| # en_US.txt # |
| |
| # |
| #//===----------------------------------------------------------------------===// |
| #// |
| #// The LLVM Compiler Infrastructure |
| #// |
| #// This file is dual licensed under the MIT and the University of Illinois Open |
| #// Source Licenses. See LICENSE.txt for details. |
| #// |
| #//===----------------------------------------------------------------------===// |
| # |
| |
| # Default messages, embedded into the OpenMP RTL, and source for English catalog. |
| |
| |
| # Compatible changes (which does not require version bumping): |
| # * Editing message (number and type of placeholders must remain, relative order of |
| # placeholders may be changed, e.g. "File %1$s line %2$d" may be safely edited to |
| # "Line %2$d file %1$s"). |
| # * Adding new message to the end of section. |
| # Incompatible changes (version must be bumbed by 1): |
| # * Introducing new placeholders to existing messages. |
| # * Changing type of placeholders (e.g. "line %1$d" -> "line %1$s"). |
| # * Rearranging order of messages. |
| # * Deleting messages. |
| # Use special "OBSOLETE" pseudoidentifier for obsolete entries, which is kept only for backward |
| # compatibility. When version is bumped, do not forget to delete all obsolete entries. |
| |
| |
| # -------------------------------------------------------------------------------------------------- |
| -*- META -*- |
| # -------------------------------------------------------------------------------------------------- |
| |
| # Meta information about message catalog. |
| |
| Language "English" |
| Country "USA" |
| LangId "1033" |
| Version "2" |
| Revision "20170523" |
| |
| |
| |
| # -------------------------------------------------------------------------------------------------- |
| -*- STRINGS -*- |
| # -------------------------------------------------------------------------------------------------- |
| |
| # Strings are not complete messages, just fragments. We need to work on it and reduce number of |
| # strings (to zero?). |
| |
| Error "Error" |
| UnknownFile "(unknown file)" |
| NotANumber "not a number" |
| BadUnit "bad unit" |
| IllegalCharacters "illegal characters" |
| ValueTooLarge "value too large" |
| ValueTooSmall "value too small" |
| NotMultiple4K "value is not a multiple of 4k" |
| UnknownTopology "Unknown processor topology" |
| CantOpenCpuinfo "Cannot open /proc/cpuinfo" |
| ProcCpuinfo "/proc/cpuinfo" |
| NoProcRecords "cpuinfo file invalid (No processor records)" |
| TooManyProcRecords "cpuinfo file invalid (Too many processor records)" |
| CantRewindCpuinfo "Cannot rewind cpuinfo file" |
| LongLineCpuinfo "cpuinfo file invalid (long line)" |
| TooManyEntries "cpuinfo file contains too many entries" |
| MissingProcField "cpuinfo file missing processor field" |
| MissingPhysicalIDField "cpuinfo file missing physical id field" |
| MissingValCpuinfo "cpuinfo file invalid (missing val)" |
| DuplicateFieldCpuinfo "cpuinfo file invalid (duplicate field)" |
| PhysicalIDsNotUnique "Physical node/pkg/core/thread ids not unique" |
| ApicNotPresent "APIC not present" |
| InvalidCpuidInfo "Invalid cpuid info" |
| OBSOLETE "APIC ids not unique" |
| InconsistentCpuidInfo "Inconsistent cpuid info" |
| OutOfHeapMemory "Out of heap memory" |
| MemoryAllocFailed "Memory allocation failed" |
| Core "core" |
| Thread "thread" |
| Package "package" |
| Node "node" |
| OBSOLETE "<undef>" |
| DecodingLegacyAPIC "decoding legacy APIC ids" |
| OBSOLETE "parsing /proc/cpuinfo" |
| NotDefined "value is not defined" |
| EffectiveSettings "Effective settings:" |
| UserSettings "User settings:" |
| StorageMapWarning "warning: pointers or size don't make sense" |
| OBSOLETE "CPU" |
| OBSOLETE "TPU" |
| OBSOLETE "TPUs per package" |
| OBSOLETE "HT enabled" |
| OBSOLETE "HT disabled" |
| Decodingx2APIC "decoding x2APIC ids" |
| NoLeaf11Support "cpuid leaf 11 not supported" |
| NoLeaf4Support "cpuid leaf 4 not supported" |
| ThreadIDsNotUnique "thread ids not unique" |
| UsingPthread "using pthread info" |
| LegacyApicIDsNotUnique "legacy APIC ids not unique" |
| x2ApicIDsNotUnique "x2APIC ids not unique" |
| DisplayEnvBegin "OPENMP DISPLAY ENVIRONMENT BEGIN" |
| DisplayEnvEnd "OPENMP DISPLAY ENVIRONMENT END" |
| Device "[device]" |
| Host "[host]" |
| Tile "tile" |
| |
| |
| |
| # -------------------------------------------------------------------------------------------------- |
| -*- FORMATS -*- |
| # -------------------------------------------------------------------------------------------------- |
| |
| Info "OMP: Info #%1$d: %2$s\n" |
| Warning "OMP: Warning #%1$d: %2$s\n" |
| Fatal "OMP: Error #%1$d: %2$s\n" |
| SysErr "OMP: System error #%1$d: %2$s\n" |
| Hint "OMP: Hint %1$s\n" |
| |
| Pragma "%1$s pragma (at %2$s:%3$s():%4$s)" |
| # %1 is pragma name (like "parallel" or "master", |
| # %2 is file name, |
| # %3 is function (routine) name, |
| # %4 is the line number (as string, so "s" type specifier should be used). |
| |
| |
| |
| # -------------------------------------------------------------------------------------------------- |
| -*- MESSAGES -*- |
| # -------------------------------------------------------------------------------------------------- |
| |
| # Messages of any severity: informational, warning, or fatal. |
| # To maintain message numbers (they are visible to customers), add new messages to the end. |
| |
| # Use following prefixes for messages and hints when appropriate: |
| # Aff -- Affinity messages. |
| # Cns -- Consistency check failures (KMP_CONSISTENCY_CHECK). |
| # Itt -- ITT Notify-related messages. |
| |
| LibraryIsSerial "Library is \"serial\"." |
| CantOpenMessageCatalog "Cannot open message catalog \"%1$s\":" |
| WillUseDefaultMessages "Default messages will be used." |
| LockIsUninitialized "%1$s: Lock is uninitialized" |
| LockSimpleUsedAsNestable "%1$s: Lock was initialized as simple, but used as nestable" |
| LockNestableUsedAsSimple "%1$s: Lock was initialized as nestable, but used as simple" |
| LockIsAlreadyOwned "%1$s: Lock is already owned by requesting thread" |
| LockStillOwned "%1$s: Lock is still owned by a thread" |
| LockUnsettingFree "%1$s: Attempt to release a lock not owned by any thread" |
| LockUnsettingSetByAnother "%1$s: Attempt to release a lock owned by another thread" |
| StackOverflow "Stack overflow detected for OpenMP thread #%1$d" |
| StackOverlap "Stack overlap detected. " |
| AssertionFailure "Assertion failure at %1$s(%2$d)." |
| CantRegisterNewThread "Unable to register a new user thread." |
| DuplicateLibrary "Initializing %1$s, but found %2$s already initialized." |
| CantOpenFileForReading "Cannot open file \"%1$s\" for reading:" |
| CantGetEnvVar "Getting environment variable \"%1$s\" failed:" |
| CantSetEnvVar "Setting environment variable \"%1$s\" failed:" |
| CantGetEnvironment "Getting environment failed:" |
| BadBoolValue "%1$s=\"%2$s\": Wrong value, boolean expected." |
| SSPNotBuiltIn "No Helper Thread support built in this OMP library." |
| SPPSotfTerminateFailed "Helper thread failed to soft terminate." |
| BufferOverflow "Buffer overflow detected." |
| RealTimeSchedNotSupported "Real-time scheduling policy is not supported." |
| RunningAtMaxPriority "OMP application is running at maximum priority with real-time scheduling policy. " |
| CantChangeMonitorPriority "Changing priority of the monitor thread failed:" |
| MonitorWillStarve "Deadlocks are highly possible due to monitor thread starvation." |
| CantSetMonitorStackSize "Unable to set monitor thread stack size to %1$lu bytes:" |
| CantSetWorkerStackSize "Unable to set OMP thread stack size to %1$lu bytes:" |
| CantInitThreadAttrs "Thread attribute initialization failed:" |
| CantDestroyThreadAttrs "Thread attribute destroying failed:" |
| CantSetWorkerState "OMP thread joinable state setting failed:" |
| CantSetMonitorState "Monitor thread joinable state setting failed:" |
| NoResourcesForWorkerThread "System unable to allocate necessary resources for OMP thread:" |
| NoResourcesForMonitorThread "System unable to allocate necessary resources for the monitor thread:" |
| CantTerminateWorkerThread "Unable to terminate OMP thread:" |
| ScheduleKindOutOfRange "Wrong schedule type %1$d, see <omp.h> or <omp_lib.h> file for the list of values supported." |
| UnknownSchedulingType "Unknown scheduling type \"%1$d\"." |
| InvalidValue "%1$s value \"%2$s\" is invalid." |
| SmallValue "%1$s value \"%2$s\" is too small." |
| LargeValue "%1$s value \"%2$s\" is too large." |
| StgInvalidValue "%1$s: \"%2$s\" is an invalid value; ignored." |
| BarrReleaseValueInvalid "%1$s release value \"%2$s\" is invalid." |
| BarrGatherValueInvalid "%1$s gather value \"%2$s\" is invalid." |
| OBSOLETE "%1$s supported only on debug builds; ignored." |
| ParRangeSyntax "Syntax error: Usage: %1$s=[ routine=<func> | filename=<file> | range=<lb>:<ub> " |
| "| excl_range=<lb>:<ub> ],..." |
| UnbalancedQuotes "Unbalanced quotes in %1$s." |
| EmptyString "Empty string specified for %1$s; ignored." |
| LongValue "%1$s value is too long; ignored." |
| InvalidClause "%1$s: Invalid clause in \"%2$s\"." |
| EmptyClause "Empty clause in %1$s." |
| InvalidChunk "%1$s value \"%2$s\" is invalid chunk size." |
| LargeChunk "%1$s value \"%2$s\" is to large chunk size." |
| IgnoreChunk "%1$s value \"%2$s\" is ignored." |
| CantGetProcFreq "Cannot get processor frequency, using zero KMP_ITT_PREPARE_DELAY." |
| EnvParallelWarn "%1$s must be set prior to first parallel region; ignored." |
| AffParamDefined "%1$s: parameter has been specified already, ignoring \"%2$s\"." |
| AffInvalidParam "%1$s: parameter invalid, ignoring \"%2$s\"." |
| AffManyParams "%1$s: too many integer parameters specified, ignoring \"%2$s\"." |
| AffManyParamsForLogic "%1$s: too many integer parameters specified for logical or physical type, ignoring \"%2$d\"." |
| AffNoParam "%1$s: '%2$s' type does not take any integer parameters, ignoring them." |
| AffNoProcList "%1$s: proclist not specified with explicit affinity type, using \"none\"." |
| AffProcListNoType "%1$s: proclist specified, setting affinity type to \"explicit\"." |
| AffProcListNotExplicit "%1$s: proclist specified without \"explicit\" affinity type, proclist ignored." |
| AffSyntaxError "%1$s: syntax error, not using affinity." |
| AffZeroStride "%1$s: range error (zero stride), not using affinity." |
| AffStartGreaterEnd "%1$s: range error (%2$d > %3$d), not using affinity." |
| AffStrideLessZero "%1$s: range error (%2$d < %3$d & stride < 0), not using affinity." |
| AffRangeTooBig "%1$s: range error ((%2$d-%3$d)/%4$d too big), not using affinity." |
| OBSOLETE "%1$s: %2$s is defined. %3$s will be ignored." |
| AffNotSupported "%1$s: affinity not supported, using \"disabled\"." |
| OBSOLETE "%1$s: affinity only supported for Intel(R) Architecture Processors." |
| GetAffSysCallNotSupported "%1$s: getaffinity system call not supported." |
| SetAffSysCallNotSupported "%1$s: setaffinity system call not supported." |
| OBSOLETE "%1$s: pthread_aff_set_np call not found." |
| OBSOLETE "%1$s: pthread_get_num_resources_np call not found." |
| OBSOLETE "%1$s: the OS kernel does not support affinity." |
| OBSOLETE "%1$s: pthread_get_num_resources_np returned %2$d." |
| AffCantGetMaskSize "%1$s: cannot determine proper affinity mask size." |
| ParseSizeIntWarn "%1$s=\"%2$s\": %3$s." |
| ParseExtraCharsWarn "%1$s: extra trailing characters ignored: \"%2$s\"." |
| UnknownForceReduction "%1$s: unknown method \"%2$s\"." |
| TimerUseGettimeofday "KMP_STATS_TIMER: clock_gettime is undefined, using gettimeofday." |
| TimerNeedMoreParam "KMP_STATS_TIMER: \"%1$s\" needs additional parameter, e.g. 'clock_gettime,2'. Using gettimeofday." |
| TimerInvalidParam "KMP_STATS_TIMER: clock_gettime parameter \"%1$s\" is invalid, using gettimeofday." |
| TimerGettimeFailed "KMP_STATS_TIMER: clock_gettime failed, using gettimeofday." |
| TimerUnknownFunction "KMP_STATS_TIMER: clock function unknown (ignoring value \"%1$s\")." |
| UnknownSchedTypeDetected "Unknown scheduling type detected." |
| DispatchManyThreads "Too many threads to use analytical guided scheduling - switching to iterative guided scheduling." |
| IttLookupFailed "ittnotify: Lookup of \"%1$s\" function in \"%2$s\" library failed." |
| IttLoadLibFailed "ittnotify: Loading \"%1$s\" library failed." |
| IttAllNotifDisabled "ittnotify: All itt notifications disabled." |
| IttObjNotifDisabled "ittnotify: Object state itt notifications disabled." |
| IttMarkNotifDisabled "ittnotify: Mark itt notifications disabled." |
| IttUnloadLibFailed "ittnotify: Unloading \"%1$s\" library failed." |
| CantFormThrTeam "Cannot form a team with %1$d threads, using %2$d instead." |
| ActiveLevelsNegative "Requested number of active parallel levels \"%1$d\" is negative; ignored." |
| ActiveLevelsExceedLimit "Requested number of active parallel levels \"%1$d\" exceeds supported limit; " |
| "the following limit value will be used: \"%1$d\"." |
| SetLibraryIncorrectCall "kmp_set_library must only be called from the top level serial thread; ignored." |
| FatalSysError "Fatal system error detected." |
| OutOfHeapMemory "Out of heap memory." |
| OBSOLETE "Clearing __KMP_REGISTERED_LIB env var failed." |
| OBSOLETE "Registering library with env var failed." |
| Using_int_Value "%1$s value \"%2$d\" will be used." |
| Using_uint_Value "%1$s value \"%2$u\" will be used." |
| Using_uint64_Value "%1$s value \"%2$s\" will be used." |
| Using_str_Value "%1$s value \"%2$s\" will be used." |
| MaxValueUsing "%1$s maximum value \"%2$d\" will be used." |
| MinValueUsing "%1$s minimum value \"%2$d\" will be used." |
| MemoryAllocFailed "Memory allocation failed." |
| FileNameTooLong "File name too long." |
| OBSOLETE "Lock table overflow." |
| ManyThreadsForTPDirective "Too many threads to use threadprivate directive." |
| AffinityInvalidMask "%1$s: invalid mask." |
| WrongDefinition "Wrong definition." |
| TLSSetValueFailed "Windows* OS: TLS Set Value failed." |
| TLSOutOfIndexes "Windows* OS: TLS out of indexes." |
| OBSOLETE "PDONE directive must be nested within a DO directive." |
| CantGetNumAvailCPU "Cannot get number of available CPUs." |
| AssumedNumCPU "Assumed number of CPUs is 2." |
| ErrorInitializeAffinity "Error initializing affinity - not using affinity." |
| AffThreadsMayMigrate "Threads may migrate across all available OS procs (granularity setting too coarse)." |
| AffIgnoreInvalidProcID "Ignoring invalid OS proc ID %1$d." |
| AffNoValidProcID "No valid OS proc IDs specified - not using affinity." |
| UsingFlatOS "%1$s - using \"flat\" OS <-> physical proc mapping." |
| UsingFlatOSFile "%1$s: %2$s - using \"flat\" OS <-> physical proc mapping." |
| UsingFlatOSFileLine "%1$s, line %2$d: %3$s - using \"flat\" OS <-> physical proc mapping." |
| FileMsgExiting "%1$s: %2$s - exiting." |
| FileLineMsgExiting "%1$s, line %2$d: %3$s - exiting." |
| ConstructIdentInvalid "Construct identifier invalid." |
| ThreadIdentInvalid "Thread identifier invalid." |
| RTLNotInitialized "runtime library not initialized." |
| TPCommonBlocksInconsist "Inconsistent THREADPRIVATE common block declarations are non-conforming " |
| "and are unsupported. Either all threadprivate common blocks must be declared " |
| "identically, or the largest instance of each threadprivate common block " |
| "must be referenced first during the run." |
| CantSetThreadAffMask "Cannot set thread affinity mask." |
| CantSetThreadPriority "Cannot set thread priority." |
| CantCreateThread "Cannot create thread." |
| CantCreateEvent "Cannot create event." |
| CantSetEvent "Cannot set event." |
| CantCloseHandle "Cannot close handle." |
| UnknownLibraryType "Unknown library type: %1$d." |
| ReapMonitorError "Monitor did not reap properly." |
| ReapWorkerError "Worker thread failed to join." |
| ChangeThreadAffMaskError "Cannot change thread affinity mask." |
| ThreadsMigrate "%1$s: Threads may migrate across %2$d innermost levels of machine" |
| DecreaseToThreads "%1$s: decrease to %2$d threads" |
| IncreaseToThreads "%1$s: increase to %2$d threads" |
| OBSOLETE "%1$s: Internal thread %2$d bound to OS proc set %3$s" |
| AffCapableUseCpuinfo "%1$s: Affinity capable, using cpuinfo file" |
| AffUseGlobCpuid "%1$s: Affinity capable, using global cpuid info" |
| AffCapableUseFlat "%1$s: Affinity capable, using default \"flat\" topology" |
| AffNotCapableUseLocCpuid "%1$s: Affinity not capable, using local cpuid info" |
| AffNotCapableUseCpuinfo "%1$s: Affinity not capable, using cpuinfo file" |
| AffFlatTopology "%1$s: Affinity not capable, assumming \"flat\" topology" |
| InitOSProcSetRespect "%1$s: Initial OS proc set respected: %2$s" |
| InitOSProcSetNotRespect "%1$s: Initial OS proc set not respected: %2$s" |
| AvailableOSProc "%1$s: %2$d available OS procs" |
| Uniform "%1$s: Uniform topology" |
| NonUniform "%1$s: Nonuniform topology" |
| Topology "%1$s: %2$d packages x %3$d cores/pkg x %4$d threads/core (%5$d total cores)" |
| OBSOLETE "%1$s: OS proc to physical thread map ([] => level not in map):" |
| OSProcToPackage "%1$s: OS proc <n> maps to <n>th package core 0" |
| OBSOLETE "%1$s: OS proc %2$d maps to package %3$d [core %4$d] [thread %5$d]" |
| OBSOLETE "%1$s: OS proc %2$d maps to [package %3$d] [core %4$d] [thread %5$d]" |
| OBSOLETE "%1$s: OS proc %2$d maps to [package %3$d] [core %4$d] thread %5$d" |
| OBSOLETE "%1$s: OS proc %2$d maps to [package %3$d] core %4$d [thread %5$d]" |
| OBSOLETE "%1$s: OS proc %2$d maps to package %3$d [core %4$d] [thread %5$d]" |
| OBSOLETE "%1$s: OS proc %2$d maps to [package %3$d] core %4$d thread %5$d" |
| OBSOLETE "%1$s: OS proc %2$d maps to package %3$d core %4$d [thread %5$d]" |
| OBSOLETE "%1$s: OS proc %2$d maps to package %3$d [core %4$d] thread %5$d" |
| OBSOLETE "%1$s: OS proc %2$d maps to package %3$d core %4$d thread %5$d" |
| OSProcMapToPack "%1$s: OS proc %2$d maps to %3$s" |
| OBSOLETE "%1$s: Internal thread %2$d changed affinity mask from %3$s to %4$s" |
| OBSOLETE "%1$s: OS proc %2$d maps to package %3$d, CPU %4$d, TPU %5$d" |
| OBSOLETE "%1$s: OS proc %2$d maps to package %3$d, CPU %4$d" |
| OBSOLETE "%1$s: HT enabled; %2$d packages; %3$d TPU; %4$d TPUs per package" |
| OBSOLETE "%1$s: HT disabled; %2$d packages" |
| BarriersInDifferentOrder "Threads encountered barriers in different order. " |
| FunctionError "Function %1$s failed:" |
| TopologyExtra "%1$s: %2$s packages x %3$d cores/pkg x %4$d threads/core (%5$d total cores)" |
| WrongMessageCatalog "Incompatible message catalog \"%1$s\": Version \"%2$s\" found, version \"%3$s\" expected." |
| StgIgnored "%1$s: ignored because %2$s has been defined" |
| # %1, -- name of ignored variable, %2 -- name of variable with higher priority. |
| OBSOLETE "%1$s: overrides %3$s specified before" |
| # %1, %2 -- name and value of the overriding variable, %3 -- name of overriden variable. |
| AffTilesNoHWLOC "%1$s: Tiles are only supported if KMP_TOPOLOGY_METHOD=hwloc, using granularity=package instead" |
| AffTilesNoTiles "%1$s: Tiles requested but were not detected on this HW, using granularity=package instead" |
| TopologyExtraTile "%1$s: %2$d packages x %3$d tiles/pkg x %4$d cores/tile x %5$d threads/core (%6$d total cores)" |
| TopologyExtraNode "%1$s: %2$d packages x %3$d nodes/pkg x %4$d cores/node x %5$d threads/core (%6$d total cores)" |
| TopologyExtraNoTi "%1$s: %2$d packages x %3$d nodes/pkg x %4$d tiles/node x %5$d cores/tile x %6$d threads/core (%7$d total cores)" |
| OmptOutdatedWorkshare "OMPT: Cannot determine workshare type; using the default (loop) instead. " |
| "This issue is fixed in an up-to-date compiler." |
| |
| # --- OpenMP errors detected at runtime --- |
| # |
| # %1 is the name of OpenMP construct (formatted with "Pragma" format). |
| # |
| CnsBoundToWorksharing "%1$s must be bound to a work-sharing or work-queuing construct with an \"ordered\" clause" |
| CnsDetectedEnd "Detected end of %1$s without first executing a corresponding beginning." |
| CnsIterationRangeTooLarge "Iteration range too large in %1$s." |
| CnsLoopIncrZeroProhibited "%1$s must not have a loop increment that evaluates to zero." |
| # |
| # %1 is the name of the first OpenMP construct, %2 -- the name of the second one (both formatted with "Pragma" format). |
| # |
| CnsExpectedEnd "Expected end of %1$s; %2$s, however, has most recently begun execution." |
| CnsInvalidNesting "%1$s is incorrectly nested within %2$s" |
| CnsMultipleNesting "%1$s cannot be executed multiple times during execution of one parallel iteration/section of %2$s" |
| CnsNestingSameName "%1$s is incorrectly nested within %2$s of the same name" |
| CnsNoOrderedClause "%1$s is incorrectly nested within %2$s that does not have an \"ordered\" clause" |
| CnsNotInTaskConstruct "%1$s is incorrectly nested within %2$s but not within any of its \"task\" constructs" |
| CnsThreadsAtBarrier "One thread at %1$s while another thread is at %2$s." |
| |
| # New errors |
| CantConnect "Cannot connect to %1$s" |
| CantConnectUsing "Cannot connect to %1$s - Using %2$s" |
| LibNotSupport "%1$s does not support %2$s. Continuing without using %2$s." |
| LibNotSupportFor "%1$s does not support %2$s for %3$s. Continuing without using %2$s." |
| StaticLibNotSupport "Static %1$s does not support %2$s. Continuing without using %2$s." |
| OBSOLETE "KMP_DYNAMIC_MODE=irml cannot be used with KMP_USE_IRML=0" |
| IttUnknownGroup "ittnotify: Unknown group \"%2$s\" specified in environment variable \"%1$s\"." |
| IttEnvVarTooLong "ittnotify: Environment variable \"%1$s\" too long: Actual lengths is %2$lu, max allowed length is %3$lu." |
| AffUseGlobCpuidL11 "%1$s: Affinity capable, using global cpuid leaf 11 info" |
| AffNotCapableUseLocCpuidL11 "%1$s: Affinity not capable, using local cpuid leaf 11 info" |
| AffInfoStr "%1$s: %2$s." |
| AffInfoStrStr "%1$s: %2$s - %3$s." |
| OSProcToPhysicalThreadMap "%1$s: OS proc to physical thread map:" |
| AffUsingFlatOS "%1$s: using \"flat\" OS <-> physical proc mapping." |
| AffParseFilename "%1$s: parsing %2$s." |
| MsgExiting "%1$s - exiting." |
| IncompatibleLibrary "Incompatible %1$s library with version %2$s found." |
| IttFunctionError "ittnotify: Function %1$s failed:" |
| IttUnknownError "ittnofify: Error #%1$d." |
| EnvMiddleWarn "%1$s must be set prior to first parallel region or certain API calls; ignored." |
| CnsLockNotDestroyed "Lock initialized at %1$s(%2$d) was not destroyed" |
| # %1, %2, %3, %4 -- file, line, func, col |
| CantLoadBalUsing "Cannot determine machine load balance - Using %1$s" |
| AffNotCapableUsePthread "%1$s: Affinity not capable, using pthread info" |
| AffUsePthread "%1$s: Affinity capable, using pthread info" |
| OBSOLETE "Loading \"%1$s\" library failed:" |
| OBSOLETE "Lookup of \"%1$s\" function failed:" |
| OBSOLETE "Buffer too small." |
| OBSOLETE "Error #%1$d." |
| NthSyntaxError "%1$s: Invalid symbols found. Check the value \"%2$s\"." |
| NthSpacesNotAllowed "%1$s: Spaces between digits are not allowed \"%2$s\"." |
| AffStrParseFilename "%1$s: %2$s - parsing %3$s." |
| OBSOLETE "%1$s cannot be specified via kmp_set_defaults() on this machine because it has more than one processor group." |
| AffTypeCantUseMultGroups "Cannot use affinity type \"%1$s\" with multiple Windows* OS processor groups, using \"%2$s\"." |
| AffGranCantUseMultGroups "Cannot use affinity granularity \"%1$s\" with multiple Windows* OS processor groups, using \"%2$s\"." |
| AffWindowsProcGroupMap "%1$s: Mapping Windows* OS processor group <i> proc <j> to OS proc 64*<i>+<j>." |
| AffOSProcToGroup "%1$s: OS proc %2$d maps to Windows* OS processor group %3$d proc %4$d" |
| AffBalancedNotAvail "%1$s: Affinity balanced is not available." |
| OBSOLETE "%1$s: granularity=core will be used." |
| EnvLockWarn "%1$s must be set prior to first OMP lock call or critical section; ignored." |
| FutexNotSupported "futex system call not supported; %1$s=%2$s ignored." |
| AffGranUsing "%1$s: granularity=%2$s will be used." |
| AffHWSubsetInvalid "%1$s: invalid value \"%2$s\", valid format is \"N<item>[@N][,...][,Nt] " |
| "(<item> can be S, N, L2, C, T for Socket, NUMA Node, L2 Cache, Core, Thread)\"." |
| AffHWSubsetUnsupported "KMP_HW_SUBSET ignored: unsupported architecture." |
| AffHWSubsetManyCores "KMP_HW_SUBSET ignored: too many cores requested." |
| SyntaxErrorUsing "%1$s: syntax error, using %2$s." |
| AdaptiveNotSupported "%1$s: Adaptive locks are not supported; using queuing." |
| EnvSyntaxError "%1$s: Invalid symbols found. Check the value \"%2$s\"." |
| EnvSpacesNotAllowed "%1$s: Spaces between digits are not allowed \"%2$s\"." |
| BoundToOSProcSet "%1$s: pid %2$d tid %3$d thread %4$d bound to OS proc set %5$s" |
| CnsLoopIncrIllegal "%1$s error: parallel loop increment and condition are inconsistent." |
| NoGompCancellation "libgomp cancellation is not currently supported." |
| AffHWSubsetNonUniform "KMP_HW_SUBSET ignored: non-uniform topology." |
| AffHWSubsetNonThreeLevel "KMP_HW_SUBSET ignored: only three-level topology is supported." |
| AffGranTopGroup "%1$s: granularity=%2$s is not supported with KMP_TOPOLOGY_METHOD=group. Using \"granularity=fine\"." |
| AffGranGroupType "%1$s: granularity=group is not supported with KMP_AFFINITY=%2$s. Using \"granularity=core\"." |
| AffHWSubsetManySockets "KMP_HW_SUBSET ignored: too many sockets requested." |
| AffHWSubsetDeprecated "KMP_HW_SUBSET \"o\" offset designator deprecated, please use @ prefix for offset value." |
| AffUsingHwloc "%1$s: Affinity capable, using hwloc." |
| AffIgnoringHwloc "%1$s: Ignoring hwloc mechanism." |
| AffHwlocErrorOccurred "%1$s: Hwloc failed in %2$s. Relying on internal affinity mechanisms." |
| EnvSerialWarn "%1$s must be set prior to OpenMP runtime library initialization; ignored." |
| EnvVarDeprecated "%1$s variable deprecated, please use %2$s instead." |
| RedMethodNotSupported "KMP_FORCE_REDUCTION: %1$s method is not supported; using critical." |
| AffHWSubsetNoHWLOC "KMP_HW_SUBSET ignored: unsupported item requested for non-HWLOC topology method (KMP_TOPOLOGY_METHOD)" |
| AffHWSubsetManyNodes "KMP_HW_SUBSET ignored: too many NUMA Nodes requested." |
| AffHWSubsetManyTiles "KMP_HW_SUBSET ignored: too many L2 Caches requested." |
| AffHWSubsetManyProcs "KMP_HW_SUBSET ignored: too many Procs requested." |
| HierSchedInvalid "Hierarchy ignored: unsupported level: %1$s." |
| |
| |
| # -------------------------------------------------------------------------------------------------- |
| -*- HINTS -*- |
| # -------------------------------------------------------------------------------------------------- |
| |
| # Hints. Hint may be printed after a message. Usually it is longer explanation text or suggestion. |
| # To maintain hint numbers (they are visible to customers), add new hints to the end. |
| |
| SubmitBugReport "Please submit a bug report with this message, compile and run " |
| "commands used, and machine configuration info including native " |
| "compiler and operating system versions. Faster response will be " |
| "obtained by including all program sources. For information on " |
| "submitting this issue, please see " |
| "https://bugs.llvm.org/." |
| OBSOLETE "Check NLSPATH environment variable, its value is \"%1$s\"." |
| ChangeStackLimit "Please try changing the shell stack limit or adjusting the " |
| "OMP_STACKSIZE environment variable." |
| Unset_ALL_THREADS "Consider unsetting KMP_DEVICE_THREAD_LIMIT (KMP_ALL_THREADS), KMP_TEAMS_THREAD_LIMIT, and OMP_THREAD_LIMIT (if any are set)." |
| Set_ALL_THREADPRIVATE "Consider setting KMP_ALL_THREADPRIVATE to a value larger than %1$d." |
| PossibleSystemLimitOnThreads "This could also be due to a system-related limit on the number of threads." |
| DuplicateLibrary "This means that multiple copies of the OpenMP runtime have been " |
| "linked into the program. That is dangerous, since it can degrade " |
| "performance or cause incorrect results. " |
| "The best thing to do is to ensure that only a single OpenMP runtime is " |
| "linked into the process, e.g. by avoiding static linking of the OpenMP " |
| "runtime in any library. As an unsafe, unsupported, undocumented workaround " |
| "you can set the environment variable KMP_DUPLICATE_LIB_OK=TRUE to allow " |
| "the program to continue to execute, but that may cause crashes or " |
| "silently produce incorrect results. " |
| "For more information, please see http://openmp.llvm.org/" |
| NameComesFrom_CPUINFO_FILE "This name is specified in environment variable KMP_CPUINFO_FILE." |
| NotEnoughMemory "Seems application required too much memory." |
| ValidBoolValues "Use \"0\", \"FALSE\". \".F.\", \"off\", \"no\" as false values, " |
| "\"1\", \"TRUE\", \".T.\", \"on\", \"yes\" as true values." |
| BufferOverflow "Perhaps too many threads." |
| RunningAtMaxPriority "Decrease priority of application. " |
| "This will allow the monitor thread run at higher priority than other threads." |
| ChangeMonitorStackSize "Try changing KMP_MONITOR_STACKSIZE or the shell stack limit." |
| ChangeWorkerStackSize "Try changing OMP_STACKSIZE and/or the shell stack limit." |
| IncreaseWorkerStackSize "Try increasing OMP_STACKSIZE or the shell stack limit." |
| DecreaseWorkerStackSize "Try decreasing OMP_STACKSIZE." |
| Decrease_NUM_THREADS "Try decreasing the value of OMP_NUM_THREADS." |
| IncreaseMonitorStackSize "Try increasing KMP_MONITOR_STACKSIZE." |
| DecreaseMonitorStackSize "Try decreasing KMP_MONITOR_STACKSIZE." |
| DecreaseNumberOfThreadsInUse "Try decreasing the number of threads in use simultaneously." |
| DefaultScheduleKindUsed "Will use default schedule type (%1$s)." |
| GetNewerLibrary "It could be a result of using an older OMP library with a newer " |
| "compiler or memory corruption. You may check the proper OMP library " |
| "is linked to the application." |
| CheckEnvVar "Check %1$s environment variable, its value is \"%2$s\"." |
| OBSOLETE "You may want to use an %1$s library that supports %2$s interface with version %3$s." |
| OBSOLETE "You may want to use an %1$s library with version %2$s." |
| BadExeFormat "System error #193 is \"Bad format of EXE or DLL file\". " |
| "Usually it means the file is found, but it is corrupted or " |
| "a file for another architecture. " |
| "Check whether \"%1$s\" is a file for %2$s architecture." |
| SystemLimitOnThreads "System-related limit on the number of threads." |
| |
| |
| |
| # -------------------------------------------------------------------------------------------------- |
| # end of file # |
| # -------------------------------------------------------------------------------------------------- |
| |