| /* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*- |
| * vim: set ts=8 sts=4 et sw=4 tw=99: */ |
| // Copyright 2011 the V8 project authors. All rights reserved. |
| // Redistribution and use in source and binary forms, with or without |
| // modification, are permitted provided that the following conditions are |
| // met: |
| // |
| // * Redistributions of source code must retain the above copyright |
| // notice, this list of conditions and the following disclaimer. |
| // * Redistributions in binary form must reproduce the above |
| // copyright notice, this list of conditions and the following |
| // disclaimer in the documentation and/or other materials provided |
| // with the distribution. |
| // * Neither the name of Google Inc. nor the names of its |
| // contributors may be used to endorse or promote products derived |
| // from this software without specific prior written permission. |
| // |
| // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| // "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| // LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| // A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| // OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| // SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| // LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| // DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| // (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| // OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| |
| #include "jit/mips64/Simulator-mips64.h" |
| |
| #include "mozilla/Casting.h" |
| #include "mozilla/FloatingPoint.h" |
| #include "mozilla/Likely.h" |
| #include "mozilla/MathAlgorithms.h" |
| |
| #include <float.h> |
| |
| #include "asmjs/AsmJSValidate.h" |
| #include "jit/mips64/Assembler-mips64.h" |
| #include "vm/Runtime.h" |
| |
| #define I8(v) static_cast<int8_t>(v) |
| #define I16(v) static_cast<int16_t>(v) |
| #define U16(v) static_cast<uint16_t>(v) |
| #define I32(v) static_cast<int32_t>(v) |
| #define U32(v) static_cast<uint32_t>(v) |
| #define I64(v) static_cast<int64_t>(v) |
| #define U64(v) static_cast<uint64_t>(v) |
| #define I128(v) static_cast<__int128_t>(v) |
| #define U128(v) static_cast<unsigned __int128_t>(v) |
| |
| namespace js { |
| namespace jit { |
| |
| static const Instr kCallRedirInstr = op_special | MAX_BREAK_CODE << FunctionBits | ff_break; |
| |
| // Utils functions. |
| static uint32_t |
| GetFCSRConditionBit(uint32_t cc) |
| { |
| if (cc == 0) |
| return 23; |
| return 24 + cc; |
| } |
| |
| // ----------------------------------------------------------------------------- |
| // MIPS assembly various constants. |
| |
| class SimInstruction |
| { |
| public: |
| enum { |
| kInstrSize = 4, |
| // On MIPS PC cannot actually be directly accessed. We behave as if PC was |
| // always the value of the current instruction being executed. |
| kPCReadOffset = 0 |
| }; |
| |
| // Get the raw instruction bits. |
| inline Instr instructionBits() const { |
| return *reinterpret_cast<const Instr*>(this); |
| } |
| |
| // Set the raw instruction bits to value. |
| inline void setInstructionBits(Instr value) { |
| *reinterpret_cast<Instr*>(this) = value; |
| } |
| |
| // Read one particular bit out of the instruction bits. |
| inline int bit(int nr) const { |
| return (instructionBits() >> nr) & 1; |
| } |
| |
| // Read a bit field out of the instruction bits. |
| inline int bits(int hi, int lo) const { |
| return (instructionBits() >> lo) & ((2 << (hi - lo)) - 1); |
| } |
| |
| // Instruction type. |
| enum Type { |
| kRegisterType, |
| kImmediateType, |
| kJumpType, |
| kUnsupported = -1 |
| }; |
| |
| // Get the encoding type of the instruction. |
| Type instructionType() const; |
| |
| |
| // Accessors for the different named fields used in the MIPS encoding. |
| inline Opcode opcodeValue() const { |
| return static_cast<Opcode>(bits(OpcodeShift + OpcodeBits - 1, OpcodeShift)); |
| } |
| |
| inline int rsValue() const { |
| MOZ_ASSERT(instructionType() == kRegisterType || instructionType() == kImmediateType); |
| return bits(RSShift + RSBits - 1, RSShift); |
| } |
| |
| inline int rtValue() const { |
| MOZ_ASSERT(instructionType() == kRegisterType || instructionType() == kImmediateType); |
| return bits(RTShift + RTBits - 1, RTShift); |
| } |
| |
| inline int rdValue() const { |
| MOZ_ASSERT(instructionType() == kRegisterType); |
| return bits(RDShift + RDBits - 1, RDShift); |
| } |
| |
| inline int saValue() const { |
| MOZ_ASSERT(instructionType() == kRegisterType); |
| return bits(SAShift + SABits - 1, SAShift); |
| } |
| |
| inline int functionValue() const { |
| MOZ_ASSERT(instructionType() == kRegisterType || instructionType() == kImmediateType); |
| return bits(FunctionShift + FunctionBits - 1, FunctionShift); |
| } |
| |
| inline int fdValue() const { |
| return bits(FDShift + FDBits - 1, FDShift); |
| } |
| |
| inline int fsValue() const { |
| return bits(FSShift + FSBits - 1, FSShift); |
| } |
| |
| inline int ftValue() const { |
| return bits(FTShift + FTBits - 1, FTShift); |
| } |
| |
| inline int frValue() const { |
| return bits(FRShift + FRBits - 1, FRShift); |
| } |
| |
| // Float Compare condition code instruction bits. |
| inline int fcccValue() const { |
| return bits(FCccShift + FCccBits - 1, FCccShift); |
| } |
| |
| // Float Branch condition code instruction bits. |
| inline int fbccValue() const { |
| return bits(FBccShift + FBccBits - 1, FBccShift); |
| } |
| |
| // Float Branch true/false instruction bit. |
| inline int fbtrueValue() const { |
| return bits(FBtrueShift + FBtrueBits - 1, FBtrueShift); |
| } |
| |
| // Return the fields at their original place in the instruction encoding. |
| inline Opcode opcodeFieldRaw() const { |
| return static_cast<Opcode>(instructionBits() & OpcodeMask); |
| } |
| |
| inline int rsFieldRaw() const { |
| MOZ_ASSERT(instructionType() == kRegisterType || instructionType() == kImmediateType); |
| return instructionBits() & RSMask; |
| } |
| |
| // Same as above function, but safe to call within instructionType(). |
| inline int rsFieldRawNoAssert() const { |
| return instructionBits() & RSMask; |
| } |
| |
| inline int rtFieldRaw() const { |
| MOZ_ASSERT(instructionType() == kRegisterType || instructionType() == kImmediateType); |
| return instructionBits() & RTMask; |
| } |
| |
| inline int rdFieldRaw() const { |
| MOZ_ASSERT(instructionType() == kRegisterType); |
| return instructionBits() & RDMask; |
| } |
| |
| inline int saFieldRaw() const { |
| MOZ_ASSERT(instructionType() == kRegisterType); |
| return instructionBits() & SAMask; |
| } |
| |
| inline int functionFieldRaw() const { |
| return instructionBits() & FunctionMask; |
| } |
| |
| // Get the secondary field according to the opcode. |
| inline int secondaryValue() const { |
| Opcode op = opcodeFieldRaw(); |
| switch (op) { |
| case op_special: |
| case op_special2: |
| return functionValue(); |
| case op_cop1: |
| return rsValue(); |
| case op_regimm: |
| return rtValue(); |
| default: |
| return ff_null; |
| } |
| } |
| |
| inline int32_t imm16Value() const { |
| MOZ_ASSERT(instructionType() == kImmediateType); |
| return bits(Imm16Shift + Imm16Bits - 1, Imm16Shift); |
| } |
| |
| inline int32_t imm26Value() const { |
| MOZ_ASSERT(instructionType() == kJumpType); |
| return bits(Imm26Shift + Imm26Bits - 1, Imm26Shift); |
| } |
| |
| // Say if the instruction should not be used in a branch delay slot. |
| bool isForbiddenInBranchDelay() const; |
| // Say if the instruction 'links'. e.g. jal, bal. |
| bool isLinkingInstruction() const; |
| // Say if the instruction is a break or a trap. |
| bool isTrap() const; |
| |
| private: |
| |
| SimInstruction() = delete; |
| SimInstruction(const SimInstruction& other) = delete; |
| void operator=(const SimInstruction& other) = delete; |
| }; |
| |
| bool |
| SimInstruction::isForbiddenInBranchDelay() const |
| { |
| const int op = opcodeFieldRaw(); |
| switch (op) { |
| case op_j: |
| case op_jal: |
| case op_beq: |
| case op_bne: |
| case op_blez: |
| case op_bgtz: |
| case op_beql: |
| case op_bnel: |
| case op_blezl: |
| case op_bgtzl: |
| return true; |
| case op_regimm: |
| switch (rtFieldRaw()) { |
| case rt_bltz: |
| case rt_bgez: |
| case rt_bltzal: |
| case rt_bgezal: |
| return true; |
| default: |
| return false; |
| }; |
| break; |
| case op_special: |
| switch (functionFieldRaw()) { |
| case ff_jr: |
| case ff_jalr: |
| return true; |
| default: |
| return false; |
| }; |
| break; |
| default: |
| return false; |
| }; |
| } |
| |
| bool |
| SimInstruction::isLinkingInstruction() const |
| { |
| const int op = opcodeFieldRaw(); |
| switch (op) { |
| case op_jal: |
| return true; |
| case op_regimm: |
| switch (rtFieldRaw()) { |
| case rt_bgezal: |
| case rt_bltzal: |
| return true; |
| default: |
| return false; |
| }; |
| case op_special: |
| switch (functionFieldRaw()) { |
| case ff_jalr: |
| return true; |
| default: |
| return false; |
| }; |
| default: |
| return false; |
| }; |
| } |
| |
| bool |
| SimInstruction::isTrap() const |
| { |
| if (opcodeFieldRaw() != op_special) { |
| return false; |
| } else { |
| switch (functionFieldRaw()) { |
| case ff_break: |
| case ff_tge: |
| case ff_tgeu: |
| case ff_tlt: |
| case ff_tltu: |
| case ff_teq: |
| case ff_tne: |
| return true; |
| default: |
| return false; |
| }; |
| } |
| } |
| |
| SimInstruction::Type |
| SimInstruction::instructionType() const |
| { |
| switch (opcodeFieldRaw()) { |
| case op_special: |
| switch (functionFieldRaw()) { |
| case ff_jr: |
| case ff_jalr: |
| case ff_sync: |
| case ff_break: |
| case ff_sll: |
| case ff_dsll: |
| case ff_dsll32: |
| case ff_srl: |
| case ff_dsrl: |
| case ff_dsrl32: |
| case ff_sra: |
| case ff_dsra: |
| case ff_dsra32: |
| case ff_sllv: |
| case ff_dsllv: |
| case ff_srlv: |
| case ff_dsrlv: |
| case ff_srav: |
| case ff_dsrav: |
| case ff_mfhi: |
| case ff_mflo: |
| case ff_mult: |
| case ff_dmult: |
| case ff_multu: |
| case ff_dmultu: |
| case ff_div: |
| case ff_ddiv: |
| case ff_divu: |
| case ff_ddivu: |
| case ff_add: |
| case ff_dadd: |
| case ff_addu: |
| case ff_daddu: |
| case ff_sub: |
| case ff_dsub: |
| case ff_subu: |
| case ff_dsubu: |
| case ff_and: |
| case ff_or: |
| case ff_xor: |
| case ff_nor: |
| case ff_slt: |
| case ff_sltu: |
| case ff_tge: |
| case ff_tgeu: |
| case ff_tlt: |
| case ff_tltu: |
| case ff_teq: |
| case ff_tne: |
| case ff_movz: |
| case ff_movn: |
| case ff_movci: |
| return kRegisterType; |
| default: |
| return kUnsupported; |
| }; |
| break; |
| case op_special2: |
| switch (functionFieldRaw()) { |
| case ff_mul: |
| case ff_clz: |
| case ff_dclz: |
| return kRegisterType; |
| default: |
| return kUnsupported; |
| }; |
| break; |
| case op_special3: |
| switch (functionFieldRaw()) { |
| case ff_ins: |
| case ff_dins: |
| case ff_dinsm: |
| case ff_dinsu: |
| case ff_ext: |
| case ff_dext: |
| case ff_dextm: |
| case ff_dextu: |
| case ff_bshfl: |
| return kRegisterType; |
| default: |
| return kUnsupported; |
| }; |
| break; |
| case op_cop1: // Coprocessor instructions. |
| switch (rsFieldRawNoAssert()) { |
| case rs_bc1: // Branch on coprocessor condition. |
| return kImmediateType; |
| default: |
| return kRegisterType; |
| }; |
| break; |
| case op_cop1x: |
| return kRegisterType; |
| // 16 bits Immediate type instructions. e.g.: addi dest, src, imm16. |
| case op_regimm: |
| case op_beq: |
| case op_bne: |
| case op_blez: |
| case op_bgtz: |
| case op_addi: |
| case op_daddi: |
| case op_addiu: |
| case op_daddiu: |
| case op_slti: |
| case op_sltiu: |
| case op_andi: |
| case op_ori: |
| case op_xori: |
| case op_lui: |
| case op_beql: |
| case op_bnel: |
| case op_blezl: |
| case op_bgtzl: |
| case op_lb: |
| case op_lbu: |
| case op_lh: |
| case op_lhu: |
| case op_lw: |
| case op_lwu: |
| case op_lwl: |
| case op_lwr: |
| case op_ll: |
| case op_ld: |
| case op_ldl: |
| case op_ldr: |
| case op_sb: |
| case op_sh: |
| case op_sw: |
| case op_swl: |
| case op_swr: |
| case op_sc: |
| case op_sd: |
| case op_sdl: |
| case op_sdr: |
| case op_lwc1: |
| case op_ldc1: |
| case op_swc1: |
| case op_sdc1: |
| return kImmediateType; |
| // 26 bits immediate type instructions. e.g.: j imm26. |
| case op_j: |
| case op_jal: |
| return kJumpType; |
| default: |
| return kUnsupported; |
| }; |
| return kUnsupported; |
| } |
| |
| // C/C++ argument slots size. |
| const int kCArgSlotCount = 0; |
| const int kCArgsSlotsSize = kCArgSlotCount * sizeof(uintptr_t); |
| const int kBranchReturnOffset = 2 * SimInstruction::kInstrSize; |
| |
| class CachePage { |
| public: |
| static const int LINE_VALID = 0; |
| static const int LINE_INVALID = 1; |
| |
| static const int kPageShift = 12; |
| static const int kPageSize = 1 << kPageShift; |
| static const int kPageMask = kPageSize - 1; |
| static const int kLineShift = 2; // The cache line is only 4 bytes right now. |
| static const int kLineLength = 1 << kLineShift; |
| static const int kLineMask = kLineLength - 1; |
| |
| CachePage() { |
| memset(&validity_map_, LINE_INVALID, sizeof(validity_map_)); |
| } |
| |
| char* validityByte(int offset) { |
| return &validity_map_[offset >> kLineShift]; |
| } |
| |
| char* cachedData(int offset) { |
| return &data_[offset]; |
| } |
| |
| private: |
| char data_[kPageSize]; // The cached data. |
| static const int kValidityMapSize = kPageSize >> kLineShift; |
| char validity_map_[kValidityMapSize]; // One byte per line. |
| }; |
| |
| // Protects the icache() and redirection() properties of the |
| // Simulator. |
| class AutoLockSimulatorCache |
| { |
| public: |
| explicit AutoLockSimulatorCache(Simulator* sim) : sim_(sim) { |
| PR_Lock(sim_->cacheLock_); |
| MOZ_ASSERT(!sim_->cacheLockHolder_); |
| #ifdef DEBUG |
| sim_->cacheLockHolder_ = PR_GetCurrentThread(); |
| #endif |
| } |
| |
| ~AutoLockSimulatorCache() { |
| MOZ_ASSERT(sim_->cacheLockHolder_); |
| #ifdef DEBUG |
| sim_->cacheLockHolder_ = nullptr; |
| #endif |
| PR_Unlock(sim_->cacheLock_); |
| } |
| |
| private: |
| Simulator* const sim_; |
| }; |
| |
| bool Simulator::ICacheCheckingEnabled = false; |
| |
| int64_t Simulator::StopSimAt = -1; |
| |
| Simulator * |
| Simulator::Create() |
| { |
| Simulator* sim = js_new<Simulator>(); |
| if (!sim) |
| return nullptr; |
| |
| if (!sim->init()) { |
| js_delete(sim); |
| return nullptr; |
| } |
| |
| if (js_sb_getenv("MIPS_SIM_ICACHE_CHECKS")) |
| Simulator::ICacheCheckingEnabled = true; |
| |
| int64_t stopAt; |
| char* stopAtStr = js_sb_getenv("MIPS_SIM_STOP_AT"); |
| if (stopAtStr && sscanf(stopAtStr, "%ld", &stopAt) == 1) { |
| fprintf(stderr, "\nStopping simulation at icount %ld\n", stopAt); |
| Simulator::StopSimAt = stopAt; |
| } |
| |
| return sim; |
| } |
| |
| void |
| Simulator::Destroy(Simulator* sim) |
| { |
| js_delete(sim); |
| } |
| |
| // The MipsDebugger class is used by the simulator while debugging simulated |
| // code. |
| class MipsDebugger |
| { |
| public: |
| explicit MipsDebugger(Simulator* sim) : sim_(sim) { } |
| |
| void stop(SimInstruction* instr); |
| void debug(); |
| // Print all registers with a nice formatting. |
| void printAllRegs(); |
| void printAllRegsIncludingFPU(); |
| |
| private: |
| // We set the breakpoint code to 0xfffff to easily recognize it. |
| static const Instr kBreakpointInstr = op_special | ff_break | 0xfffff << 6; |
| static const Instr kNopInstr = op_special | ff_sll; |
| |
| Simulator* sim_; |
| |
| int64_t getRegisterValue(int regnum); |
| int64_t getFPURegisterValueLong(int regnum); |
| float getFPURegisterValueFloat(int regnum); |
| double getFPURegisterValueDouble(int regnum); |
| bool getValue(const char* desc, int64_t* value); |
| |
| // Set or delete a breakpoint. Returns true if successful. |
| bool setBreakpoint(SimInstruction* breakpc); |
| bool deleteBreakpoint(SimInstruction* breakpc); |
| |
| // Undo and redo all breakpoints. This is needed to bracket disassembly and |
| // execution to skip past breakpoints when run from the debugger. |
| void undoBreakpoints(); |
| void redoBreakpoints(); |
| }; |
| |
| static void |
| UNSUPPORTED() |
| { |
| printf("Unsupported instruction.\n"); |
| MOZ_CRASH(); |
| } |
| |
| void |
| MipsDebugger::stop(SimInstruction* instr) |
| { |
| // Get the stop code. |
| uint32_t code = instr->bits(25, 6); |
| // Retrieve the encoded address, which comes just after this stop. |
| char* msg = *reinterpret_cast<char**>(sim_->get_pc() + |
| SimInstruction::kInstrSize); |
| // Update this stop description. |
| if (!sim_->watchedStops_[code].desc_) |
| sim_->watchedStops_[code].desc_ = msg; |
| // Print the stop message and code if it is not the default code. |
| if (code != kMaxStopCode) |
| printf("Simulator hit stop %u: %s\n", code, msg); |
| else |
| printf("Simulator hit %s\n", msg); |
| sim_->set_pc(sim_->get_pc() + 2 * SimInstruction::kInstrSize); |
| debug(); |
| } |
| |
| int64_t |
| MipsDebugger::getRegisterValue(int regnum) |
| { |
| if (regnum == kPCRegister) |
| return sim_->get_pc(); |
| return sim_->getRegister(regnum); |
| } |
| |
| int64_t |
| MipsDebugger::getFPURegisterValueLong(int regnum) |
| { |
| return sim_->getFpuRegister(regnum); |
| } |
| |
| float |
| MipsDebugger::getFPURegisterValueFloat(int regnum) |
| { |
| return sim_->getFpuRegisterFloat(regnum); |
| } |
| |
| double |
| MipsDebugger::getFPURegisterValueDouble(int regnum) |
| { |
| return sim_->getFpuRegisterDouble(regnum); |
| } |
| |
| bool |
| MipsDebugger::getValue(const char* desc, int64_t* value) |
| { |
| Register reg = Register::FromName(desc); |
| if (reg != InvalidReg) { |
| *value = getRegisterValue(reg.code()); |
| return true; |
| } |
| |
| if (strncmp(desc, "0x", 2) == 0) |
| return sscanf(desc, "%lx", reinterpret_cast<uint64_t*>(value)) == 1; |
| return sscanf(desc, "%li", value) == 1; |
| } |
| |
| bool |
| MipsDebugger::setBreakpoint(SimInstruction* breakpc) |
| { |
| // Check if a breakpoint can be set. If not return without any side-effects. |
| if (sim_->break_pc_ != nullptr) |
| return false; |
| |
| // Set the breakpoint. |
| sim_->break_pc_ = breakpc; |
| sim_->break_instr_ = breakpc->instructionBits(); |
| // Not setting the breakpoint instruction in the code itself. It will be set |
| // when the debugger shell continues. |
| return true; |
| |
| } |
| |
| bool |
| MipsDebugger::deleteBreakpoint(SimInstruction* breakpc) |
| { |
| if (sim_->break_pc_ != nullptr) |
| sim_->break_pc_->setInstructionBits(sim_->break_instr_); |
| |
| sim_->break_pc_ = nullptr; |
| sim_->break_instr_ = 0; |
| return true; |
| } |
| |
| void |
| MipsDebugger::undoBreakpoints() |
| { |
| if (sim_->break_pc_) |
| sim_->break_pc_->setInstructionBits(sim_->break_instr_); |
| } |
| |
| void |
| MipsDebugger::redoBreakpoints() |
| { |
| if (sim_->break_pc_) |
| sim_->break_pc_->setInstructionBits(kBreakpointInstr); |
| } |
| |
| void |
| MipsDebugger::printAllRegs() |
| { |
| int64_t value; |
| for (uint32_t i = 0; i < Registers::Total; i++) { |
| value = getRegisterValue(i); |
| printf("%3s: 0x%016lx %20ld ", Registers::GetName(i), value, value); |
| |
| if (i % 2) |
| printf("\n"); |
| } |
| printf("\n"); |
| |
| value = getRegisterValue(Simulator::LO); |
| printf(" LO: 0x%016lx %20ld ", value, value); |
| value = getRegisterValue(Simulator::HI); |
| printf(" HI: 0x%016lx %20ld\n", value, value); |
| value = getRegisterValue(Simulator::pc); |
| printf(" pc: 0x%016lx\n", value); |
| } |
| |
| void |
| MipsDebugger::printAllRegsIncludingFPU() |
| { |
| printAllRegs(); |
| |
| printf("\n\n"); |
| // f0, f1, f2, ... f31. |
| for (uint32_t i = 0; i < FloatRegisters::TotalPhys; i++) { |
| printf("%3s: 0x%016lx\tflt: %-8.4g\tdbl: %-16.4g\n", |
| FloatRegisters::GetName(i), |
| getFPURegisterValueLong(i), |
| getFPURegisterValueFloat(i), |
| getFPURegisterValueDouble(i)); |
| } |
| } |
| |
| static char* |
| ReadLine(const char* prompt) |
| { |
| char* result = nullptr; |
| char lineBuf[256]; |
| int offset = 0; |
| bool keepGoing = true; |
| fprintf(stdout, "%s", prompt); |
| fflush(stdout); |
| while (keepGoing) { |
| if (fgets(lineBuf, sizeof(lineBuf), stdin) == nullptr) { |
| // fgets got an error. Just give up. |
| if (result) |
| js_delete(result); |
| return nullptr; |
| } |
| int len = strlen(lineBuf); |
| if (len > 0 && lineBuf[len - 1] == '\n') { |
| // Since we read a new line we are done reading the line. This |
| // will exit the loop after copying this buffer into the result. |
| keepGoing = false; |
| } |
| if (!result) { |
| // Allocate the initial result and make room for the terminating '\0' |
| result = (char*)js_malloc(len + 1); |
| if (!result) |
| return nullptr; |
| } else { |
| // Allocate a new result with enough room for the new addition. |
| int new_len = offset + len + 1; |
| char* new_result = (char*)js_malloc(new_len); |
| if (!new_result) |
| return nullptr; |
| // Copy the existing input into the new array and set the new |
| // array as the result. |
| memcpy(new_result, result, offset * sizeof(char)); |
| js_free(result); |
| result = new_result; |
| } |
| // Copy the newly read line into the result. |
| memcpy(result + offset, lineBuf, len * sizeof(char)); |
| offset += len; |
| } |
| |
| MOZ_ASSERT(result); |
| result[offset] = '\0'; |
| return result; |
| } |
| |
| static void |
| DisassembleInstruction(uint64_t pc) |
| { |
| uint8_t* bytes = reinterpret_cast<uint8_t*>(pc); |
| char hexbytes[256]; |
| sprintf(hexbytes, "0x%x 0x%x 0x%x 0x%x", bytes[0], bytes[1], bytes[2], bytes[3]); |
| char llvmcmd[1024]; |
| sprintf(llvmcmd, "bash -c \"echo -n '%p'; echo '%s' | " |
| "llvm-mc -disassemble -arch=mips64el -mcpu=mips64r2 | " |
| "grep -v pure_instructions | grep -v .text\"", static_cast<void*>(bytes), hexbytes); |
| if (system(llvmcmd)) |
| printf("Cannot disassemble instruction.\n"); |
| } |
| |
| void |
| MipsDebugger::debug() |
| { |
| intptr_t lastPC = -1; |
| bool done = false; |
| |
| #define COMMAND_SIZE 63 |
| #define ARG_SIZE 255 |
| |
| #define STR(a) #a |
| #define XSTR(a) STR(a) |
| |
| char cmd[COMMAND_SIZE + 1]; |
| char arg1[ARG_SIZE + 1]; |
| char arg2[ARG_SIZE + 1]; |
| char* argv[3] = { cmd, arg1, arg2 }; |
| |
| // Make sure to have a proper terminating character if reaching the limit. |
| cmd[COMMAND_SIZE] = 0; |
| arg1[ARG_SIZE] = 0; |
| arg2[ARG_SIZE] = 0; |
| |
| // Undo all set breakpoints while running in the debugger shell. This will |
| // make them invisible to all commands. |
| undoBreakpoints(); |
| |
| while (!done && (sim_->get_pc() != Simulator::end_sim_pc)) { |
| if (lastPC != sim_->get_pc()) { |
| DisassembleInstruction(sim_->get_pc()); |
| lastPC = sim_->get_pc(); |
| } |
| char* line = ReadLine("sim> "); |
| if (line == nullptr) { |
| break; |
| } else { |
| char* last_input = sim_->lastDebuggerInput(); |
| if (strcmp(line, "\n") == 0 && last_input != nullptr) { |
| line = last_input; |
| } else { |
| // Ownership is transferred to sim_; |
| sim_->setLastDebuggerInput(line); |
| } |
| // Use sscanf to parse the individual parts of the command line. At the |
| // moment no command expects more than two parameters. |
| int argc = sscanf(line, |
| "%" XSTR(COMMAND_SIZE) "s " |
| "%" XSTR(ARG_SIZE) "s " |
| "%" XSTR(ARG_SIZE) "s", |
| cmd, arg1, arg2); |
| if ((strcmp(cmd, "si") == 0) || (strcmp(cmd, "stepi") == 0)) { |
| SimInstruction* instr = reinterpret_cast<SimInstruction*>(sim_->get_pc()); |
| if (!(instr->isTrap()) || |
| instr->instructionBits() == kCallRedirInstr) { |
| sim_->instructionDecode( |
| reinterpret_cast<SimInstruction*>(sim_->get_pc())); |
| } else { |
| // Allow si to jump over generated breakpoints. |
| printf("/!\\ Jumping over generated breakpoint.\n"); |
| sim_->set_pc(sim_->get_pc() + SimInstruction::kInstrSize); |
| } |
| } else if ((strcmp(cmd, "c") == 0) || (strcmp(cmd, "cont") == 0)) { |
| // Execute the one instruction we broke at with breakpoints disabled. |
| sim_->instructionDecode(reinterpret_cast<SimInstruction*>(sim_->get_pc())); |
| // Leave the debugger shell. |
| done = true; |
| } else if ((strcmp(cmd, "p") == 0) || (strcmp(cmd, "print") == 0)) { |
| if (argc == 2) { |
| int64_t value; |
| if (strcmp(arg1, "all") == 0) { |
| printAllRegs(); |
| } else if (strcmp(arg1, "allf") == 0) { |
| printAllRegsIncludingFPU(); |
| } else { |
| Register reg = Register::FromName(arg1); |
| FloatRegisters::Encoding fReg = FloatRegisters::FromName(arg1); |
| if (reg != InvalidReg) { |
| value = getRegisterValue(reg.code()); |
| printf("%s: 0x%016lx %20ld \n", arg1, value, value); |
| } else if (fReg != FloatRegisters::Invalid) { |
| printf("%3s: 0x%016lx\tflt: %-8.4g\tdbl: %-16.4g\n", |
| FloatRegisters::GetName(fReg), |
| getFPURegisterValueLong(fReg), |
| getFPURegisterValueFloat(fReg), |
| getFPURegisterValueDouble(fReg)); |
| } else { |
| printf("%s unrecognized\n", arg1); |
| } |
| } |
| } else { |
| printf("print <register> or print <fpu register> single\n"); |
| } |
| } else if (strcmp(cmd, "stack") == 0 || strcmp(cmd, "mem") == 0) { |
| int64_t* cur = nullptr; |
| int64_t* end = nullptr; |
| int next_arg = 1; |
| |
| if (strcmp(cmd, "stack") == 0) { |
| cur = reinterpret_cast<int64_t*>(sim_->getRegister(Simulator::sp)); |
| } else { // Command "mem". |
| int64_t value; |
| if (!getValue(arg1, &value)) { |
| printf("%s unrecognized\n", arg1); |
| continue; |
| } |
| cur = reinterpret_cast<int64_t*>(value); |
| next_arg++; |
| } |
| |
| int64_t words; |
| if (argc == next_arg) { |
| words = 10; |
| } else { |
| if (!getValue(argv[next_arg], &words)) { |
| words = 10; |
| } |
| } |
| end = cur + words; |
| |
| while (cur < end) { |
| printf(" %p: 0x%016lx %20ld", cur, *cur, *cur); |
| printf("\n"); |
| cur++; |
| } |
| |
| } else if ((strcmp(cmd, "disasm") == 0) || |
| (strcmp(cmd, "dpc") == 0) || |
| (strcmp(cmd, "di") == 0)) { |
| uint8_t* cur = nullptr; |
| uint8_t* end = nullptr; |
| |
| if (argc == 1) { |
| cur = reinterpret_cast<uint8_t*>(sim_->get_pc()); |
| end = cur + (10 * SimInstruction::kInstrSize); |
| } else if (argc == 2) { |
| Register reg = Register::FromName(arg1); |
| if (reg != InvalidReg || strncmp(arg1, "0x", 2) == 0) { |
| // The argument is an address or a register name. |
| int64_t value; |
| if (getValue(arg1, &value)) { |
| cur = reinterpret_cast<uint8_t*>(value); |
| // Disassemble 10 instructions at <arg1>. |
| end = cur + (10 * SimInstruction::kInstrSize); |
| } |
| } else { |
| // The argument is the number of instructions. |
| int64_t value; |
| if (getValue(arg1, &value)) { |
| cur = reinterpret_cast<uint8_t*>(sim_->get_pc()); |
| // Disassemble <arg1> instructions. |
| end = cur + (value * SimInstruction::kInstrSize); |
| } |
| } |
| } else { |
| int64_t value1; |
| int64_t value2; |
| if (getValue(arg1, &value1) && getValue(arg2, &value2)) { |
| cur = reinterpret_cast<uint8_t*>(value1); |
| end = cur + (value2 * SimInstruction::kInstrSize); |
| } |
| } |
| |
| while (cur < end) { |
| DisassembleInstruction(uint64_t(cur)); |
| cur += SimInstruction::kInstrSize; |
| } |
| } else if (strcmp(cmd, "gdb") == 0) { |
| printf("relinquishing control to gdb\n"); |
| asm("int $3"); |
| printf("regaining control from gdb\n"); |
| } else if (strcmp(cmd, "break") == 0) { |
| if (argc == 2) { |
| int64_t value; |
| if (getValue(arg1, &value)) { |
| if (!setBreakpoint(reinterpret_cast<SimInstruction*>(value))) |
| printf("setting breakpoint failed\n"); |
| } else { |
| printf("%s unrecognized\n", arg1); |
| } |
| } else { |
| printf("break <address>\n"); |
| } |
| } else if (strcmp(cmd, "del") == 0) { |
| if (!deleteBreakpoint(nullptr)) { |
| printf("deleting breakpoint failed\n"); |
| } |
| } else if (strcmp(cmd, "flags") == 0) { |
| printf("No flags on MIPS !\n"); |
| } else if (strcmp(cmd, "stop") == 0) { |
| int64_t value; |
| intptr_t stop_pc = sim_->get_pc() - |
| 2 * SimInstruction::kInstrSize; |
| SimInstruction* stop_instr = reinterpret_cast<SimInstruction*>(stop_pc); |
| SimInstruction* msg_address = |
| reinterpret_cast<SimInstruction*>(stop_pc + |
| SimInstruction::kInstrSize); |
| if ((argc == 2) && (strcmp(arg1, "unstop") == 0)) { |
| // Remove the current stop. |
| if (sim_->isStopInstruction(stop_instr)) { |
| stop_instr->setInstructionBits(kNopInstr); |
| msg_address->setInstructionBits(kNopInstr); |
| } else { |
| printf("Not at debugger stop.\n"); |
| } |
| } else if (argc == 3) { |
| // Print information about all/the specified breakpoint(s). |
| if (strcmp(arg1, "info") == 0) { |
| if (strcmp(arg2, "all") == 0) { |
| printf("Stop information:\n"); |
| for (uint32_t i = kMaxWatchpointCode + 1; |
| i <= kMaxStopCode; |
| i++) { |
| sim_->printStopInfo(i); |
| } |
| } else if (getValue(arg2, &value)) { |
| sim_->printStopInfo(value); |
| } else { |
| printf("Unrecognized argument.\n"); |
| } |
| } else if (strcmp(arg1, "enable") == 0) { |
| // Enable all/the specified breakpoint(s). |
| if (strcmp(arg2, "all") == 0) { |
| for (uint32_t i = kMaxWatchpointCode + 1; |
| i <= kMaxStopCode; |
| i++) { |
| sim_->enableStop(i); |
| } |
| } else if (getValue(arg2, &value)) { |
| sim_->enableStop(value); |
| } else { |
| printf("Unrecognized argument.\n"); |
| } |
| } else if (strcmp(arg1, "disable") == 0) { |
| // Disable all/the specified breakpoint(s). |
| if (strcmp(arg2, "all") == 0) { |
| for (uint32_t i = kMaxWatchpointCode + 1; |
| i <= kMaxStopCode; |
| i++) { |
| sim_->disableStop(i); |
| } |
| } else if (getValue(arg2, &value)) { |
| sim_->disableStop(value); |
| } else { |
| printf("Unrecognized argument.\n"); |
| } |
| } |
| } else { |
| printf("Wrong usage. Use help command for more information.\n"); |
| } |
| } else if ((strcmp(cmd, "h") == 0) || (strcmp(cmd, "help") == 0)) { |
| printf("cont\n"); |
| printf(" continue execution (alias 'c')\n"); |
| printf("stepi\n"); |
| printf(" step one instruction (alias 'si')\n"); |
| printf("print <register>\n"); |
| printf(" print register content (alias 'p')\n"); |
| printf(" use register name 'all' to print all registers\n"); |
| printf("printobject <register>\n"); |
| printf(" print an object from a register (alias 'po')\n"); |
| printf("stack [<words>]\n"); |
| printf(" dump stack content, default dump 10 words)\n"); |
| printf("mem <address> [<words>]\n"); |
| printf(" dump memory content, default dump 10 words)\n"); |
| printf("flags\n"); |
| printf(" print flags\n"); |
| printf("disasm [<instructions>]\n"); |
| printf("disasm [<address/register>]\n"); |
| printf("disasm [[<address/register>] <instructions>]\n"); |
| printf(" disassemble code, default is 10 instructions\n"); |
| printf(" from pc (alias 'di')\n"); |
| printf("gdb\n"); |
| printf(" enter gdb\n"); |
| printf("break <address>\n"); |
| printf(" set a break point on the address\n"); |
| printf("del\n"); |
| printf(" delete the breakpoint\n"); |
| printf("stop feature:\n"); |
| printf(" Description:\n"); |
| printf(" Stops are debug instructions inserted by\n"); |
| printf(" the Assembler::stop() function.\n"); |
| printf(" When hitting a stop, the Simulator will\n"); |
| printf(" stop and and give control to the Debugger.\n"); |
| printf(" All stop codes are watched:\n"); |
| printf(" - They can be enabled / disabled: the Simulator\n"); |
| printf(" will / won't stop when hitting them.\n"); |
| printf(" - The Simulator keeps track of how many times they \n"); |
| printf(" are met. (See the info command.) Going over a\n"); |
| printf(" disabled stop still increases its counter. \n"); |
| printf(" Commands:\n"); |
| printf(" stop info all/<code> : print infos about number <code>\n"); |
| printf(" or all stop(s).\n"); |
| printf(" stop enable/disable all/<code> : enables / disables\n"); |
| printf(" all or number <code> stop(s)\n"); |
| printf(" stop unstop\n"); |
| printf(" ignore the stop instruction at the current location\n"); |
| printf(" from now on\n"); |
| } else { |
| printf("Unknown command: %s\n", cmd); |
| } |
| } |
| } |
| |
| // Add all the breakpoints back to stop execution and enter the debugger |
| // shell when hit. |
| redoBreakpoints(); |
| |
| #undef COMMAND_SIZE |
| #undef ARG_SIZE |
| |
| #undef STR |
| #undef XSTR |
| } |
| |
| static bool |
| AllOnOnePage(uintptr_t start, int size) |
| { |
| intptr_t start_page = (start & ~CachePage::kPageMask); |
| intptr_t end_page = ((start + size) & ~CachePage::kPageMask); |
| return start_page == end_page; |
| } |
| |
| void |
| Simulator::setLastDebuggerInput(char* input) |
| { |
| js_free(lastDebuggerInput_); |
| lastDebuggerInput_ = input; |
| } |
| |
| static CachePage* |
| GetCachePageLocked(Simulator::ICacheMap& i_cache, void* page) |
| { |
| Simulator::ICacheMap::AddPtr p = i_cache.lookupForAdd(page); |
| if (p) |
| return p->value(); |
| |
| CachePage* new_page = js_new<CachePage>(); |
| if (!i_cache.add(p, page, new_page)) |
| return nullptr; |
| return new_page; |
| } |
| |
| // Flush from start up to and not including start + size. |
| static void |
| FlushOnePageLocked(Simulator::ICacheMap& i_cache, intptr_t start, int size) |
| { |
| MOZ_ASSERT(size <= CachePage::kPageSize); |
| MOZ_ASSERT(AllOnOnePage(start, size - 1)); |
| MOZ_ASSERT((start & CachePage::kLineMask) == 0); |
| MOZ_ASSERT((size & CachePage::kLineMask) == 0); |
| void* page = reinterpret_cast<void*>(start & (~CachePage::kPageMask)); |
| int offset = (start & CachePage::kPageMask); |
| CachePage* cache_page = GetCachePageLocked(i_cache, page); |
| char* valid_bytemap = cache_page->validityByte(offset); |
| memset(valid_bytemap, CachePage::LINE_INVALID, size >> CachePage::kLineShift); |
| } |
| |
| static void |
| FlushICacheLocked(Simulator::ICacheMap& i_cache, void* start_addr, size_t size) |
| { |
| intptr_t start = reinterpret_cast<intptr_t>(start_addr); |
| int intra_line = (start & CachePage::kLineMask); |
| start -= intra_line; |
| size += intra_line; |
| size = ((size - 1) | CachePage::kLineMask) + 1; |
| int offset = (start & CachePage::kPageMask); |
| while (!AllOnOnePage(start, size - 1)) { |
| int bytes_to_flush = CachePage::kPageSize - offset; |
| FlushOnePageLocked(i_cache, start, bytes_to_flush); |
| start += bytes_to_flush; |
| size -= bytes_to_flush; |
| MOZ_ASSERT((start & CachePage::kPageMask) == 0); |
| offset = 0; |
| } |
| if (size != 0) |
| FlushOnePageLocked(i_cache, start, size); |
| } |
| |
| static void |
| CheckICacheLocked(Simulator::ICacheMap& i_cache, SimInstruction* instr) |
| { |
| intptr_t address = reinterpret_cast<intptr_t>(instr); |
| void* page = reinterpret_cast<void*>(address & (~CachePage::kPageMask)); |
| void* line = reinterpret_cast<void*>(address & (~CachePage::kLineMask)); |
| int offset = (address & CachePage::kPageMask); |
| CachePage* cache_page = GetCachePageLocked(i_cache, page); |
| char* cache_valid_byte = cache_page->validityByte(offset); |
| bool cache_hit = (*cache_valid_byte == CachePage::LINE_VALID); |
| char* cached_line = cache_page->cachedData(offset & ~CachePage::kLineMask); |
| if (cache_hit) { |
| // Check that the data in memory matches the contents of the I-cache. |
| MOZ_ASSERT(memcmp(reinterpret_cast<void*>(instr), |
| cache_page->cachedData(offset), |
| SimInstruction::kInstrSize) == 0); |
| } else { |
| // Cache miss. Load memory into the cache. |
| memcpy(cached_line, line, CachePage::kLineLength); |
| *cache_valid_byte = CachePage::LINE_VALID; |
| } |
| } |
| |
| HashNumber |
| Simulator::ICacheHasher::hash(const Lookup& l) |
| { |
| return U32(reinterpret_cast<uintptr_t>(l)) >> 2; |
| } |
| |
| bool |
| Simulator::ICacheHasher::match(const Key& k, const Lookup& l) |
| { |
| MOZ_ASSERT((reinterpret_cast<intptr_t>(k) & CachePage::kPageMask) == 0); |
| MOZ_ASSERT((reinterpret_cast<intptr_t>(l) & CachePage::kPageMask) == 0); |
| return k == l; |
| } |
| |
| void |
| Simulator::FlushICache(void* start_addr, size_t size) |
| { |
| if (Simulator::ICacheCheckingEnabled) { |
| Simulator* sim = Simulator::Current(); |
| AutoLockSimulatorCache als(sim); |
| js::jit::FlushICacheLocked(sim->icache(), start_addr, size); |
| } |
| } |
| |
| Simulator::Simulator() |
| { |
| // Set up simulator support first. Some of this information is needed to |
| // setup the architecture state. |
| |
| // Note, allocation and anything that depends on allocated memory is |
| // deferred until init(), in order to handle OOM properly. |
| |
| stack_ = nullptr; |
| stackLimit_ = 0; |
| pc_modified_ = false; |
| icount_ = 0; |
| break_count_ = 0; |
| resume_pc_ = 0; |
| break_pc_ = nullptr; |
| break_instr_ = 0; |
| single_stepping_ = false; |
| single_step_callback_ = nullptr; |
| single_step_callback_arg_ = nullptr; |
| |
| // Set up architecture state. |
| // All registers are initialized to zero to start with. |
| for (int i = 0; i < Register::kNumSimuRegisters; i++) |
| registers_[i] = 0; |
| for (int i = 0; i < Simulator::FPURegister::kNumFPURegisters; i++) |
| FPUregisters_[i] = 0; |
| FCSR_ = 0; |
| |
| // The ra and pc are initialized to a known bad value that will cause an |
| // access violation if the simulator ever tries to execute it. |
| registers_[pc] = bad_ra; |
| registers_[ra] = bad_ra; |
| |
| for (int i = 0; i < kNumExceptions; i++) |
| exceptions[i] = 0; |
| |
| lastDebuggerInput_ = nullptr; |
| |
| cacheLock_ = nullptr; |
| #ifdef DEBUG |
| cacheLockHolder_ = nullptr; |
| #endif |
| redirection_ = nullptr; |
| } |
| |
| bool |
| Simulator::init() |
| { |
| cacheLock_ = PR_NewLock(); |
| if (!cacheLock_) |
| return false; |
| |
| if (!icache_.init()) |
| return false; |
| |
| // Allocate 2MB for the stack. Note that we will only use 1MB, see below. |
| static const size_t stackSize = 2 * 1024 * 1024; |
| stack_ = static_cast<char*>(js_malloc(stackSize)); |
| if (!stack_) |
| return false; |
| |
| // Leave a safety margin of 1MB to prevent overrunning the stack when |
| // pushing values (total stack size is 2MB). |
| stackLimit_ = reinterpret_cast<uintptr_t>(stack_) + 1024 * 1024; |
| |
| // The sp is initialized to point to the bottom (high address) of the |
| // allocated stack area. To be safe in potential stack underflows we leave |
| // some buffer below. |
| registers_[sp] = reinterpret_cast<int64_t>(stack_) + stackSize - 64; |
| |
| return true; |
| } |
| |
| // When the generated code calls an external reference we need to catch that in |
| // the simulator. The external reference will be a function compiled for the |
| // host architecture. We need to call that function instead of trying to |
| // execute it with the simulator. We do that by redirecting the external |
| // reference to a swi (software-interrupt) instruction that is handled by |
| // the simulator. We write the original destination of the jump just at a known |
| // offset from the swi instruction so the simulator knows what to call. |
| class Redirection |
| { |
| friend class Simulator; |
| |
| // sim's lock must already be held. |
| Redirection(void* nativeFunction, ABIFunctionType type, Simulator* sim) |
| : nativeFunction_(nativeFunction), |
| swiInstruction_(kCallRedirInstr), |
| type_(type), |
| next_(nullptr) |
| { |
| next_ = sim->redirection(); |
| if (Simulator::ICacheCheckingEnabled) |
| FlushICacheLocked(sim->icache(), addressOfSwiInstruction(), SimInstruction::kInstrSize); |
| sim->setRedirection(this); |
| } |
| |
| public: |
| void* addressOfSwiInstruction() { return &swiInstruction_; } |
| void* nativeFunction() const { return nativeFunction_; } |
| ABIFunctionType type() const { return type_; } |
| |
| static Redirection* Get(void* nativeFunction, ABIFunctionType type) { |
| Simulator* sim = Simulator::Current(); |
| |
| AutoLockSimulatorCache als(sim); |
| |
| Redirection* current = sim->redirection(); |
| for (; current != nullptr; current = current->next_) { |
| if (current->nativeFunction_ == nativeFunction) { |
| MOZ_ASSERT(current->type() == type); |
| return current; |
| } |
| } |
| |
| Redirection* redir = (Redirection*)js_malloc(sizeof(Redirection)); |
| if (!redir) { |
| MOZ_ReportAssertionFailure("[unhandlable oom] Simulator redirection", |
| __FILE__, __LINE__); |
| MOZ_CRASH(); |
| } |
| new(redir) Redirection(nativeFunction, type, sim); |
| return redir; |
| } |
| |
| static Redirection* FromSwiInstruction(SimInstruction* swiInstruction) { |
| uint8_t* addrOfSwi = reinterpret_cast<uint8_t*>(swiInstruction); |
| uint8_t* addrOfRedirection = addrOfSwi - offsetof(Redirection, swiInstruction_); |
| return reinterpret_cast<Redirection*>(addrOfRedirection); |
| } |
| |
| private: |
| void* nativeFunction_; |
| uint32_t swiInstruction_; |
| ABIFunctionType type_; |
| Redirection* next_; |
| }; |
| |
| Simulator::~Simulator() |
| { |
| js_free(stack_); |
| PR_DestroyLock(cacheLock_); |
| Redirection* r = redirection_; |
| while (r) { |
| Redirection* next = r->next_; |
| js_delete(r); |
| r = next; |
| } |
| } |
| |
| /* static */ void* |
| Simulator::RedirectNativeFunction(void* nativeFunction, ABIFunctionType type) |
| { |
| Redirection* redirection = Redirection::Get(nativeFunction, type); |
| return redirection->addressOfSwiInstruction(); |
| } |
| |
| // Get the active Simulator for the current thread. |
| Simulator* |
| Simulator::Current() |
| { |
| return TlsPerThreadData.get()->simulator(); |
| } |
| |
| // Sets the register in the architecture state. It will also deal with updating |
| // Simulator internal state for special registers such as PC. |
| void |
| Simulator::setRegister(int reg, int64_t value) |
| { |
| MOZ_ASSERT((reg >= 0) && (reg < Register::kNumSimuRegisters)); |
| if (reg == pc) |
| pc_modified_ = true; |
| |
| // Zero register always holds 0. |
| registers_[reg] = (reg == 0) ? 0 : value; |
| } |
| |
| void |
| Simulator::setFpuRegister(int fpureg, int64_t value) |
| { |
| MOZ_ASSERT((fpureg >= 0) && (fpureg < Simulator::FPURegister::kNumFPURegisters)); |
| FPUregisters_[fpureg] = value; |
| } |
| |
| void |
| Simulator::setFpuRegisterLo(int fpureg, int32_t value) |
| { |
| MOZ_ASSERT((fpureg >= 0) && (fpureg < Simulator::FPURegister::kNumFPURegisters)); |
| *mozilla::BitwiseCast<int32_t*>(&FPUregisters_[fpureg]) = value; |
| } |
| |
| void |
| Simulator::setFpuRegisterHi(int fpureg, int32_t value) |
| { |
| MOZ_ASSERT((fpureg >= 0) && (fpureg < Simulator::FPURegister::kNumFPURegisters)); |
| *((mozilla::BitwiseCast<int32_t*>(&FPUregisters_[fpureg])) + 1) = value; |
| } |
| |
| void |
| Simulator::setFpuRegisterFloat(int fpureg, float value) |
| { |
| MOZ_ASSERT((fpureg >= 0) && (fpureg < Simulator::FPURegister::kNumFPURegisters)); |
| *mozilla::BitwiseCast<float*>(&FPUregisters_[fpureg]) = value; |
| } |
| |
| void |
| Simulator::setFpuRegisterDouble(int fpureg, double value) |
| { |
| MOZ_ASSERT((fpureg >= 0) && (fpureg < Simulator::FPURegister::kNumFPURegisters)); |
| *mozilla::BitwiseCast<double*>(&FPUregisters_[fpureg]) = value; |
| } |
| |
| // Get the register from the architecture state. This function does handle |
| // the special case of accessing the PC register. |
| int64_t |
| Simulator::getRegister(int reg) const |
| { |
| MOZ_ASSERT((reg >= 0) && (reg < Register::kNumSimuRegisters)); |
| if (reg == 0) |
| return 0; |
| return registers_[reg] + ((reg == pc) ? SimInstruction::kPCReadOffset : 0); |
| } |
| |
| int64_t |
| Simulator::getFpuRegister(int fpureg) const |
| { |
| MOZ_ASSERT((fpureg >= 0) && (fpureg < Simulator::FPURegister::kNumFPURegisters)); |
| return FPUregisters_[fpureg]; |
| } |
| |
| int32_t |
| Simulator::getFpuRegisterLo(int fpureg) const |
| { |
| MOZ_ASSERT((fpureg >= 0) && (fpureg < Simulator::FPURegister::kNumFPURegisters)); |
| return *mozilla::BitwiseCast<int32_t*>(&FPUregisters_[fpureg]); |
| } |
| |
| int32_t |
| Simulator::getFpuRegisterHi(int fpureg) const |
| { |
| MOZ_ASSERT((fpureg >= 0) && (fpureg < Simulator::FPURegister::kNumFPURegisters)); |
| return *((mozilla::BitwiseCast<int32_t*>(&FPUregisters_[fpureg])) + 1); |
| } |
| |
| float |
| Simulator::getFpuRegisterFloat(int fpureg) const |
| { |
| MOZ_ASSERT((fpureg >= 0) && (fpureg < Simulator::FPURegister::kNumFPURegisters)); |
| return *mozilla::BitwiseCast<float*>(&FPUregisters_[fpureg]); |
| } |
| |
| double |
| Simulator::getFpuRegisterDouble(int fpureg) const |
| { |
| MOZ_ASSERT((fpureg >= 0) && (fpureg < Simulator::FPURegister::kNumFPURegisters)); |
| return *mozilla::BitwiseCast<double*>(&FPUregisters_[fpureg]); |
| } |
| |
| void |
| Simulator::setCallResultDouble(double result) |
| { |
| setFpuRegisterDouble(f0, result); |
| } |
| |
| void |
| Simulator::setCallResultFloat(float result) |
| { |
| setFpuRegisterFloat(f0, result); |
| } |
| |
| void |
| Simulator::setCallResult(int64_t res) |
| { |
| setRegister(v0, res); |
| } |
| |
| void |
| Simulator::setCallResult(__int128_t res) |
| { |
| setRegister(v0, I64(res)); |
| setRegister(v1, I64(res >> 64)); |
| } |
| |
| // Helper functions for setting and testing the FCSR register's bits. |
| void |
| Simulator::setFCSRBit(uint32_t cc, bool value) |
| { |
| if (value) |
| FCSR_ |= (1 << cc); |
| else |
| FCSR_ &= ~(1 << cc); |
| } |
| |
| bool |
| Simulator::testFCSRBit(uint32_t cc) |
| { |
| return FCSR_ & (1 << cc); |
| } |
| |
| // Sets the rounding error codes in FCSR based on the result of the rounding. |
| // Returns true if the operation was invalid. |
| bool |
| Simulator::setFCSRRoundError(double original, double rounded) |
| { |
| bool ret = false; |
| |
| if (!std::isfinite(original) || !std::isfinite(rounded)) { |
| setFCSRBit(kFCSRInvalidOpFlagBit, true); |
| ret = true; |
| } |
| |
| if (original != rounded) |
| setFCSRBit(kFCSRInexactFlagBit, true); |
| |
| if (rounded < DBL_MIN && rounded > -DBL_MIN && rounded != 0) { |
| setFCSRBit(kFCSRUnderflowFlagBit, true); |
| ret = true; |
| } |
| |
| if (rounded > INT_MAX || rounded < INT_MIN) { |
| setFCSRBit(kFCSROverflowFlagBit, true); |
| // The reference is not really clear but it seems this is required: |
| setFCSRBit(kFCSRInvalidOpFlagBit, true); |
| ret = true; |
| } |
| |
| return ret; |
| } |
| |
| // Raw access to the PC register. |
| void |
| Simulator::set_pc(int64_t value) |
| { |
| pc_modified_ = true; |
| registers_[pc] = value; |
| } |
| |
| bool |
| Simulator::has_bad_pc() const |
| { |
| return ((registers_[pc] == bad_ra) || (registers_[pc] == end_sim_pc)); |
| } |
| |
| // Raw access to the PC register without the special adjustment when reading. |
| int64_t |
| Simulator::get_pc() const |
| { |
| return registers_[pc]; |
| } |
| |
| // The MIPS cannot do unaligned reads and writes. On some MIPS platforms an |
| // interrupt is caused. On others it does a funky rotation thing. For now we |
| // simply disallow unaligned reads, but at some point we may want to move to |
| // emulating the rotate behaviour. Note that simulator runs have the runtime |
| // system running directly on the host system and only generated code is |
| // executed in the simulator. Since the host is typically IA32 we will not |
| // get the correct MIPS-like behaviour on unaligned accesses. |
| |
| uint8_t |
| Simulator::readBU(uint64_t addr, SimInstruction* instr) |
| { |
| uint8_t* ptr = reinterpret_cast<uint8_t*>(addr); |
| return* ptr; |
| } |
| |
| int8_t |
| Simulator::readB(uint64_t addr, SimInstruction* instr) |
| { |
| int8_t* ptr = reinterpret_cast<int8_t*>(addr); |
| return* ptr; |
| } |
| |
| void |
| Simulator::writeB(uint64_t addr, uint8_t value, SimInstruction* instr) |
| { |
| uint8_t* ptr = reinterpret_cast<uint8_t*>(addr); |
| *ptr = value; |
| } |
| |
| void |
| Simulator::writeB(uint64_t addr, int8_t value, SimInstruction* instr) |
| { |
| int8_t* ptr = reinterpret_cast<int8_t*>(addr); |
| *ptr = value; |
| } |
| |
| uint16_t |
| Simulator::readHU(uint64_t addr, SimInstruction* instr) |
| { |
| if ((addr & 1) == 0) { |
| uint16_t* ptr = reinterpret_cast<uint16_t*>(addr); |
| return *ptr; |
| } |
| printf("Unaligned unsigned halfword read at 0x%016lx, pc=0x%016lx\n", |
| addr, reinterpret_cast<intptr_t>(instr)); |
| MOZ_CRASH(); |
| return 0; |
| } |
| |
| int16_t |
| Simulator::readH(uint64_t addr, SimInstruction* instr) |
| { |
| if ((addr & 1) == 0) { |
| int16_t* ptr = reinterpret_cast<int16_t*>(addr); |
| return *ptr; |
| } |
| printf("Unaligned signed halfword read at 0x%016lx, pc=0x%016lx\n", |
| addr, reinterpret_cast<intptr_t>(instr)); |
| MOZ_CRASH(); |
| return 0; |
| } |
| |
| void |
| Simulator::writeH(uint64_t addr, uint16_t value, SimInstruction* instr) |
| { |
| if ((addr & 1) == 0) { |
| uint16_t* ptr = reinterpret_cast<uint16_t*>(addr); |
| *ptr = value; |
| return; |
| } |
| printf("Unaligned unsigned halfword write at 0x%016lx, pc=0x%016lx\n", |
| addr, reinterpret_cast<intptr_t>(instr)); |
| MOZ_CRASH(); |
| } |
| |
| void |
| Simulator::writeH(uint64_t addr, int16_t value, SimInstruction* instr) |
| { |
| if ((addr & 1) == 0) { |
| int16_t* ptr = reinterpret_cast<int16_t*>(addr); |
| *ptr = value; |
| return; |
| } |
| printf("Unaligned halfword write at 0x%016lx, pc=0x%016lx\n", |
| addr, reinterpret_cast<intptr_t>(instr)); |
| MOZ_CRASH(); |
| } |
| |
| uint32_t |
| Simulator::readWU(uint64_t addr, SimInstruction* instr) |
| { |
| if (addr < 0x400) { |
| // This has to be a NULL-dereference, drop into debugger. |
| printf("Memory read from bad address: 0x%016lx, pc=0x%016lx\n", |
| addr, reinterpret_cast<intptr_t>(instr)); |
| MOZ_CRASH(); |
| } |
| if ((addr & 3) == 0) { |
| uint32_t* ptr = reinterpret_cast<uint32_t*>(addr); |
| return *ptr; |
| } |
| printf("Unaligned read at 0x%016lx, pc=0x%016lx\n", |
| addr, reinterpret_cast<intptr_t>(instr)); |
| MOZ_CRASH(); |
| return 0; |
| } |
| |
| int32_t |
| Simulator::readW(uint64_t addr, SimInstruction* instr) |
| { |
| if (addr < 0x400) { |
| // This has to be a NULL-dereference, drop into debugger. |
| printf("Memory read from bad address: 0x%016lx, pc=0x%016lx\n", |
| addr, reinterpret_cast<intptr_t>(instr)); |
| MOZ_CRASH(); |
| } |
| if ((addr & 3) == 0) { |
| int32_t* ptr = reinterpret_cast<int32_t*>(addr); |
| return *ptr; |
| } |
| printf("Unaligned read at 0x%016lx, pc=0x%016lx\n", |
| addr, reinterpret_cast<intptr_t>(instr)); |
| MOZ_CRASH(); |
| return 0; |
| } |
| |
| void |
| Simulator::writeW(uint64_t addr, uint32_t value, SimInstruction* instr) |
| { |
| if (addr < 0x400) { |
| // This has to be a NULL-dereference, drop into debugger. |
| printf("Memory write to bad address: 0x%016lx, pc=0x%016lx\n", |
| addr, reinterpret_cast<intptr_t>(instr)); |
| MOZ_CRASH(); |
| } |
| if ((addr & 3) == 0) { |
| uint32_t* ptr = reinterpret_cast<uint32_t*>(addr); |
| *ptr = value; |
| return; |
| } |
| printf("Unaligned write at 0x%016lx, pc=0x%016lx\n", |
| addr, reinterpret_cast<intptr_t>(instr)); |
| MOZ_CRASH(); |
| } |
| |
| void |
| Simulator::writeW(uint64_t addr, int32_t value, SimInstruction* instr) |
| { |
| if (addr < 0x400) { |
| // This has to be a NULL-dereference, drop into debugger. |
| printf("Memory write to bad address: 0x%016lx, pc=0x%016lx\n", |
| addr, reinterpret_cast<intptr_t>(instr)); |
| MOZ_CRASH(); |
| } |
| if ((addr & 3) == 0) { |
| int32_t* ptr = reinterpret_cast<int32_t*>(addr); |
| *ptr = value; |
| return; |
| } |
| printf("Unaligned write at 0x%016lx, pc=0x%016lx\n", |
| addr, reinterpret_cast<intptr_t>(instr)); |
| MOZ_CRASH(); |
| } |
| |
| int64_t |
| Simulator::readDW(uint64_t addr, SimInstruction* instr) |
| { |
| if (addr < 0x400) { |
| // This has to be a NULL-dereference, drop into debugger. |
| printf("Memory read from bad address: 0x%016lx, pc=0x%016lx\n", |
| addr, reinterpret_cast<intptr_t>(instr)); |
| MOZ_CRASH(); |
| } |
| if ((addr & kPointerAlignmentMask) == 0) { |
| int64_t* ptr = reinterpret_cast<int64_t*>(addr); |
| return* ptr; |
| } |
| printf("Unaligned read at 0x%016lx, pc=0x%016lx\n", |
| addr, reinterpret_cast<intptr_t>(instr)); |
| MOZ_CRASH(); |
| return 0; |
| } |
| |
| void |
| Simulator::writeDW(uint64_t addr, int64_t value, SimInstruction* instr) |
| { |
| if (addr < 0x400) { |
| // This has to be a NULL-dereference, drop into debugger. |
| printf("Memory write to bad address: 0x%016lx, pc=0x%016lx\n", |
| addr, reinterpret_cast<intptr_t>(instr)); |
| MOZ_CRASH(); |
| } |
| if ((addr & kPointerAlignmentMask) == 0) { |
| int64_t* ptr = reinterpret_cast<int64_t*>(addr); |
| *ptr = value; |
| return; |
| } |
| printf("Unaligned write at 0x%016lx, pc=0x%016lx\n", |
| addr, reinterpret_cast<intptr_t>(instr)); |
| MOZ_CRASH(); |
| } |
| |
| double |
| Simulator::readD(uint64_t addr, SimInstruction* instr) |
| { |
| if ((addr & kDoubleAlignmentMask) == 0) { |
| double* ptr = reinterpret_cast<double*>(addr); |
| return *ptr; |
| } |
| printf("Unaligned (double) read at 0x%016lx, pc=0x%016lx\n", |
| addr, reinterpret_cast<intptr_t>(instr)); |
| MOZ_CRASH(); |
| return 0; |
| } |
| |
| void |
| Simulator::writeD(uint64_t addr, double value, SimInstruction* instr) |
| { |
| if ((addr & kDoubleAlignmentMask) == 0) { |
| double* ptr = reinterpret_cast<double*>(addr); |
| *ptr = value; |
| return; |
| } |
| printf("Unaligned (double) write at 0x%016lx, pc=0x%016lx\n", |
| addr, reinterpret_cast<intptr_t>(instr)); |
| MOZ_CRASH(); |
| } |
| |
| uintptr_t |
| Simulator::stackLimit() const |
| { |
| return stackLimit_; |
| } |
| |
| uintptr_t* |
| Simulator::addressOfStackLimit() |
| { |
| return &stackLimit_; |
| } |
| |
| bool |
| Simulator::overRecursed(uintptr_t newsp) const |
| { |
| if (newsp == 0) |
| newsp = getRegister(sp); |
| return newsp <= stackLimit(); |
| } |
| |
| bool |
| Simulator::overRecursedWithExtra(uint32_t extra) const |
| { |
| uintptr_t newsp = getRegister(sp) - extra; |
| return newsp <= stackLimit(); |
| } |
| |
| // Unsupported instructions use format to print an error and stop execution. |
| void |
| Simulator::format(SimInstruction* instr, const char* format) |
| { |
| printf("Simulator found unsupported instruction:\n 0x%016lx: %s\n", |
| reinterpret_cast<intptr_t>(instr), format); |
| MOZ_CRASH(); |
| } |
| |
| // Note: With the code below we assume that all runtime calls return a 64 bits |
| // result. If they don't, the v1 result register contains a bogus value, which |
| // is fine because it is caller-saved. |
| typedef int64_t (*Prototype_General0)(); |
| typedef int64_t (*Prototype_General1)(int64_t arg0); |
| typedef int64_t (*Prototype_General2)(int64_t arg0, int64_t arg1); |
| typedef int64_t (*Prototype_General3)(int64_t arg0, int64_t arg1, int64_t arg2); |
| typedef int64_t (*Prototype_General4)(int64_t arg0, int64_t arg1, int64_t arg2, int64_t arg3); |
| typedef int64_t (*Prototype_General5)(int64_t arg0, int64_t arg1, int64_t arg2, int64_t arg3, |
| int64_t arg4); |
| typedef int64_t (*Prototype_General6)(int64_t arg0, int64_t arg1, int64_t arg2, int64_t arg3, |
| int64_t arg4, int64_t arg5); |
| typedef int64_t (*Prototype_General7)(int64_t arg0, int64_t arg1, int64_t arg2, int64_t arg3, |
| int64_t arg4, int64_t arg5, int64_t arg6); |
| typedef int64_t (*Prototype_General8)(int64_t arg0, int64_t arg1, int64_t arg2, int64_t arg3, |
| int64_t arg4, int64_t arg5, int64_t arg6, int64_t arg7); |
| |
| typedef double (*Prototype_Double_None)(); |
| typedef double (*Prototype_Double_Double)(double arg0); |
| typedef double (*Prototype_Double_Int)(int64_t arg0); |
| typedef int64_t (*Prototype_Int_Double)(double arg0); |
| typedef int64_t (*Prototype_Int_DoubleIntInt)(double arg0, int64_t arg1, int64_t arg2); |
| typedef int64_t (*Prototype_Int_IntDoubleIntInt)(int64_t arg0, double arg1, int64_t arg2, |
| int64_t arg3); |
| typedef float (*Prototype_Float32_Float32)(float arg0); |
| |
| typedef double (*Prototype_DoubleInt)(double arg0, int64_t arg1); |
| typedef double (*Prototype_Double_IntDouble)(int64_t arg0, double arg1); |
| typedef double (*Prototype_Double_DoubleDouble)(double arg0, double arg1); |
| typedef int64_t (*Prototype_Int_IntDouble)(int64_t arg0, double arg1); |
| |
| typedef double (*Prototype_Double_DoubleDoubleDouble)(double arg0, double arg1, double arg2); |
| typedef double (*Prototype_Double_DoubleDoubleDoubleDouble)(double arg0, double arg1, |
| double arg2, double arg3); |
| |
| // Software interrupt instructions are used by the simulator to call into C++. |
| void |
| Simulator::softwareInterrupt(SimInstruction* instr) |
| { |
| int32_t func = instr->functionFieldRaw(); |
| uint32_t code = (func == ff_break) ? instr->bits(25, 6) : -1; |
| |
| // We first check if we met a call_rt_redirected. |
| if (instr->instructionBits() == kCallRedirInstr) { |
| #if !defined(USES_N64_ABI) |
| MOZ_CRASH("Only N64 ABI supported."); |
| #else |
| Redirection* redirection = Redirection::FromSwiInstruction(instr); |
| int64_t arg0 = getRegister(a0); |
| int64_t arg1 = getRegister(a1); |
| int64_t arg2 = getRegister(a2); |
| int64_t arg3 = getRegister(a3); |
| int64_t arg4 = getRegister(a4); |
| int64_t arg5 = getRegister(a5); |
| |
| // This is dodgy but it works because the C entry stubs are never moved. |
| // See comment in codegen-arm.cc and bug 1242173. |
| int64_t saved_ra = getRegister(ra); |
| |
| intptr_t external = reinterpret_cast<intptr_t>(redirection->nativeFunction()); |
| |
| bool stack_aligned = (getRegister(sp) & (ABIStackAlignment - 1)) == 0; |
| if (!stack_aligned) { |
| fprintf(stderr, "Runtime call with unaligned stack!\n"); |
| MOZ_CRASH(); |
| } |
| |
| if (single_stepping_) |
| single_step_callback_(single_step_callback_arg_, this, nullptr); |
| |
| switch (redirection->type()) { |
| case Args_General0: { |
| Prototype_General0 target = reinterpret_cast<Prototype_General0>(external); |
| int64_t result = target(); |
| setCallResult(result); |
| break; |
| } |
| case Args_General1: { |
| Prototype_General1 target = reinterpret_cast<Prototype_General1>(external); |
| int64_t result = target(arg0); |
| setCallResult(result); |
| break; |
| } |
| case Args_General2: { |
| Prototype_General2 target = reinterpret_cast<Prototype_General2>(external); |
| int64_t result = target(arg0, arg1); |
| setCallResult(result); |
| break; |
| } |
| case Args_General3: { |
| Prototype_General3 target = reinterpret_cast<Prototype_General3>(external); |
| int64_t result = target(arg0, arg1, arg2); |
| setCallResult(result); |
| break; |
| } |
| case Args_General4: { |
| Prototype_General4 target = reinterpret_cast<Prototype_General4>(external); |
| int64_t result = target(arg0, arg1, arg2, arg3); |
| setCallResult(result); |
| break; |
| } |
| case Args_General5: { |
| Prototype_General5 target = reinterpret_cast<Prototype_General5>(external); |
| int64_t result = target(arg0, arg1, arg2, arg3, arg4); |
| setCallResult(result); |
| break; |
| } |
| case Args_General6: { |
| Prototype_General6 target = reinterpret_cast<Prototype_General6>(external); |
| int64_t result = target(arg0, arg1, arg2, arg3, arg4, arg5); |
| setCallResult(result); |
| break; |
| } |
| case Args_General7: { |
| Prototype_General7 target = reinterpret_cast<Prototype_General7>(external); |
| int64_t arg6 = getRegister(a6); |
| int64_t result = target(arg0, arg1, arg2, arg3, arg4, arg5, arg6); |
| setCallResult(result); |
| break; |
| } |
| case Args_General8: { |
| Prototype_General8 target = reinterpret_cast<Prototype_General8>(external); |
| int64_t arg6 = getRegister(a6); |
| int64_t arg7 = getRegister(a7); |
| int64_t result = target(arg0, arg1, arg2, arg3, arg4, arg5, arg6, arg7); |
| setCallResult(result); |
| break; |
| } |
| case Args_Double_None: { |
| Prototype_Double_None target = reinterpret_cast<Prototype_Double_None>(external); |
| double dresult = target(); |
| setCallResultDouble(dresult); |
| break; |
| } |
| case Args_Int_Double: { |
| double dval0 = getFpuRegisterDouble(12); |
| Prototype_Int_Double target = reinterpret_cast<Prototype_Int_Double>(external); |
| int64_t res = target(dval0); |
| setRegister(v0, res); |
| break; |
| } |
| case Args_Int_DoubleIntInt: { |
| double dval = getFpuRegisterDouble(12); |
| Prototype_Int_DoubleIntInt target = reinterpret_cast<Prototype_Int_DoubleIntInt>(external); |
| int64_t res = target(dval, arg1, arg2); |
| setRegister(v0, res); |
| break; |
| } |
| case Args_Int_IntDoubleIntInt: { |
| double dval = getFpuRegisterDouble(13); |
| Prototype_Int_IntDoubleIntInt target = reinterpret_cast<Prototype_Int_IntDoubleIntInt>(external); |
| int64_t res = target(arg0, dval, arg2, arg3); |
| setRegister(v0, res); |
| break; |
| } |
| case Args_Double_Double: { |
| double dval0 = getFpuRegisterDouble(12); |
| Prototype_Double_Double target = reinterpret_cast<Prototype_Double_Double>(external); |
| double dresult = target(dval0); |
| setCallResultDouble(dresult); |
| break; |
| } |
| case Args_Float32_Float32: { |
| float fval0; |
| fval0 = getFpuRegisterFloat(12); |
| Prototype_Float32_Float32 target = reinterpret_cast<Prototype_Float32_Float32>(external); |
| float fresult = target(fval0); |
| setCallResultFloat(fresult); |
| break; |
| } |
| case Args_Double_Int: { |
| Prototype_Double_Int target = reinterpret_cast<Prototype_Double_Int>(external); |
| double dresult = target(arg0); |
| setCallResultDouble(dresult); |
| break; |
| } |
| case Args_Double_DoubleInt: { |
| double dval0 = getFpuRegisterDouble(12); |
| Prototype_DoubleInt target = reinterpret_cast<Prototype_DoubleInt>(external); |
| double dresult = target(dval0, arg1); |
| setCallResultDouble(dresult); |
| break; |
| } |
| case Args_Double_DoubleDouble: { |
| double dval0 = getFpuRegisterDouble(12); |
| double dval1 = getFpuRegisterDouble(13); |
| Prototype_Double_DoubleDouble target = reinterpret_cast<Prototype_Double_DoubleDouble>(external); |
| double dresult = target(dval0, dval1); |
| setCallResultDouble(dresult); |
| break; |
| } |
| case Args_Double_IntDouble: { |
| double dval1 = getFpuRegisterDouble(13); |
| Prototype_Double_IntDouble target = reinterpret_cast<Prototype_Double_IntDouble>(external); |
| double dresult = target(arg0, dval1); |
| setCallResultDouble(dresult); |
| break; |
| } |
| case Args_Int_IntDouble: { |
| double dval1 = getFpuRegisterDouble(13); |
| Prototype_Int_IntDouble target = reinterpret_cast<Prototype_Int_IntDouble>(external); |
| int64_t result = target(arg0, dval1); |
| setRegister(v0, result); |
| break; |
| } |
| case Args_Double_DoubleDoubleDouble: { |
| double dval0 = getFpuRegisterDouble(12); |
| double dval1 = getFpuRegisterDouble(13); |
| double dval2 = getFpuRegisterDouble(14); |
| Prototype_Double_DoubleDoubleDouble target = |
| reinterpret_cast<Prototype_Double_DoubleDoubleDouble>(external); |
| double dresult = target(dval0, dval1, dval2); |
| setCallResultDouble(dresult); |
| break; |
| } |
| case Args_Double_DoubleDoubleDoubleDouble: { |
| double dval0 = getFpuRegisterDouble(12); |
| double dval1 = getFpuRegisterDouble(13); |
| double dval2 = getFpuRegisterDouble(14); |
| double dval3 = getFpuRegisterDouble(15); |
| Prototype_Double_DoubleDoubleDoubleDouble target = |
| reinterpret_cast<Prototype_Double_DoubleDoubleDoubleDouble>(external); |
| double dresult = target(dval0, dval1, dval2, dval3); |
| setCallResultDouble(dresult); |
| break; |
| } |
| default: |
| MOZ_CRASH("call"); |
| } |
| |
| if (single_stepping_) |
| single_step_callback_(single_step_callback_arg_, this, nullptr); |
| |
| setRegister(ra, saved_ra); |
| set_pc(getRegister(ra)); |
| #endif |
| } else if (func == ff_break && code <= kMaxStopCode) { |
| if (isWatchpoint(code)) { |
| printWatchpoint(code); |
| } else { |
| increaseStopCounter(code); |
| handleStop(code, instr); |
| } |
| } else { |
| // All remaining break_ codes, and all traps are handled here. |
| MipsDebugger dbg(this); |
| dbg.debug(); |
| } |
| } |
| |
| // Stop helper functions. |
| bool |
| Simulator::isWatchpoint(uint32_t code) |
| { |
| return (code <= kMaxWatchpointCode); |
| } |
| |
| void |
| Simulator::printWatchpoint(uint32_t code) |
| { |
| MipsDebugger dbg(this); |
| ++break_count_; |
| printf("\n---- break %d marker: %20ld (instr count: %20ld) ----\n", |
| code, break_count_, icount_); |
| dbg.printAllRegs(); // Print registers and continue running. |
| } |
| |
| void |
| Simulator::handleStop(uint32_t code, SimInstruction* instr) |
| { |
| // Stop if it is enabled, otherwise go on jumping over the stop |
| // and the message address. |
| if (isEnabledStop(code)) { |
| MipsDebugger dbg(this); |
| dbg.stop(instr); |
| } else { |
| set_pc(get_pc() + 2 * SimInstruction::kInstrSize); |
| } |
| } |
| |
| bool |
| Simulator::isStopInstruction(SimInstruction* instr) |
| { |
| int32_t func = instr->functionFieldRaw(); |
| uint32_t code = U32(instr->bits(25, 6)); |
| return (func == ff_break) && code > kMaxWatchpointCode && code <= kMaxStopCode; |
| } |
| |
| bool |
| Simulator::isEnabledStop(uint32_t code) |
| { |
| MOZ_ASSERT(code <= kMaxStopCode); |
| MOZ_ASSERT(code > kMaxWatchpointCode); |
| return !(watchedStops_[code].count_ & kStopDisabledBit); |
| } |
| |
| void |
| Simulator::enableStop(uint32_t code) |
| { |
| if (!isEnabledStop(code)) |
| watchedStops_[code].count_ &= ~kStopDisabledBit; |
| } |
| |
| void |
| Simulator::disableStop(uint32_t code) |
| { |
| if (isEnabledStop(code)) |
| watchedStops_[code].count_ |= kStopDisabledBit; |
| } |
| |
| void |
| Simulator::increaseStopCounter(uint32_t code) |
| { |
| MOZ_ASSERT(code <= kMaxStopCode); |
| if ((watchedStops_[code].count_ & ~(1 << 31)) == 0x7fffffff) { |
| printf("Stop counter for code %i has overflowed.\n" |
| "Enabling this code and reseting the counter to 0.\n", code); |
| watchedStops_[code].count_ = 0; |
| enableStop(code); |
| } else { |
| watchedStops_[code].count_++; |
| } |
| } |
| |
| // Print a stop status. |
| void |
| Simulator::printStopInfo(uint32_t code) |
| { |
| if (code <= kMaxWatchpointCode) { |
| printf("That is a watchpoint, not a stop.\n"); |
| return; |
| } else if (code > kMaxStopCode) { |
| printf("Code too large, only %u stops can be used\n", kMaxStopCode + 1); |
| return; |
| } |
| const char* state = isEnabledStop(code) ? "Enabled" : "Disabled"; |
| int32_t count = watchedStops_[code].count_ & ~kStopDisabledBit; |
| // Don't print the state of unused breakpoints. |
| if (count != 0) { |
| if (watchedStops_[code].desc_) { |
| printf("stop %i - 0x%x: \t%s, \tcounter = %i, \t%s\n", |
| code, code, state, count, watchedStops_[code].desc_); |
| } else { |
| printf("stop %i - 0x%x: \t%s, \tcounter = %i\n", |
| code, code, state, count); |
| } |
| } |
| } |
| |
| void |
| Simulator::signalExceptions() |
| { |
| for (int i = 1; i < kNumExceptions; i++) { |
| if (exceptions[i] != 0) |
| MOZ_CRASH("Error: Exception raised."); |
| } |
| } |
| |
| // Helper function for decodeTypeRegister. |
| void |
| Simulator::configureTypeRegister(SimInstruction* instr, |
| int64_t& alu_out, |
| __int128& i128hilo, |
| unsigned __int128& u128hilo, |
| int64_t& next_pc, |
| int32_t& return_addr_reg, |
| bool& do_interrupt) |
| { |
| // Every local variable declared here needs to be const. |
| // This is to make sure that changed values are sent back to |
| // decodeTypeRegister correctly. |
| |
| // Instruction fields. |
| const Opcode op = instr->opcodeFieldRaw(); |
| const int32_t rs_reg = instr->rsValue(); |
| const int64_t rs = getRegister(rs_reg); |
| const int32_t rt_reg = instr->rtValue(); |
| const int64_t rt = getRegister(rt_reg); |
| const int32_t rd_reg = instr->rdValue(); |
| const uint32_t sa = instr->saValue(); |
| |
| const int32_t fs_reg = instr->fsValue(); |
| __int128 temp; |
| |
| |
| // ---------- Configuration. |
| switch (op) { |
| case op_cop1: // Coprocessor instructions. |
| switch (instr->rsFieldRaw()) { |
| case rs_bc1: // Handled in DecodeTypeImmed, should never come here. |
| MOZ_CRASH(); |
| break; |
| case rs_cfc1: |
| // At the moment only FCSR is supported. |
| MOZ_ASSERT(fs_reg == kFCSRRegister); |
| alu_out = FCSR_; |
| break; |
| case rs_mfc1: |
| alu_out = getFpuRegisterLo(fs_reg); |
| break; |
| case rs_dmfc1: |
| alu_out = getFpuRegister(fs_reg); |
| break; |
| case rs_mfhc1: |
| alu_out = getFpuRegisterHi(fs_reg); |
| break; |
| case rs_ctc1: |
| case rs_mtc1: |
| case rs_dmtc1: |
| case rs_mthc1: |
| // Do the store in the execution step. |
| break; |
| case rs_s: |
| case rs_d: |
| case rs_w: |
| case rs_l: |
| case rs_ps: |
| // Do everything in the execution step. |
| break; |
| default: |
| MOZ_CRASH(); |
| }; |
| break; |
| case op_cop1x: |
| break; |
| case op_special: |
| switch (instr->functionFieldRaw()) { |
| case ff_jr: |
| case ff_jalr: |
| next_pc = getRegister(instr->rsValue()); |
| return_addr_reg = instr->rdValue(); |
| break; |
| case ff_sll: |
| alu_out = I32(rt) << sa; |
| break; |
| case ff_dsll: |
| alu_out = rt << sa; |
| break; |
| case ff_dsll32: |
| alu_out = rt << (sa + 32); |
| break; |
| case ff_srl: |
| if (rs_reg == 0) { |
| // Regular logical right shift of a word by a fixed number of |
| // bits instruction. RS field is always equal to 0. |
| alu_out = I32(U32(rt) >> sa); |
| } else { |
| // Logical right-rotate of a word by a fixed number of bits. This |
| // is special case of SRL instruction, added in MIPS32 Release 2. |
| // RS field is equal to 00001. |
| alu_out = I32((U32(rt) >> sa) | (U32(rt) << (32 - sa))); |
| } |
| break; |
| case ff_dsrl: |
| if (rs_reg == 0) { |
| // Regular logical right shift of a double word by a fixed number of |
| // bits instruction. RS field is always equal to 0. |
| alu_out = U64(rt) >> sa; |
| } else { |
| // Logical right-rotate of a word by a fixed number of bits. This |
| // is special case of DSRL instruction, added in MIPS64 Release 2. |
| // RS field is equal to 00001. |
| alu_out = (U64(rt) >> sa) | (U64(rt) << (64 - sa)); |
| } |
| break; |
| case ff_dsrl32: |
| if (rs_reg == 0) { |
| // Regular logical right shift of a double word by a fixed number of |
| // bits instruction. RS field is always equal to 0. |
| alu_out = U64(rt) >> (sa + 32); |
| } else { |
| // Logical right-rotate of a double word by a fixed number of bits. This |
| // is special case of DSRL instruction, added in MIPS64 Release 2. |
| // RS field is equal to 00001. |
| alu_out = (U64(rt) >> (sa + 32)) | (U64(rt) << (64 - (sa + 32))); |
| } |
| break; |
| case ff_sra: |
| alu_out = I32(rt) >> sa; |
| break; |
| case ff_dsra: |
| alu_out = rt >> sa; |
| break; |
| case ff_dsra32: |
| alu_out = rt >> (sa + 32); |
| break; |
| case ff_sllv: |
| alu_out = I32(rt) << rs; |
| break; |
| case ff_dsllv: |
| alu_out = rt << rs; |
| break; |
| case ff_srlv: |
| if (sa == 0) { |
| // Regular logical right-shift of a word by a variable number of |
| // bits instruction. SA field is always equal to 0. |
| alu_out = I32(U32(rt) >> rs); |
| } else { |
| // Logical right-rotate of a word by a variable number of bits. |
| // This is special case od SRLV instruction, added in MIPS32 |
| // Release 2. SA field is equal to 00001. |
| alu_out = I32((U32(rt) >> rs) | (U32(rt) << (32 - rs))); |
| } |
| break; |
| case ff_dsrlv: |
| if (sa == 0) { |
| // Regular logical right-shift of a double word by a variable number of |
| // bits instruction. SA field is always equal to 0. |
| alu_out = U64(rt) >> rs; |
| } else { |
| // Logical right-rotate of a double word by a variable number of bits. |
| // This is special case od DSRLV instruction, added in MIPS64 |
| // Release 2. SA field is equal to 00001. |
| alu_out = (U64(rt) >> rs) | (U64(rt) << (64 - rs)); |
| } |
| break; |
| case ff_srav: |
| alu_out = I32(rt) >> rs; |
| break; |
| case ff_dsrav: |
| alu_out = rt >> rs; |
| break; |
| case ff_mfhi: |
| alu_out = getRegister(HI); |
| break; |
| case ff_mflo: |
| alu_out = getRegister(LO); |
| break; |
| case ff_mult: |
| i128hilo = I32(rs) * I32(rt); |
| break; |
| case ff_dmult: |
| i128hilo = I128(rs) * I128(rt); |
| break; |
| case ff_multu: |
| u128hilo = U32(rs) * U32(rt); |
| break; |
| case ff_dmultu: |
| u128hilo = U128(rs) * U128(rt); |
| break; |
| case ff_add: |
| alu_out = I32(rs) + I32(rt); |
| if ((alu_out << 32) != (alu_out << 31)) |
| exceptions[kIntegerOverflow] = 1; |
| alu_out = I32(alu_out); |
| break; |
| case ff_dadd: |
| temp = I128(rs) + I128(rt); |
| if ((temp << 64) != (temp << 63)) |
| exceptions[kIntegerOverflow] = 1; |
| alu_out = I64(temp); |
| break; |
| case ff_addu: |
| alu_out = I32(U32(rs) + U32(rt)); |
| break; |
| case ff_daddu: |
| alu_out = rs + rt; |
| break; |
| case ff_sub: |
| alu_out = I32(rs) - I32(rt); |
| if ((alu_out << 32) != (alu_out << 31)) |
| exceptions[kIntegerUnderflow] = 1; |
| alu_out = I32(alu_out); |
| break; |
| case ff_dsub: |
| temp = I128(rs) - I128(rt); |
| if ((temp << 64) != (temp << 63)) |
| exceptions[kIntegerUnderflow] = 1; |
| alu_out = I64(temp); |
| break; |
| case ff_subu: |
| alu_out = I32(U32(rs) - U32(rt)); |
| break; |
| case ff_dsubu: |
| alu_out = rs - rt; |
| break; |
| case ff_and: |
| alu_out = rs & rt; |
| break; |
| case ff_or: |
| alu_out = rs | rt; |
| break; |
| case ff_xor: |
| alu_out = rs ^ rt; |
| break; |
| case ff_nor: |
| alu_out = ~(rs | rt); |
| break; |
| case ff_slt: |
| alu_out = rs < rt ? 1 : 0; |
| break; |
| case ff_sltu: |
| alu_out = U64(rs) < U64(rt) ? 1 : 0; |
| break; |
| case ff_sync: |
| break; |
| // Break and trap instructions. |
| case ff_break: |
| do_interrupt = true; |
| break; |
| case ff_tge: |
| do_interrupt = rs >= rt; |
| break; |
| case ff_tgeu: |
| do_interrupt = U64(rs) >= U64(rt); |
| break; |
| case ff_tlt: |
| do_interrupt = rs < rt; |
| break; |
| case ff_tltu: |
| do_interrupt = U64(rs) < U64(rt); |
| break; |
| case ff_teq: |
| do_interrupt = rs == rt; |
| break; |
| case ff_tne: |
| do_interrupt = rs != rt; |
| break; |
| case ff_movn: |
| case ff_movz: |
| case ff_movci: |
| // No action taken on decode. |
| break; |
| case ff_div: |
| if (I32(rs) == INT_MIN && I32(rt) == -1) { |
| i128hilo = U32(INT_MIN); |
| } else { |
| uint32_t div = I32(rs) / I32(rt); |
| uint32_t mod = I32(rs) % I32(rt); |
| i128hilo = (I64(mod) << 32) | div; |
| } |
| break; |
| case ff_ddiv: |
| if (I32(rs) == INT_MIN && I32(rt) == -1) { |
| i128hilo = U64(INT64_MIN); |
| } else { |
| uint64_t div = rs / rt; |
| uint64_t mod = rs % rt; |
| i128hilo = (I128(mod) << 64) | div; |
| } |
| break; |
| case ff_divu: { |
| uint32_t div = U32(rs) / U32(rt); |
| uint32_t mod = U32(rs) % U32(rt); |
| i128hilo = (U64(mod) << 32) | div; |
| } |
| break; |
| case ff_ddivu: |
| if (0 == rt) { |
| i128hilo = (I128(Unpredictable) << 64) | I64(Unpredictable); |
| } else { |
| uint64_t div = U64(rs) / U64(rt); |
| uint64_t mod = U64(rs) % U64(rt); |
| i128hilo = (I128(mod) << 64) | div; |
| } |
| break; |
| default: |
| MOZ_CRASH(); |
| }; |
| break; |
| case op_special2: |
| switch (instr->functionFieldRaw()) { |
| case ff_mul: |
| alu_out = I32(I32(rs) * I32(rt)); // Only the lower 32 bits are kept. |
| break; |
| case ff_clz: |
| alu_out = U32(rs) ? __builtin_clz(U32(rs)) : 32; |
| break; |
| case ff_dclz: |
| alu_out = U64(rs) ? __builtin_clzl(U64(rs)) : 64; |
| break; |
| default: |
| MOZ_CRASH(); |
| }; |
| break; |
| case op_special3: |
| switch (instr->functionFieldRaw()) { |
| case ff_ins: { // Mips64r2 instruction. |
| // Interpret rd field as 5-bit msb of insert. |
| uint16_t msb = rd_reg; |
| // Interpret sa field as 5-bit lsb of insert. |
| uint16_t lsb = sa; |
| uint16_t size = msb - lsb + 1; |
| uint32_t mask = (1 << size) - 1; |
| if (lsb > msb) |
| alu_out = Unpredictable; |
| else |
| alu_out = (U32(rt) & ~(mask << lsb)) | ((U32(rs) & mask) << lsb); |
| break; |
| } |
| case ff_dins: { // Mips64r2 instruction. |
| // Interpret rd field as 5-bit msb of insert. |
| uint16_t msb = rd_reg; |
| // Interpret sa field as 5-bit lsb of insert. |
| uint16_t lsb = sa; |
| uint16_t size = msb - lsb + 1; |
| uint64_t mask = (1ul << size) - 1; |
| if (lsb > msb) |
| alu_out = Unpredictable; |
| else |
| alu_out = (U64(rt) & ~(mask << lsb)) | ((U64(rs) & mask) << lsb); |
| break; |
| } |
| case ff_dinsm: { // Mips64r2 instruction. |
| // Interpret rd field as 5-bit msb of insert. |
| uint16_t msb = rd_reg; |
| // Interpret sa field as 5-bit lsb of insert. |
| uint16_t lsb = sa; |
| uint16_t size = msb - lsb + 33; |
| uint64_t mask = (1ul << size) - 1; |
| alu_out = (U64(rt) & ~(mask << lsb)) | ((U64(rs) & mask) << lsb); |
| break; |
| } |
| case ff_dinsu: { // Mips64r2 instruction. |
| // Interpret rd field as 5-bit msb of insert. |
| uint16_t msb = rd_reg; |
| // Interpret sa field as 5-bit lsb of insert. |
| uint16_t lsb = sa + 32; |
| uint16_t size = msb - lsb + 33; |
| uint64_t mask = (1ul << size) - 1; |
| if (sa > msb) |
| alu_out = Unpredictable; |
| else |
| alu_out = (U64(rt) & ~(mask << lsb)) | ((U64(rs) & mask) << lsb); |
| break; |
| } |
| case ff_ext: { // Mips64r2 instruction. |
| // Interpret rd field as 5-bit msb of extract. |
| uint16_t msb = rd_reg; |
| // Interpret sa field as 5-bit lsb of extract. |
| uint16_t lsb = sa; |
| uint16_t size = msb + 1; |
| uint32_t mask = (1 << size) - 1; |
| if ((lsb + msb) > 31) |
| alu_out = Unpredictable; |
| else |
| alu_out = (U32(rs) & (mask << lsb)) >> lsb; |
| break; |
| } |
| case ff_dext: { // Mips64r2 instruction. |
| // Interpret rd field as 5-bit msb of extract. |
| uint16_t msb = rd_reg; |
| // Interpret sa field as 5-bit lsb of extract. |
| uint16_t lsb = sa; |
| uint16_t size = msb + 1; |
| uint64_t mask = (1ul << size) - 1; |
| alu_out = (U64(rs) & (mask << lsb)) >> lsb; |
| break; |
| } |
| case ff_dextm: { // Mips64r2 instruction. |
| // Interpret rd field as 5-bit msb of extract. |
| uint16_t msb = rd_reg; |
| // Interpret sa field as 5-bit lsb of extract. |
| uint16_t lsb = sa; |
| uint16_t size = msb + 33; |
| uint64_t mask = (1ul << size) - 1; |
| if ((lsb + msb + 32 + 1) > 64) |
| alu_out = Unpredictable; |
| else |
| alu_out = (U64(rs) & (mask << lsb)) >> lsb; |
| break; |
| } |
| case ff_dextu: { // Mips64r2 instruction. |
| // Interpret rd field as 5-bit msb of extract. |
| uint16_t msb = rd_reg; |
| // Interpret sa field as 5-bit lsb of extract. |
| uint16_t lsb = sa + 32; |
| uint16_t size = msb + 1; |
| uint64_t mask = (1ul << size) - 1; |
| if ((lsb + msb + 1) > 64) |
| alu_out = Unpredictable; |
| else |
| alu_out = (U64(rs) & (mask << lsb)) >> lsb; |
| break; |
| } |
| case ff_bshfl: { // Mips32r2 instruction. |
| if (16 == sa) // seb |
| alu_out = I64(I8(rt)); |
| else if (24 == sa) // seh |
| alu_out = I64(I16(rt)); |
| break; |
| } |
| default: |
| MOZ_CRASH(); |
| }; |
| break; |
| default: |
| MOZ_CRASH(); |
| }; |
| } |
| |
| // Handle execution based on instruction types. |
| void |
| Simulator::decodeTypeRegister(SimInstruction* instr) |
| { |
| // Instruction fields. |
| const Opcode op = instr->opcodeFieldRaw(); |
| const int32_t rs_reg = instr->rsValue(); |
| const int64_t rs = getRegister(rs_reg); |
| const int32_t rt_reg = instr->rtValue(); |
| const int64_t rt = getRegister(rt_reg); |
| const int32_t rd_reg = instr->rdValue(); |
| |
| const int32_t fr_reg = instr->frValue(); |
| const int32_t fs_reg = instr->fsValue(); |
| const int32_t ft_reg = instr->ftValue(); |
| const int32_t fd_reg = instr->fdValue(); |
| __int128 i128hilo = 0; |
| unsigned __int128 u128hilo = 0; |
| |
| // ALU output. |
| // It should not be used as is. Instructions using it should always |
| // initialize it first. |
| int64_t alu_out = 0x12345678; |
| |
| // For break and trap instructions. |
| bool do_interrupt = false; |
| |
| // For jr and jalr. |
| // Get current pc. |
| int64_t current_pc = get_pc(); |
| // Next pc |
| int64_t next_pc = 0; |
| int32_t return_addr_reg = 31; |
| |
| // Set up the variables if needed before executing the instruction. |
| configureTypeRegister(instr, |
| alu_out, |
| i128hilo, |
| u128hilo, |
| next_pc, |
| return_addr_reg, |
| do_interrupt); |
| |
| // ---------- Raise exceptions triggered. |
| signalExceptions(); |
| |
| // ---------- Execution. |
| switch (op) { |
| case op_cop1: |
| switch (instr->rsFieldRaw()) { |
| case rs_bc1: // Branch on coprocessor condition. |
| MOZ_CRASH(); |
| break; |
| case rs_cfc1: |
| setRegister(rt_reg, alu_out); |
| case rs_mfc1: |
| setRegister(rt_reg, alu_out); |
| break; |
| case rs_dmfc1: |
| setRegister(rt_reg, alu_out); |
| break; |
| case rs_mfhc1: |
| setRegister(rt_reg, alu_out); |
| break; |
| case rs_ctc1: |
| // At the moment only FCSR is supported. |
| MOZ_ASSERT(fs_reg == kFCSRRegister); |
| FCSR_ = registers_[rt_reg]; |
| break; |
| case rs_mtc1: |
| setFpuRegisterLo(fs_reg, registers_[rt_reg]); |
| break; |
| case rs_dmtc1: |
| setFpuRegister(fs_reg, registers_[rt_reg]); |
| break; |
| case rs_mthc1: |
| setFpuRegisterHi(fs_reg, registers_[rt_reg]); |
| break; |
| case rs_s: |
| float f, ft_value, fs_value; |
| uint32_t cc, fcsr_cc; |
| int64_t i64; |
| fs_value = getFpuRegisterFloat(fs_reg); |
| ft_value = getFpuRegisterFloat(ft_reg); |
| cc = instr->fcccValue(); |
| fcsr_cc = GetFCSRConditionBit(cc); |
| switch (instr->functionFieldRaw()) { |
| case ff_add_fmt: |
| setFpuRegisterFloat(fd_reg, fs_value + ft_value); |
| break; |
| case ff_sub_fmt: |
| setFpuRegisterFloat(fd_reg, fs_value - ft_value); |
| break; |
| case ff_mul_fmt: |
| setFpuRegisterFloat(fd_reg, fs_value * ft_value); |
| break; |
| case ff_div_fmt: |
| setFpuRegisterFloat(fd_reg, fs_value / ft_value); |
| break; |
| case ff_abs_fmt: |
| setFpuRegisterFloat(fd_reg, fabsf(fs_value)); |
| break; |
| case ff_mov_fmt: |
| setFpuRegisterFloat(fd_reg, fs_value); |
| break; |
| case ff_neg_fmt: |
| setFpuRegisterFloat(fd_reg, -fs_value); |
| break; |
| case ff_sqrt_fmt: |
| setFpuRegisterFloat(fd_reg, sqrtf(fs_value)); |
| break; |
| case ff_c_un_fmt: |
| setFCSRBit(fcsr_cc, mozilla::IsNaN(fs_value) || mozilla::IsNaN(ft_value)); |
| break; |
| case ff_c_eq_fmt: |
| setFCSRBit(fcsr_cc, (fs_value == ft_value)); |
| break; |
| case ff_c_ueq_fmt: |
| setFCSRBit(fcsr_cc, |
| (fs_value == ft_value) || (mozilla::IsNaN(fs_value) || mozilla::IsNaN(ft_value))); |
| break; |
| case ff_c_olt_fmt: |
| setFCSRBit(fcsr_cc, (fs_value < ft_value)); |
| break; |
| case ff_c_ult_fmt: |
| setFCSRBit(fcsr_cc, |
| (fs_value < ft_value) || (mozilla::IsNaN(fs_value) || mozilla::IsNaN(ft_value))); |
| break; |
| case ff_c_ole_fmt: |
| setFCSRBit(fcsr_cc, (fs_value <= ft_value)); |
| break; |
| case ff_c_ule_fmt: |
| setFCSRBit(fcsr_cc, |
| (fs_value <= ft_value) || (mozilla::IsNaN(fs_value) || mozilla::IsNaN(ft_value))); |
| break; |
| case ff_cvt_d_fmt: |
| f = getFpuRegisterFloat(fs_reg); |
| setFpuRegisterDouble(fd_reg, static_cast<double>(f)); |
| break; |
| case ff_cvt_w_fmt: // Convert float to word. |
| // Rounding modes are not yet supported. |
| MOZ_ASSERT((FCSR_ & 3) == 0); |
| // In rounding mode 0 it should behave like ROUND. |
| case ff_round_w_fmt: { // Round double to word (round half to even). |
| float rounded = std::floor(fs_value + 0.5); |
| int32_t result = I32(rounded); |
| if ((result & 1) != 0 && result - fs_value == 0.5) { |
| // If the number is halfway between two integers, |
| // round to the even one. |
| result--; |
| } |
| setFpuRegisterLo(fd_reg, result); |
| if (setFCSRRoundError(fs_value, rounded)) { |
| setFpuRegisterLo(fd_reg, kFPUInvalidResult); |
| } |
| break; |
| } |
| case ff_trunc_w_fmt: { // Truncate float to word (round towards 0). |
| float rounded = truncf(fs_value); |
| int32_t result = I32(rounded); |
| setFpuRegisterLo(fd_reg, result); |
| if (setFCSRRoundError(fs_value, rounded)) { |
| setFpuRegisterLo(fd_reg, kFPUInvalidResult); |
| } |
| break; |
| } |
| case ff_floor_w_fmt: { // Round float to word towards negative infinity. |
| float rounded = std::floor(fs_value); |
| int32_t result = I32(rounded); |
| setFpuRegisterLo(fd_reg, result); |
| if (setFCSRRoundError(fs_value, rounded)) { |
| setFpuRegisterLo(fd_reg, kFPUInvalidResult); |
| } |
| break; |
| } |
| case ff_ceil_w_fmt: { // Round double to word towards positive infinity. |
| float rounded = std::ceil(fs_value); |
| int32_t result = I32(rounded); |
| setFpuRegisterLo(fd_reg, result); |
| if (setFCSRRoundError(fs_value, rounded)) { |
| setFpuRegisterLo(fd_reg, kFPUInvalidResult); |
| } |
| break; |
| } |
| case ff_cvt_l_fmt: { // Mips64r2: Truncate float to 64-bit long-word. |
| float rounded = truncf(fs_value); |
| i64 = I64(rounded); |
| setFpuRegister(fd_reg, i64); |
| break; |
| } |
| case ff_round_l_fmt: { // Mips64r2 instruction. |
| float rounded = |
| fs_value > 0 ? std::floor(fs_value + 0.5) : std::ceil(fs_value - 0.5); |
| i64 = I64(rounded); |
| setFpuRegister(fd_reg, i64); |
| break; |
| } |
| case ff_trunc_l_fmt: { // Mips64r2 instruction. |
| float rounded = truncf(fs_value); |
| i64 = I64(rounded); |
| setFpuRegister(fd_reg, i64); |
| break; |
| } |
| case ff_floor_l_fmt: // Mips64r2 instruction. |
| i64 = I64(std::floor(fs_value)); |
| setFpuRegister(fd_reg, i64); |
| break; |
| case ff_ceil_l_fmt: // Mips64r2 instruction. |
| i64 = I64(std::ceil(fs_value)); |
| setFpuRegister(fd_reg, i64); |
| break; |
| case ff_cvt_ps_s: |
| case ff_c_f_fmt: |
| MOZ_CRASH(); |
| break; |
| default: |
| MOZ_CRASH(); |
| } |
| break; |
| case rs_d: |
| double dt_value, ds_value; |
| ds_value = |