third_party/v8/src/base/atomicops.h

// Copyright 2010 the V8 project authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.

// The routines exported by this module are subtle.  If you use them, even if
// you get the code right, it will depend on careful reasoning about atomicity
// and memory ordering; it will be less readable, and harder to maintain.  If
// you plan to use these routines, you should have a good reason, such as solid
// evidence that performance would otherwise suffer, or there being no
// alternative.  You should assume only properties explicitly guaranteed by the
// specifications in this file.  You are almost certainly _not_ writing code
// just for the x86; if you assume x86 semantics, x86 hardware bugs and
// implementations on other archtectures will cause your code to break.  If you
// do not know what you are doing, avoid these routines, and use a Mutex.
//
// It is incorrect to make direct assignments to/from an atomic variable.
// You should use one of the Load or Store routines.  The Relaxed  versions
// are provided when no fences are needed:
//   Relaxed_Store()
//   Relaxed_Load()
// Although there are currently no compiler enforcement, you are encouraged
// to use these.
//

#ifndef V8_BASE_ATOMICOPS_H_
#define V8_BASE_ATOMICOPS_H_

#include <stdint.h>

// Small C++ header which defines implementation specific macros used to
// identify the STL implementation.
// - libc++: captures __config for _LIBCPP_VERSION
// - libstdc++: captures bits/c++config.h for __GLIBCXX__
#include <cstddef>

#include "src/base/base-export.h"
#include "src/base/build_config.h"

#if defined(V8_OS_STARBOARD)
#include "starboard/atomic.h"
#endif  // V8_OS_STARBOARD

namespace v8 {
namespace base {

#ifdef V8_OS_STARBOARD
using Atomic8 = SbAtomic8;
using Atomic16 = int16_t;
using Atomic32 = SbAtomic32;
#if SB_IS_64_BIT
using Atomic64 = SbAtomic64;
#endif
#else
using Atomic8 = char;
using Atomic16 = int16_t;
using Atomic32 = int32_t;
#if defined(V8_HOST_ARCH_64_BIT)
// We need to be able to go between Atomic64 and AtomicWord implicitly.  This
// means Atomic64 and AtomicWord should be the same type on 64-bit.
#if defined(__ILP32__)
using Atomic64 = int64_t;
#else
using Atomic64 = intptr_t;
#endif  // defined(__ILP32__)
#endif  // defined(V8_HOST_ARCH_64_BIT)
#endif  // V8_OS_STARBOARD

// Use AtomicWord for a machine-sized pointer.  It will use the Atomic32 or
// Atomic64 routines below, depending on your architecture.
#if defined(V8_OS_STARBOARD)
using AtomicWord = SbAtomicPtr;
#else
using AtomicWord = intptr_t;
#endif

// Atomically execute:
//   result = *ptr;
//   if (result == old_value)
//     *ptr = new_value;
//   return result;
//
// I.e. replace |*ptr| with |new_value| if |*ptr| used to be |old_value|.
// Always return the value of |*ptr| before the operation.
// Acquire, Relaxed, Release correspond to standard C++ memory orders.
Atomic8 Relaxed_CompareAndSwap(volatile Atomic8* ptr, Atomic8 old_value,
                               Atomic8 new_value);
Atomic16 Relaxed_CompareAndSwap(volatile Atomic16* ptr, Atomic16 old_value,
                                Atomic16 new_value);
Atomic32 Acquire_CompareAndSwap(volatile Atomic32* ptr, Atomic32 old_value,
                                Atomic32 new_value);
Atomic32 AcquireRelease_CompareAndSwap(volatile Atomic32* ptr,
                                       Atomic32 old_value, Atomic32 new_value);
Atomic32 Relaxed_CompareAndSwap(volatile Atomic32* ptr, Atomic32 old_value,
                                Atomic32 new_value);
Atomic32 Release_CompareAndSwap(volatile Atomic32* ptr, Atomic32 old_value,
                                Atomic32 new_value);
#ifdef V8_HOST_ARCH_64_BIT
Atomic64 Acquire_CompareAndSwap(volatile Atomic64* ptr, Atomic64 old_value,
                                Atomic64 new_value);
Atomic64 AcquireRelease_CompareAndSwap(volatile Atomic64* ptr,
                                       Atomic64 old_value, Atomic64 new_value);
Atomic64 Relaxed_CompareAndSwap(volatile Atomic64* ptr, Atomic64 old_value,
                                Atomic64 new_value);
Atomic64 Release_CompareAndSwap(volatile Atomic64* ptr, Atomic64 old_value,
                                Atomic64 new_value);
#endif  // V8_HOST_ARCH_64_BIT

// Atomically store new_value into |*ptr|, returning the previous value held in
// |*ptr|.
Atomic32 Relaxed_AtomicExchange(volatile Atomic32* ptr, Atomic32 new_value);
#ifdef V8_HOST_ARCH_64_BIT
Atomic64 Relaxed_AtomicExchange(volatile Atomic64* ptr, Atomic64 new_value);
#endif  // V8_HOST_ARCH_64_BIT

// Atomically increment |*ptr| by |increment|. Returns the new value of
// |*ptr| with the increment applied.
Atomic32 Relaxed_AtomicIncrement(volatile Atomic32* ptr, Atomic32 increment);

#ifdef V8_HOST_ARCH_64_BIT
Atomic64 Relaxed_AtomicIncrement(volatile Atomic64* ptr, Atomic64 increment);
#endif  // V8_HOST_ARCH_64_BIT

void SeqCst_MemoryFence();

void Relaxed_Store(volatile Atomic8* ptr, Atomic8 value);
void Relaxed_Store(volatile Atomic16* ptr, Atomic16 value);
void Relaxed_Store(volatile Atomic32* ptr, Atomic32 value);
void Release_Store(volatile Atomic32* ptr, Atomic32 value);
#ifdef V8_HOST_ARCH_64_BIT
void Relaxed_Store(volatile Atomic64* ptr, Atomic64 value);
void Release_Store(volatile Atomic64* ptr, Atomic64 value);
#endif  // V8_HOST_ARCH_64_BIT

Atomic8 Relaxed_Load(volatile const Atomic8* ptr);
Atomic16 Relaxed_Load(volatile const Atomic16* ptr);
Atomic32 Relaxed_Load(volatile const Atomic32* ptr);
Atomic32 Acquire_Load(volatile const Atomic32* ptr);
#ifdef V8_HOST_ARCH_64_BIT
Atomic64 Relaxed_Load(volatile const Atomic64* ptr);
Atomic64 Acquire_Load(volatile const Atomic64* ptr);
#endif  // V8_HOST_ARCH_64_BIT

}  // namespace base
}  // namespace v8

#if defined(V8_OS_WIN) || defined(V8_OS_STARBOARD)
#include "src/base/atomicops_internals_std.h"
#else
// TODO(ulan): Switch to std version after performance regression with Wheezy
// sysroot is no longer relevant. Debian Wheezy LTS ends on 31st of May 2018.
#include "src/base/atomicops_internals_portable.h"
#endif

// On some platforms we need additional declarations to make
// AtomicWord compatible with our other Atomic* types.
#if defined(V8_OS_MACOSX) || defined(V8_OS_OPENBSD) || defined(V8_OS_AIX)
#include "src/base/atomicops_internals_atomicword_compat.h"
#endif

#endif  // V8_BASE_ATOMICOPS_H_