r3, r1); |
| }); |
| |
| TestData t = initial_data; |
| |
| int res = f.Call(&t, 0, 0, 0); |
| CHECK_EQ(expected_res, res); |
| switch (access3.size) { |
| case MemoryAccess::Size::Byte: |
| CHECK_EQ(expected_data.b, t.b); |
| break; |
| |
| case MemoryAccess::Size::HalfWord: |
| CHECK_EQ(expected_data.h, t.h); |
| break; |
| |
| case MemoryAccess::Size::Word: |
| CHECK_EQ(expected_data.w, t.w); |
| break; |
| } |
| } |
| |
| } // namespace |
| |
| TEST(simulator_invalidate_exclusive_access) { |
| using Kind = MemoryAccess::Kind; |
| using Size = MemoryAccess::Size; |
| |
| MemoryAccess ldrex_w(Kind::LoadExcl, Size::Word, offsetof(TestData, w)); |
| MemoryAccess strex_w(Kind::StoreExcl, Size::Word, offsetof(TestData, w), 7); |
| |
| // Address mismatch. |
| TestInvalidateExclusiveAccess( |
| TestData(1), ldrex_w, |
| MemoryAccess(Kind::LoadExcl, Size::Word, offsetof(TestData, dummy)), |
| strex_w, 1, TestData(1)); |
| |
| // Size mismatch. |
| TestInvalidateExclusiveAccess( |
| TestData(1), ldrex_w, MemoryAccess(), |
| MemoryAccess(Kind::StoreExcl, Size::HalfWord, offsetof(TestData, w), 7), |
| 1, TestData(1)); |
| |
| // Load between ldrex/strex. |
| TestInvalidateExclusiveAccess( |
| TestData(1), ldrex_w, |
| MemoryAccess(Kind::Load, Size::Word, offsetof(TestData, dummy)), strex_w, |
| 1, TestData(1)); |
| |
| // Store between ldrex/strex. |
| TestInvalidateExclusiveAccess( |
| TestData(1), ldrex_w, |
| MemoryAccess(Kind::Store, Size::Word, offsetof(TestData, dummy)), strex_w, |
| 1, TestData(1)); |
| |
| // Match |
| TestInvalidateExclusiveAccess(TestData(1), ldrex_w, MemoryAccess(), strex_w, |
| 0, TestData(7)); |
| } |
| |
| namespace { |
| |
| int ExecuteMemoryAccess(Isolate* isolate, TestData* test_data, |
| MemoryAccess access) { |
| HandleScope scope(isolate); |
| auto f = AssembleCode<int(TestData*, int, int)>([&](Assembler& assm) { |
| AssembleMemoryAccess(&assm, access, r0, r2, r1); |
| }); |
| |
| return f.Call(test_data, 0, 0); |
| } |
| |
| } // namespace |
| |
| class MemoryAccessThread : public v8::base::Thread { |
| public: |
| MemoryAccessThread() |
| : Thread(Options("MemoryAccessThread")), |
| test_data_(nullptr), |
| is_finished_(false), |
| has_request_(false), |
| did_request_(false), |
| isolate_(nullptr) {} |
| |
| virtual void Run() { |
| v8::Isolate::CreateParams create_params; |
| create_params.array_buffer_allocator = CcTest::array_buffer_allocator(); |
| isolate_ = v8::Isolate::New(create_params); |
| Isolate* i_isolate = reinterpret_cast<Isolate*>(isolate_); |
| { |
| v8::Isolate::Scope scope(isolate_); |
| v8::base::LockGuard<v8::base::Mutex> lock_guard(&mutex_); |
| while (!is_finished_) { |
| while (!(has_request_ || is_finished_)) { |
| has_request_cv_.Wait(&mutex_); |
| } |
| |
| if (is_finished_) { |
| break; |
| } |
| |
| ExecuteMemoryAccess(i_isolate, test_data_, access_); |
| has_request_ = false; |
| did_request_ = true; |
| did_request_cv_.NotifyOne(); |
| } |
| } |
| isolate_->Dispose(); |
| } |
| |
| void NextAndWait(TestData* test_data, MemoryAccess access) { |
| DCHECK(!has_request_); |
| v8::base::LockGuard<v8::base::Mutex> lock_guard(&mutex_); |
| test_data_ = test_data; |
| access_ = access; |
| has_request_ = true; |
| has_request_cv_.NotifyOne(); |
| while (!did_request_) { |
| did_request_cv_.Wait(&mutex_); |
| } |
| did_request_ = false; |
| } |
| |
| void Finish() { |
| v8::base::LockGuard<v8::base::Mutex> lock_guard(&mutex_); |
| is_finished_ = true; |
| has_request_cv_.NotifyOne(); |
| } |
| |
| private: |
| TestData* test_data_; |
| MemoryAccess access_; |
| bool is_finished_; |
| bool has_request_; |
| bool did_request_; |
| v8::base::Mutex mutex_; |
| v8::base::ConditionVariable has_request_cv_; |
| v8::base::ConditionVariable did_request_cv_; |
| v8::Isolate* isolate_; |
| }; |
| |
| TEST(simulator_invalidate_exclusive_access_threaded) { |
| using Kind = MemoryAccess::Kind; |
| using Size = MemoryAccess::Size; |
| |
| Isolate* isolate = CcTest::i_isolate(); |
| HandleScope scope(isolate); |
| |
| TestData test_data(1); |
| |
| MemoryAccessThread thread; |
| thread.Start(); |
| |
| MemoryAccess ldrex_w(Kind::LoadExcl, Size::Word, offsetof(TestData, w)); |
| MemoryAccess strex_w(Kind::StoreExcl, Size::Word, offsetof(TestData, w), 7); |
| |
| // Exclusive store completed by another thread first. |
| test_data = TestData(1); |
| thread.NextAndWait(&test_data, MemoryAccess(Kind::LoadExcl, Size::Word, |
| offsetof(TestData, w))); |
| ExecuteMemoryAccess(isolate, &test_data, ldrex_w); |
| thread.NextAndWait(&test_data, MemoryAccess(Kind::StoreExcl, Size::Word, |
| offsetof(TestData, w), 5)); |
| CHECK_EQ(1, ExecuteMemoryAccess(isolate, &test_data, strex_w)); |
| CHECK_EQ(5, test_data.w); |
| |
| // Exclusive store completed by another thread; different address, but masked |
| // to same |
| test_data = TestData(1); |
| ExecuteMemoryAccess(isolate, &test_data, ldrex_w); |
| thread.NextAndWait(&test_data, MemoryAccess(Kind::LoadExcl, Size::Word, |
| offsetof(TestData, dummy))); |
| thread.NextAndWait(&test_data, MemoryAccess(Kind::StoreExcl, Size::Word, |
| offsetof(TestData, dummy), 5)); |
| CHECK_EQ(1, ExecuteMemoryAccess(isolate, &test_data, strex_w)); |
| CHECK_EQ(1, test_data.w); |
| |
| // Test failure when store between ldrex/strex. |
| test_data = TestData(1); |
| ExecuteMemoryAccess(isolate, &test_data, ldrex_w); |
| thread.NextAndWait(&test_data, MemoryAccess(Kind::Store, Size::Word, |
| offsetof(TestData, dummy))); |
| CHECK_EQ(1, ExecuteMemoryAccess(isolate, &test_data, strex_w)); |
| CHECK_EQ(1, test_data.w); |
| |
| thread.Finish(); |
| thread.Join(); |
| } |
| |
| #undef __ |
| |
| #endif // defined(USE_SIMULATOR) |
| |
| } // namespace internal |
| } // namespace v8 |