| /* | 
 |  *  Copyright (c) 2013 The WebM project authors. All Rights Reserved. | 
 |  * | 
 |  *  Use of this source code is governed by a BSD-style license | 
 |  *  that can be found in the LICENSE file in the root of the source | 
 |  *  tree. An additional intellectual property rights grant can be found | 
 |  *  in the file PATENTS.  All contributing project authors may | 
 |  *  be found in the AUTHORS file in the root of the source tree. | 
 |  */ | 
 |  | 
 | #include <math.h> | 
 |  | 
 | #include "vpx_ports/mem.h" | 
 | #include "vpx_ports/system_state.h" | 
 |  | 
 | #include "vp9/encoder/vp9_aq_variance.h" | 
 |  | 
 | #include "vp9/common/vp9_seg_common.h" | 
 |  | 
 | #include "vp9/encoder/vp9_ratectrl.h" | 
 | #include "vp9/encoder/vp9_rd.h" | 
 | #include "vp9/encoder/vp9_encodeframe.h" | 
 | #include "vp9/encoder/vp9_segmentation.h" | 
 |  | 
 | #define ENERGY_MIN (-4) | 
 | #define ENERGY_MAX (1) | 
 | #define ENERGY_SPAN (ENERGY_MAX - ENERGY_MIN + 1) | 
 | #define ENERGY_IN_BOUNDS(energy) \ | 
 |   assert((energy) >= ENERGY_MIN && (energy) <= ENERGY_MAX) | 
 |  | 
 | static const double rate_ratio[MAX_SEGMENTS] = { 2.5,  2.0, 1.5, 1.0, | 
 |                                                  0.75, 1.0, 1.0, 1.0 }; | 
 | static const int segment_id[ENERGY_SPAN] = { 0, 1, 1, 2, 3, 4 }; | 
 |  | 
 | #define SEGMENT_ID(i) segment_id[(i)-ENERGY_MIN] | 
 |  | 
 | DECLARE_ALIGNED(16, static const uint8_t, vp9_64_zeros[64]) = { 0 }; | 
 | #if CONFIG_VP9_HIGHBITDEPTH | 
 | DECLARE_ALIGNED(16, static const uint16_t, vp9_highbd_64_zeros[64]) = { 0 }; | 
 | #endif | 
 |  | 
 | unsigned int vp9_vaq_segment_id(int energy) { | 
 |   ENERGY_IN_BOUNDS(energy); | 
 |   return SEGMENT_ID(energy); | 
 | } | 
 |  | 
 | void vp9_vaq_frame_setup(VP9_COMP *cpi) { | 
 |   VP9_COMMON *cm = &cpi->common; | 
 |   struct segmentation *seg = &cm->seg; | 
 |   int i; | 
 |  | 
 |   if (frame_is_intra_only(cm) || cm->error_resilient_mode || | 
 |       cpi->refresh_alt_ref_frame || cpi->force_update_segmentation || | 
 |       (cpi->refresh_golden_frame && !cpi->rc.is_src_frame_alt_ref)) { | 
 |     vp9_enable_segmentation(seg); | 
 |     vp9_clearall_segfeatures(seg); | 
 |  | 
 |     seg->abs_delta = SEGMENT_DELTADATA; | 
 |  | 
 |     vpx_clear_system_state(); | 
 |  | 
 |     for (i = 0; i < MAX_SEGMENTS; ++i) { | 
 |       int qindex_delta = | 
 |           vp9_compute_qdelta_by_rate(&cpi->rc, cm->frame_type, cm->base_qindex, | 
 |                                      rate_ratio[i], cm->bit_depth); | 
 |  | 
 |       // We don't allow qindex 0 in a segment if the base value is not 0. | 
 |       // Q index 0 (lossless) implies 4x4 encoding only and in AQ mode a segment | 
 |       // Q delta is sometimes applied without going back around the rd loop. | 
 |       // This could lead to an illegal combination of partition size and q. | 
 |       if ((cm->base_qindex != 0) && ((cm->base_qindex + qindex_delta) == 0)) { | 
 |         qindex_delta = -cm->base_qindex + 1; | 
 |       } | 
 |  | 
 |       // No need to enable SEG_LVL_ALT_Q for this segment. | 
 |       if (rate_ratio[i] == 1.0) { | 
 |         continue; | 
 |       } | 
 |  | 
 |       vp9_set_segdata(seg, i, SEG_LVL_ALT_Q, qindex_delta); | 
 |       vp9_enable_segfeature(seg, i, SEG_LVL_ALT_Q); | 
 |     } | 
 |   } | 
 | } | 
 |  | 
 | /* TODO(agrange, paulwilkins): The block_variance calls the unoptimized versions | 
 |  * of variance() and highbd_8_variance(). It should not. | 
 |  */ | 
 | static void aq_variance(const uint8_t *a, int a_stride, const uint8_t *b, | 
 |                         int b_stride, int w, int h, unsigned int *sse, | 
 |                         int *sum) { | 
 |   int i, j; | 
 |  | 
 |   *sum = 0; | 
 |   *sse = 0; | 
 |  | 
 |   for (i = 0; i < h; i++) { | 
 |     for (j = 0; j < w; j++) { | 
 |       const int diff = a[j] - b[j]; | 
 |       *sum += diff; | 
 |       *sse += diff * diff; | 
 |     } | 
 |  | 
 |     a += a_stride; | 
 |     b += b_stride; | 
 |   } | 
 | } | 
 |  | 
 | #if CONFIG_VP9_HIGHBITDEPTH | 
 | static void aq_highbd_variance64(const uint8_t *a8, int a_stride, | 
 |                                  const uint8_t *b8, int b_stride, int w, int h, | 
 |                                  uint64_t *sse, int64_t *sum) { | 
 |   int i, j; | 
 |  | 
 |   uint16_t *a = CONVERT_TO_SHORTPTR(a8); | 
 |   uint16_t *b = CONVERT_TO_SHORTPTR(b8); | 
 |   *sum = 0; | 
 |   *sse = 0; | 
 |  | 
 |   for (i = 0; i < h; i++) { | 
 |     for (j = 0; j < w; j++) { | 
 |       const int diff = a[j] - b[j]; | 
 |       *sum += diff; | 
 |       *sse += diff * diff; | 
 |     } | 
 |     a += a_stride; | 
 |     b += b_stride; | 
 |   } | 
 | } | 
 |  | 
 | #endif  // CONFIG_VP9_HIGHBITDEPTH | 
 |  | 
 | static unsigned int block_variance(VP9_COMP *cpi, MACROBLOCK *x, | 
 |                                    BLOCK_SIZE bs) { | 
 |   MACROBLOCKD *xd = &x->e_mbd; | 
 |   unsigned int var, sse; | 
 |   int right_overflow = | 
 |       (xd->mb_to_right_edge < 0) ? ((-xd->mb_to_right_edge) >> 3) : 0; | 
 |   int bottom_overflow = | 
 |       (xd->mb_to_bottom_edge < 0) ? ((-xd->mb_to_bottom_edge) >> 3) : 0; | 
 |  | 
 |   if (right_overflow || bottom_overflow) { | 
 |     const int bw = 8 * num_8x8_blocks_wide_lookup[bs] - right_overflow; | 
 |     const int bh = 8 * num_8x8_blocks_high_lookup[bs] - bottom_overflow; | 
 |     int avg; | 
 | #if CONFIG_VP9_HIGHBITDEPTH | 
 |     if (xd->cur_buf->flags & YV12_FLAG_HIGHBITDEPTH) { | 
 |       uint64_t sse64 = 0; | 
 |       int64_t sum64 = 0; | 
 |       aq_highbd_variance64(x->plane[0].src.buf, x->plane[0].src.stride, | 
 |                            CONVERT_TO_BYTEPTR(vp9_highbd_64_zeros), 0, bw, bh, | 
 |                            &sse64, &sum64); | 
 |       sse = (unsigned int)(sse64 >> (2 * (xd->bd - 8))); | 
 |       avg = (int)(sum64 >> (xd->bd - 8)); | 
 |     } else { | 
 |       aq_variance(x->plane[0].src.buf, x->plane[0].src.stride, vp9_64_zeros, 0, | 
 |                   bw, bh, &sse, &avg); | 
 |     } | 
 | #else | 
 |     aq_variance(x->plane[0].src.buf, x->plane[0].src.stride, vp9_64_zeros, 0, | 
 |                 bw, bh, &sse, &avg); | 
 | #endif  // CONFIG_VP9_HIGHBITDEPTH | 
 |     var = sse - (unsigned int)(((int64_t)avg * avg) / (bw * bh)); | 
 |     return (unsigned int)(((uint64_t)256 * var) / (bw * bh)); | 
 |   } else { | 
 | #if CONFIG_VP9_HIGHBITDEPTH | 
 |     if (xd->cur_buf->flags & YV12_FLAG_HIGHBITDEPTH) { | 
 |       var = | 
 |           cpi->fn_ptr[bs].vf(x->plane[0].src.buf, x->plane[0].src.stride, | 
 |                              CONVERT_TO_BYTEPTR(vp9_highbd_64_zeros), 0, &sse); | 
 |     } else { | 
 |       var = cpi->fn_ptr[bs].vf(x->plane[0].src.buf, x->plane[0].src.stride, | 
 |                                vp9_64_zeros, 0, &sse); | 
 |     } | 
 | #else | 
 |     var = cpi->fn_ptr[bs].vf(x->plane[0].src.buf, x->plane[0].src.stride, | 
 |                              vp9_64_zeros, 0, &sse); | 
 | #endif  // CONFIG_VP9_HIGHBITDEPTH | 
 |     return (unsigned int)(((uint64_t)256 * var) >> num_pels_log2_lookup[bs]); | 
 |   } | 
 | } | 
 |  | 
 | double vp9_log_block_var(VP9_COMP *cpi, MACROBLOCK *x, BLOCK_SIZE bs) { | 
 |   unsigned int var = block_variance(cpi, x, bs); | 
 |   vpx_clear_system_state(); | 
 |   return log(var + 1.0); | 
 | } | 
 |  | 
 | #define DEFAULT_E_MIDPOINT 10.0 | 
 | static int scale_block_energy(VP9_COMP *cpi, unsigned int block_var) { | 
 |   double energy; | 
 |   double energy_midpoint; | 
 |   energy_midpoint = | 
 |       (cpi->oxcf.pass == 2) ? cpi->twopass.mb_av_energy : DEFAULT_E_MIDPOINT; | 
 |   energy = log(block_var + 1.0) - energy_midpoint; | 
 |   return clamp((int)round(energy), ENERGY_MIN, ENERGY_MAX); | 
 | } | 
 | #undef DEFAULT_E_MIDPOINT | 
 |  | 
 | // Get the range of sub block energy values; | 
 | void vp9_get_sub_block_energy(VP9_COMP *cpi, MACROBLOCK *mb, int mi_row, | 
 |                               int mi_col, BLOCK_SIZE bsize, int *min_e, | 
 |                               int *max_e) { | 
 |   VP9_COMMON *const cm = &cpi->common; | 
 |   const int bw = num_8x8_blocks_wide_lookup[bsize]; | 
 |   const int bh = num_8x8_blocks_high_lookup[bsize]; | 
 |   const int xmis = VPXMIN(cm->mi_cols - mi_col, bw); | 
 |   const int ymis = VPXMIN(cm->mi_rows - mi_row, bh); | 
 |   int x, y; | 
 |  | 
 |   if (xmis < bw || ymis < bh) { | 
 |     vp9_setup_src_planes(mb, cpi->Source, mi_row, mi_col); | 
 |     *min_e = vp9_block_energy(cpi, mb, bsize); | 
 |     *max_e = *min_e; | 
 |   } else { | 
 |     unsigned int var; | 
 |     // Because scale_block_energy is non-decreasing, we can find the min/max | 
 |     // block variance and scale afterwards. This avoids a costly scaling at | 
 |     // every iteration. | 
 |     unsigned int min_var = UINT_MAX; | 
 |     unsigned int max_var = 0; | 
 |  | 
 |     for (y = 0; y < ymis; ++y) { | 
 |       for (x = 0; x < xmis; ++x) { | 
 |         vp9_setup_src_planes(mb, cpi->Source, mi_row + y, mi_col + x); | 
 |         vpx_clear_system_state(); | 
 |         var = block_variance(cpi, mb, BLOCK_8X8); | 
 |         vpx_clear_system_state(); | 
 |         min_var = VPXMIN(min_var, var); | 
 |         max_var = VPXMAX(max_var, var); | 
 |       } | 
 |     } | 
 |     *min_e = scale_block_energy(cpi, min_var); | 
 |     *max_e = scale_block_energy(cpi, max_var); | 
 |   } | 
 |  | 
 |   // Re-instate source pointers back to what they should have been on entry. | 
 |   vp9_setup_src_planes(mb, cpi->Source, mi_row, mi_col); | 
 | } | 
 |  | 
 | int vp9_block_energy(VP9_COMP *cpi, MACROBLOCK *x, BLOCK_SIZE bs) { | 
 |   unsigned int var; | 
 |   vpx_clear_system_state(); | 
 |   var = block_variance(cpi, x, bs); | 
 |   vpx_clear_system_state(); | 
 |   return scale_block_energy(cpi, var); | 
 | } |