| # Copyright (C) 2012 Apple Inc. All rights reserved. |
| # |
| # Redistribution and use in source and binary forms, with or without |
| # modification, are permitted provided that the following conditions |
| # are met: |
| # 1. Redistributions of source code must retain the above copyright |
| # notice, this list of conditions and the following disclaimer. |
| # 2. Redistributions in binary form must reproduce the above copyright |
| # notice, this list of conditions and the following disclaimer in the |
| # documentation and/or other materials provided with the distribution. |
| # |
| # THIS SOFTWARE IS PROVIDED BY APPLE INC. AND ITS CONTRIBUTORS ``AS IS'' |
| # AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, |
| # THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR |
| # PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL APPLE INC. OR ITS CONTRIBUTORS |
| # BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF |
| # THE POSSIBILITY OF SUCH DAMAGE. |
| |
| require "config" |
| require "ast" |
| require "opt" |
| |
| # The CLoop llint backend is initially based on the ARMv7 backend, and |
| # then further enhanced with a few instructions from the x86 backend to |
| # support building for X64 targets. Hence, the shape of the generated |
| # code and the usage convention of registers will look a lot like the |
| # ARMv7 backend's. |
| |
| def cloopMapType(type) |
| case type |
| when :int; ".i" |
| when :uint; ".u" |
| when :int32; ".i32" |
| when :uint32; ".u32" |
| when :int64; ".i64" |
| when :uint64; ".u64" |
| when :int8; ".i8" |
| when :uint8; ".u8" |
| when :int8Ptr; ".i8p" |
| when :voidPtr; ".vp" |
| when :nativeFunc; ".nativeFunc" |
| when :double; ".d" |
| when :castToDouble; ".castToDouble" |
| when :castToInt64; ".castToInt64" |
| when :opcode; ".opcode" |
| else; |
| raise "Unsupported type" |
| end |
| end |
| |
| |
| class SpecialRegister < NoChildren |
| def dump |
| @name |
| end |
| def clValue(type=:int) |
| @name + cloopMapType(type) |
| end |
| end |
| |
| C_LOOP_SCRATCH_FPR = SpecialRegister.new("d8") |
| |
| class RegisterID |
| def dump |
| case name |
| when "t0" |
| "t0" |
| when "t1" |
| "t1" |
| when "t2" |
| "t2" |
| when "t3" |
| "t3" |
| when "t4" |
| "rPC" |
| when "t6" |
| "rBasePC" |
| when "csr1" |
| "tagTypeNumber" |
| when "csr2" |
| "tagMask" |
| when "cfr" |
| "cfr" |
| when "lr" |
| "rRetVPC" |
| when "sp" |
| "sp" |
| else |
| raise "Bad register #{name} for C_LOOP at #{codeOriginString}" |
| end |
| end |
| def clValue(type=:int) |
| dump + cloopMapType(type) |
| end |
| end |
| |
| class FPRegisterID |
| def dump |
| case name |
| when "ft0", "fr" |
| "d0" |
| when "ft1" |
| "d1" |
| when "ft2" |
| "d2" |
| when "ft3" |
| "d3" |
| when "ft4" |
| "d4" |
| when "ft5" |
| "d5" |
| else |
| raise "Bad register #{name} for C_LOOP at #{codeOriginString}" |
| end |
| end |
| def clValue(type=:int) |
| dump + cloopMapType(type) |
| end |
| end |
| |
| class Immediate |
| def dump |
| "#{value}" |
| end |
| def clValue(type=:int) |
| # There is a case of a very large unsigned number (0x8000000000000000) |
| # which we wish to encode. Unfortunately, the C/C++ compiler |
| # complains if we express that number as a positive decimal integer. |
| # Hence, for positive values, we just convert the number into hex form |
| # to keep the compiler happy. |
| # |
| # However, for negative values, the to_s(16) hex conversion method does |
| # not strip the "-" sign resulting in a meaningless "0x-..." valueStr. |
| # To workaround this, we simply don't encode negative numbers as hex. |
| |
| valueStr = (value < 0) ? "#{value}" : "0x#{value.to_s(16)}" |
| |
| case type |
| when :int8; "int8_t(#{valueStr})" |
| when :int32; "int32_t(#{valueStr})" |
| when :int64; "int64_t(#{valueStr})" |
| when :int; "intptr_t(#{valueStr})" |
| when :uint8; "uint8_t(#{valueStr})" |
| when :uint32; "uint32_t(#{valueStr})" |
| when :uint64; "uint64_t(#{valueStr})" |
| when :uint; "uintptr_t(#{valueStr})" |
| else |
| raise "Not implemented immediate of type: #{type}" |
| end |
| end |
| end |
| |
| class Address |
| def dump |
| "[#{base.dump}, #{offset.value}]" |
| end |
| def clValue(type=:int) |
| case type |
| when :int8; int8MemRef |
| when :int32; int32MemRef |
| when :int64; int64MemRef |
| when :int; intMemRef |
| when :uint8; uint8MemRef |
| when :uint32; uint32MemRef |
| when :uint64; uint64MemRef |
| when :uint; uintMemRef |
| when :opcode; opcodeMemRef |
| when :nativeFunc; nativeFuncMemRef |
| else |
| raise "Unexpected Address type: #{type}" |
| end |
| end |
| def pointerExpr |
| if base.is_a? RegisterID and base.name == "sp" |
| offsetValue = "#{offset.value}" |
| "(ASSERT(#{offsetValue} == offsetof(JITStackFrame, globalData)), &sp->globalData)" |
| elsif offset.value == 0 |
| "#{base.clValue(:int8Ptr)}" |
| elsif offset.value > 0 |
| "#{base.clValue(:int8Ptr)} + #{offset.value}" |
| else |
| "#{base.clValue(:int8Ptr)} - #{-offset.value}" |
| end |
| end |
| def int8MemRef |
| "*CAST<int8_t*>(#{pointerExpr})" |
| end |
| def int16MemRef |
| "*CAST<int16_t*>(#{pointerExpr})" |
| end |
| def int32MemRef |
| "*CAST<int32_t*>(#{pointerExpr})" |
| end |
| def int64MemRef |
| "*CAST<int64_t*>(#{pointerExpr})" |
| end |
| def intMemRef |
| "*CAST<intptr_t*>(#{pointerExpr})" |
| end |
| def uint8MemRef |
| "*CAST<uint8_t*>(#{pointerExpr})" |
| end |
| def uint16MemRef |
| "*CAST<uint16_t*>(#{pointerExpr})" |
| end |
| def uint32MemRef |
| "*CAST<uint32_t*>(#{pointerExpr})" |
| end |
| def uint64MemRef |
| "*CAST<uint64_t*>(#{pointerExpr})" |
| end |
| def uintMemRef |
| "*CAST<uintptr_t*>(#{pointerExpr})" |
| end |
| def nativeFuncMemRef |
| "*CAST<NativeFunction*>(#{pointerExpr})" |
| end |
| def opcodeMemRef |
| "*CAST<Opcode*>(#{pointerExpr})" |
| end |
| def dblMemRef |
| "*CAST<double*>(#{pointerExpr})" |
| end |
| end |
| |
| class BaseIndex |
| def dump |
| "[#{base.dump}, #{offset.dump}, #{index.dump} << #{scaleShift}]" |
| end |
| def clValue(type=:int) |
| case type |
| when :int8; int8MemRef |
| when :int32; int32MemRef |
| when :int64; int64MemRef |
| when :int; intMemRef |
| when :uint8; uint8MemRef |
| when :uint32; uint32MemRef |
| when :uint64; uint64MemRef |
| when :uint; uintMemRef |
| when :opcode; opcodeMemRef |
| else |
| raise "Unexpected BaseIndex type: #{type}" |
| end |
| end |
| def pointerExpr |
| if base.is_a? RegisterID and base.name == "sp" |
| offsetValue = "(#{index.clValue} << #{scaleShift}) + #{offset.clValue})" |
| "(ASSERT(#{offsetValue} == offsetof(JITStackFrame, globalData)), &sp->globalData)" |
| else |
| "#{base.clValue(:int8Ptr)} + (#{index.clValue} << #{scaleShift}) + #{offset.clValue}" |
| end |
| end |
| def int8MemRef |
| "*CAST<int8_t*>(#{pointerExpr})" |
| end |
| def int16MemRef |
| "*CAST<int16_t*>(#{pointerExpr})" |
| end |
| def int32MemRef |
| "*CAST<int32_t*>(#{pointerExpr})" |
| end |
| def int64MemRef |
| "*CAST<int64_t*>(#{pointerExpr})" |
| end |
| def intMemRef |
| "*CAST<intptr_t*>(#{pointerExpr})" |
| end |
| def uint8MemRef |
| "*CAST<uint8_t*>(#{pointerExpr})" |
| end |
| def uint16MemRef |
| "*CAST<uint16_t*>(#{pointerExpr})" |
| end |
| def uint32MemRef |
| "*CAST<uint32_t*>(#{pointerExpr})" |
| end |
| def uint64MemRef |
| "*CAST<uint64_t*>(#{pointerExpr})" |
| end |
| def uintMemRef |
| "*CAST<uintptr_t*>(#{pointerExpr})" |
| end |
| def opcodeMemRef |
| "*CAST<Opcode*>(#{pointerExpr})" |
| end |
| def dblMemRef |
| "*CAST<double*>(#{pointerExpr})" |
| end |
| end |
| |
| class AbsoluteAddress |
| def dump |
| "#{codeOriginString}" |
| end |
| def clValue |
| dump |
| end |
| end |
| |
| |
| # |
| # Lea support. |
| # |
| |
| class Address |
| def cloopEmitLea(destination, type) |
| if destination == base |
| $asm.putc "#{destination.clValue(:int8Ptr)} += #{offset.clValue(type)};" |
| else |
| $asm.putc "#{destination.clValue(:int8Ptr)} = #{base.clValue(:int8Ptr)} + #{offset.clValue(type)};" |
| end |
| end |
| end |
| |
| class BaseIndex |
| def cloopEmitLea(destination, type) |
| raise "Malformed BaseIndex, offset should be zero at #{codeOriginString}" unless offset.value == 0 |
| $asm.putc "#{destination.clValue(:int8Ptr)} = #{base.clValue(:int8Ptr)} + (#{index.clValue} << #{scaleShift});" |
| end |
| end |
| |
| # |
| # Actual lowering code follows. |
| # |
| |
| class Sequence |
| def getModifiedListC_LOOP |
| myList = @list |
| |
| # Verify that we will only see instructions and labels. |
| myList.each { |
| | node | |
| unless node.is_a? Instruction or |
| node.is_a? Label or |
| node.is_a? LocalLabel or |
| node.is_a? Skip |
| raise "Unexpected #{node.inspect} at #{node.codeOrigin}" |
| end |
| } |
| |
| return myList |
| end |
| end |
| |
| def clOperands(operands) |
| operands.map{|v| v.dump}.join(", ") |
| end |
| |
| |
| def cloopEmitOperation(operands, type, operator) |
| raise unless type == :int || type == :uint || type == :int32 || type == :uint32 || \ |
| type == :int64 || type == :uint64 || type == :double |
| if operands.size == 3 |
| $asm.putc "#{operands[2].clValue(type)} = #{operands[1].clValue(type)} #{operator} #{operands[0].clValue(type)};" |
| if operands[2].is_a? RegisterID and (type == :int32 or type == :uint32) |
| $asm.putc "#{operands[2].dump}.clearHighWord();" # Just clear it. It does nothing on the 32-bit port. |
| end |
| else |
| raise unless operands.size == 2 |
| raise unless not operands[1].is_a? Immediate |
| $asm.putc "#{operands[1].clValue(type)} = #{operands[1].clValue(type)} #{operator} #{operands[0].clValue(type)};" |
| if operands[1].is_a? RegisterID and (type == :int32 or type == :uint32) |
| $asm.putc "#{operands[1].dump}.clearHighWord();" # Just clear it. It does nothing on the 32-bit port. |
| end |
| end |
| end |
| |
| def cloopEmitShiftOperation(operands, type, operator) |
| raise unless type == :int || type == :uint || type == :int32 || type == :uint32 || type == :int64 || type == :uint64 |
| if operands.size == 3 |
| $asm.putc "#{operands[2].clValue(type)} = #{operands[1].clValue(type)} #{operator} (#{operands[0].clValue(:int)} & 0x1f);" |
| if operands[2].is_a? RegisterID and (type == :int32 or type == :uint32) |
| $asm.putc "#{operands[2].dump}.clearHighWord();" # Just clear it. It does nothing on the 32-bit port. |
| end |
| else |
| raise unless operands.size == 2 |
| raise unless not operands[1].is_a? Immediate |
| $asm.putc "#{operands[1].clValue(type)} = #{operands[1].clValue(type)} #{operator} (#{operands[0].clValue(:int)} & 0x1f);" |
| if operands[1].is_a? RegisterID and (type == :int32 or type == :uint32) |
| $asm.putc "#{operands[1].dump}.clearHighWord();" # Just clear it. It does nothing on the 32-bit port. |
| end |
| end |
| end |
| |
| def cloopEmitUnaryOperation(operands, type, operator) |
| raise unless type == :int || type == :uint || type == :int32 || type == :uint32 || type == :int64 || type == :uint64 |
| raise unless operands.size == 1 |
| raise unless not operands[0].is_a? Immediate |
| $asm.putc "#{operands[0].clValue(type)} = #{operator}#{operands[0].clValue(type)};" |
| if operands[0].is_a? RegisterID and (type == :int32 or type == :uint32) |
| $asm.putc "#{operands[0].dump}.clearHighWord();" # Just clear it. It does nothing on the 32-bit port. |
| end |
| end |
| |
| def cloopEmitCompareDoubleWithNaNCheckAndBranch(operands, condition) |
| $asm.putc "if (isnan(#{operands[0].clValue(:double)}) || isnan(#{operands[1].clValue(:double)})" |
| $asm.putc " || (#{operands[0].clValue(:double)} #{condition} #{operands[1].clValue(:double)}))" |
| $asm.putc " goto #{operands[2].cLabel};" |
| end |
| |
| |
| def cloopEmitCompareAndSet(operands, type, comparator) |
| # The result is a boolean. Hence, it doesn't need to be based on the type |
| # of the arguments being compared. |
| $asm.putc "#{operands[2].clValue} = (#{operands[0].clValue(type)} #{comparator} #{op2 = operands[1].clValue(type)});" |
| end |
| |
| |
| def cloopEmitCompareAndBranch(operands, type, comparator) |
| $asm.putc "if (#{operands[0].clValue(type)} #{comparator} #{operands[1].clValue(type)})" |
| $asm.putc " goto #{operands[2].cLabel};" |
| end |
| |
| |
| # conditionTest should contain a string that provides a comparator and a RHS |
| # value e.g. "< 0". |
| def cloopGenerateConditionExpression(operands, type, conditionTest) |
| op1 = operands[0].clValue(type) |
| |
| # The operands must consist of 2 or 3 values. |
| case operands.size |
| when 2 # Just test op1 against the conditionTest. |
| lhs = op1 |
| when 3 # Mask op1 with op2 before testing against the conditionTest. |
| lhs = "(#{op1} & #{operands[1].clValue(type)})" |
| else |
| raise "Expected 2 or 3 operands but got #{operands.size} at #{codeOriginString}" |
| end |
| |
| "#{lhs} #{conditionTest}" |
| end |
| |
| # conditionTest should contain a string that provides a comparator and a RHS |
| # value e.g. "< 0". |
| def cloopEmitTestAndBranchIf(operands, type, conditionTest, branchTarget) |
| conditionExpr = cloopGenerateConditionExpression(operands, type, conditionTest) |
| $asm.putc "if (#{conditionExpr})" |
| $asm.putc " goto #{branchTarget};" |
| end |
| |
| def cloopEmitTestSet(operands, type, conditionTest) |
| # The result is a boolean condition. Hence, the result type is always an |
| # int. The passed in type is only used for the values being tested in |
| # the condition test. |
| conditionExpr = cloopGenerateConditionExpression(operands, type, conditionTest) |
| $asm.putc "#{operands[-1].clValue} = (#{conditionExpr});" |
| end |
| |
| def cloopEmitOpAndBranch(operands, operator, type, conditionTest) |
| case type |
| when :int; tempType = "intptr_t" |
| when :int32; tempType = "int32_t" |
| when :int64; tempType = "int64_t" |
| else |
| raise "Unimplemented type" |
| end |
| |
| op1 = operands[0].clValue(type) |
| op2 = operands[1].clValue(type) |
| |
| $asm.putc "{" |
| $asm.putc " #{tempType} temp = #{op2} #{operator} #{op1};" |
| $asm.putc " if (temp #{conditionTest})" |
| $asm.putc " goto #{operands[2].cLabel};" |
| $asm.putc " #{op2} = temp;" |
| $asm.putc "}" |
| end |
| |
| def cloopAddOverflowTest(operands, type) |
| case type |
| when :int32 |
| tempType = "int32_t" |
| else |
| raise "Unimplemented type" |
| end |
| |
| $asm.putc " #{tempType} a = #{operands[0].clValue(type)};" |
| $asm.putc " #{tempType} b = #{operands[1].clValue(type)};" |
| $asm.putc " #{tempType} unused_result;" |
| "(!WTF::safeAdd(b, a, unused_result))" |
| end |
| |
| def cloopSubOverflowTest(operands, type) |
| case type |
| when :int32 |
| tempType = "int32_t" |
| else |
| raise "Unimplemented type" |
| end |
| |
| $asm.putc " #{tempType} a = #{operands[0].clValue(type)};" |
| $asm.putc " #{tempType} b = #{operands[1].clValue(type)};" |
| $asm.putc " #{tempType} unused_result;" |
| "(!WTF::safeSub(b, a, unused_result))" |
| end |
| |
| def cloopMulOverflowTest(operands, type) |
| case type |
| when :int32 |
| tempType = "uint32_t" |
| else |
| raise "Unimplemented type" |
| end |
| $asm.putc " #{tempType} a = #{operands[0].clValue(type)};" |
| $asm.putc " #{tempType} b = #{operands[1].clValue(type)};" |
| "((b | a) >> 15)" |
| end |
| |
| def cloopEmitOpAndBranchIfOverflow(operands, operator, type) |
| $asm.putc "{" |
| |
| # Emit the overflow test based on the operands and the type: |
| case operator |
| when "+"; overflowTest = cloopAddOverflowTest(operands, type) |
| when "-"; overflowTest = cloopSubOverflowTest(operands, type) |
| when "*"; overflowTest = cloopMulOverflowTest(operands, type) |
| else |
| raise "Unimplemented opeartor" |
| end |
| |
| $asm.putc " if #{overflowTest} {" |
| $asm.putc " goto #{operands[2].cLabel};" |
| $asm.putc " }" |
| $asm.putc " #{operands[1].clValue(type)} = #{operands[1].clValue(type)} #{operator} #{operands[0].clValue(type)};" |
| $asm.putc "}" |
| end |
| |
| # operands: callTarget, currentFrame, currentPC |
| def cloopEmitCallSlowPath(operands) |
| $asm.putc "{" |
| $asm.putc " ExecState* exec = CAST<ExecState*>(#{operands[1].clValue(:voidPtr)});" |
| $asm.putc " Instruction* pc = CAST<Instruction*>(#{operands[2].clValue(:voidPtr)});" |
| $asm.putc " SlowPathReturnType result = #{operands[0].cLabel}(exec, pc);" |
| $asm.putc " LLInt::decodeResult(result, t0.instruction, t1.execState);" |
| $asm.putc "}" |
| end |
| |
| class Instruction |
| def lowerC_LOOP |
| $asm.codeOrigin codeOriginString if $enableCodeOriginComments |
| $asm.annotation annotation if $enableInstrAnnotations && (opcode != "cloopDo") |
| |
| case opcode |
| when "addi" |
| cloopEmitOperation(operands, :int32, "+") |
| when "addq" |
| cloopEmitOperation(operands, :int64, "+") |
| when "addp" |
| cloopEmitOperation(operands, :int, "+") |
| |
| when "andi" |
| cloopEmitOperation(operands, :int32, "&") |
| when "andq" |
| cloopEmitOperation(operands, :int64, "&") |
| when "andp" |
| cloopEmitOperation(operands, :int, "&") |
| |
| when "ori" |
| cloopEmitOperation(operands, :int32, "|") |
| when "orq" |
| cloopEmitOperation(operands, :int64, "|") |
| when "orp" |
| cloopEmitOperation(operands, :int, "|") |
| |
| when "xori" |
| cloopEmitOperation(operands, :int32, "^") |
| when "xorq" |
| cloopEmitOperation(operands, :int64, "^") |
| when "xorp" |
| cloopEmitOperation(operands, :int, "^") |
| |
| when "lshifti" |
| cloopEmitShiftOperation(operands, :int32, "<<") |
| when "lshiftq" |
| cloopEmitShiftOperation(operands, :int64, "<<") |
| when "lshiftp" |
| cloopEmitShiftOperation(operands, :int, "<<") |
| |
| when "rshifti" |
| cloopEmitShiftOperation(operands, :int32, ">>") |
| when "rshiftq" |
| cloopEmitShiftOperation(operands, :int64, ">>") |
| when "rshiftp" |
| cloopEmitShiftOperation(operands, :int, ">>") |
| |
| when "urshifti" |
| cloopEmitShiftOperation(operands, :uint32, ">>") |
| when "urshiftq" |
| cloopEmitShiftOperation(operands, :uint64, ">>") |
| when "urshiftp" |
| cloopEmitShiftOperation(operands, :uint, ">>") |
| |
| when "muli" |
| cloopEmitOperation(operands, :int32, "*") |
| when "mulq" |
| cloopEmitOperation(operands, :int64, "*") |
| when "mulp" |
| cloopEmitOperation(operands, :int, "*") |
| |
| when "subi" |
| cloopEmitOperation(operands, :int32, "-") |
| when "subq" |
| cloopEmitOperation(operands, :int64, "-") |
| when "subp" |
| cloopEmitOperation(operands, :int, "-") |
| |
| when "negi" |
| cloopEmitUnaryOperation(operands, :int32, "-") |
| when "negq" |
| cloopEmitUnaryOperation(operands, :int64, "-") |
| when "negp" |
| cloopEmitUnaryOperation(operands, :int, "-") |
| |
| when "noti" |
| cloopEmitUnaryOperation(operands, :int32, "!") |
| |
| when "loadi" |
| $asm.putc "#{operands[1].clValue(:uint)} = #{operands[0].uint32MemRef};" |
| # There's no need to call clearHighWord() here because the above will |
| # automatically take care of 0 extension. |
| when "loadis" |
| $asm.putc "#{operands[1].clValue(:int)} = #{operands[0].int32MemRef};" |
| when "loadq" |
| $asm.putc "#{operands[1].clValue(:int64)} = #{operands[0].int64MemRef};" |
| when "loadp" |
| $asm.putc "#{operands[1].clValue(:int)} = #{operands[0].intMemRef};" |
| when "storei" |
| $asm.putc "#{operands[1].int32MemRef} = #{operands[0].clValue(:int32)};" |
| when "storeq" |
| $asm.putc "#{operands[1].int64MemRef} = #{operands[0].clValue(:int64)};" |
| when "storep" |
| $asm.putc "#{operands[1].intMemRef} = #{operands[0].clValue(:int)};" |
| when "loadb" |
| $asm.putc "#{operands[1].clValue(:int)} = #{operands[0].uint8MemRef};" |
| when "loadbs" |
| $asm.putc "#{operands[1].clValue(:int)} = #{operands[0].int8MemRef};" |
| when "storeb" |
| $asm.putc "#{operands[1].uint8MemRef} = #{operands[0].clValue(:int8)};" |
| when "loadh" |
| $asm.putc "#{operands[1].clValue(:int)} = #{operands[0].uint16MemRef};" |
| when "loadhs" |
| $asm.putc "#{operands[1].clValue(:int)} = #{operands[0].int16MemRef};" |
| when "storeh" |
| $asm.putc "*#{operands[1].uint16MemRef} = #{operands[0].clValue(:int16)};" |
| when "loadd" |
| $asm.putc "#{operands[1].clValue(:double)} = #{operands[0].dblMemRef};" |
| when "stored" |
| $asm.putc "#{operands[1].dblMemRef} = #{operands[0].clValue(:double)};" |
| |
| when "addd" |
| cloopEmitOperation(operands, :double, "+") |
| when "divd" |
| cloopEmitOperation(operands, :double, "/") |
| when "subd" |
| cloopEmitOperation(operands, :double, "-") |
| when "muld" |
| cloopEmitOperation(operands, :double, "*") |
| |
| # Convert an int value to its double equivalent, and store it in a double register. |
| when "ci2d" |
| $asm.putc "#{operands[1].clValue(:double)} = #{operands[0].clValue(:int32)};" |
| |
| when "bdeq" |
| cloopEmitCompareAndBranch(operands, :double, "==") |
| when "bdneq" |
| cloopEmitCompareAndBranch(operands, :double, "!=") |
| when "bdgt" |
| cloopEmitCompareAndBranch(operands, :double, ">"); |
| when "bdgteq" |
| cloopEmitCompareAndBranch(operands, :double, ">="); |
| when "bdlt" |
| cloopEmitCompareAndBranch(operands, :double, "<"); |
| when "bdlteq" |
| cloopEmitCompareAndBranch(operands, :double, "<="); |
| |
| when "bdequn" |
| cloopEmitCompareDoubleWithNaNCheckAndBranch(operands, "==") |
| when "bdnequn" |
| cloopEmitCompareDoubleWithNaNCheckAndBranch(operands, "!=") |
| when "bdgtun" |
| cloopEmitCompareDoubleWithNaNCheckAndBranch(operands, ">") |
| when "bdgtequn" |
| cloopEmitCompareDoubleWithNaNCheckAndBranch(operands, ">=") |
| when "bdltun" |
| cloopEmitCompareDoubleWithNaNCheckAndBranch(operands, "<") |
| when "bdltequn" |
| cloopEmitCompareDoubleWithNaNCheckAndBranch(operands, "<=") |
| |
| when "td2i" |
| $asm.putc "#{operands[1].clValue(:int)} = #{operands[0].clValue(:double)};" |
| $asm.putc "#{operands[1].dump}.clearHighWord();" |
| |
| when "bcd2i" # operands: srcDbl dstInt slowPath |
| $asm.putc "{" |
| $asm.putc " double d = #{operands[0].clValue(:double)};" |
| $asm.putc " const int32_t asInt32 = int32_t(d);" |
| $asm.putc " if (asInt32 != d || (!asInt32 && signbit(d))) // true for -0.0" |
| $asm.putc " goto #{operands[2].cLabel};" |
| $asm.putc " #{operands[1].clValue} = asInt32;" |
| $asm.putc " #{operands[1].dump}.clearHighWord();" |
| $asm.putc "}" |
| |
| when "move" |
| $asm.putc "#{operands[1].clValue(:int)} = #{operands[0].clValue(:int)};" |
| when "sxi2q" |
| $asm.putc "#{operands[1].clValue(:int64)} = #{operands[0].clValue(:int32)};" |
| when "zxi2q" |
| $asm.putc "#{operands[1].clValue(:uint64)} = #{operands[0].clValue(:uint32)};" |
| when "nop" |
| $asm.putc "// nop" |
| when "bbeq" |
| cloopEmitCompareAndBranch(operands, :int8, "==") |
| when "bieq" |
| cloopEmitCompareAndBranch(operands, :int32, "==") |
| when "bqeq" |
| cloopEmitCompareAndBranch(operands, :int64, "==") |
| when "bpeq" |
| cloopEmitCompareAndBranch(operands, :int, "==") |
| |
| when "bbneq" |
| cloopEmitCompareAndBranch(operands, :int8, "!=") |
| when "bineq" |
| cloopEmitCompareAndBranch(operands, :int32, "!=") |
| when "bqneq" |
| cloopEmitCompareAndBranch(operands, :int64, "!=") |
| when "bpneq" |
| cloopEmitCompareAndBranch(operands, :int, "!=") |
| |
| when "bba" |
| cloopEmitCompareAndBranch(operands, :uint8, ">") |
| when "bia" |
| cloopEmitCompareAndBranch(operands, :uint32, ">") |
| when "bqa" |
| cloopEmitCompareAndBranch(operands, :uint64, ">") |
| when "bpa" |
| cloopEmitCompareAndBranch(operands, :uint, ">") |
| |
| when "bbaeq" |
| cloopEmitCompareAndBranch(operands, :uint8, ">=") |
| when "biaeq" |
| cloopEmitCompareAndBranch(operands, :uint32, ">=") |
| when "bqaeq" |
| cloopEmitCompareAndBranch(operands, :uint64, ">=") |
| when "bpaeq" |
| cloopEmitCompareAndBranch(operands, :uint, ">=") |
| |
| when "bbb" |
| cloopEmitCompareAndBranch(operands, :uint8, "<") |
| when "bib" |
| cloopEmitCompareAndBranch(operands, :uint32, "<") |
| when "bqb" |
| cloopEmitCompareAndBranch(operands, :uint64, "<") |
| when "bpb" |
| cloopEmitCompareAndBranch(operands, :uint, "<") |
| |
| when "bbbeq" |
| cloopEmitCompareAndBranch(operands, :uint8, "<=") |
| when "bibeq" |
| cloopEmitCompareAndBranch(operands, :uint32, "<=") |
| when "bqbeq" |
| cloopEmitCompareAndBranch(operands, :uint64, "<=") |
| when "bpbeq" |
| cloopEmitCompareAndBranch(operands, :uint, "<=") |
| |
| when "bbgt" |
| cloopEmitCompareAndBranch(operands, :int8, ">") |
| when "bigt" |
| cloopEmitCompareAndBranch(operands, :int32, ">") |
| when "bqgt" |
| cloopEmitCompareAndBranch(operands, :int64, ">") |
| when "bpgt" |
| cloopEmitCompareAndBranch(operands, :int, ">") |
| |
| when "bbgteq" |
| cloopEmitCompareAndBranch(operands, :int8, ">=") |
| when "bigteq" |
| cloopEmitCompareAndBranch(operands, :int32, ">=") |
| when "bqgteq" |
| cloopEmitCompareAndBranch(operands, :int64, ">=") |
| when "bpgteq" |
| cloopEmitCompareAndBranch(operands, :int, ">=") |
| |
| when "bblt" |
| cloopEmitCompareAndBranch(operands, :int8, "<") |
| when "bilt" |
| cloopEmitCompareAndBranch(operands, :int32, "<") |
| when "bqlt" |
| cloopEmitCompareAndBranch(operands, :int64, "<") |
| when "bplt" |
| cloopEmitCompareAndBranch(operands, :int, "<") |
| |
| when "bblteq" |
| cloopEmitCompareAndBranch(operands, :int8, "<=") |
| when "bilteq" |
| cloopEmitCompareAndBranch(operands, :int32, "<=") |
| when "bqlteq" |
| cloopEmitCompareAndBranch(operands, :int64, "<=") |
| when "bplteq" |
| cloopEmitCompareAndBranch(operands, :int, "<=") |
| |
| when "btbz" |
| cloopEmitTestAndBranchIf(operands, :int8, "== 0", operands[-1].cLabel) |
| when "btiz" |
| cloopEmitTestAndBranchIf(operands, :int32, "== 0", operands[-1].cLabel) |
| when "btqz" |
| cloopEmitTestAndBranchIf(operands, :int64, "== 0", operands[-1].cLabel) |
| when "btpz" |
| cloopEmitTestAndBranchIf(operands, :int, "== 0", operands[-1].cLabel) |
| |
| when "btbnz" |
| cloopEmitTestAndBranchIf(operands, :int8, "!= 0", operands[-1].cLabel) |
| when "btinz" |
| cloopEmitTestAndBranchIf(operands, :int32, "!= 0", operands[-1].cLabel) |
| when "btqnz" |
| cloopEmitTestAndBranchIf(operands, :int64, "!= 0", operands[-1].cLabel) |
| when "btpnz" |
| cloopEmitTestAndBranchIf(operands, :int, "!= 0", operands[-1].cLabel) |
| |
| when "btbs" |
| cloopEmitTestAndBranchIf(operands, :int8, "< 0", operands[-1].cLabel) |
| when "btis" |
| cloopEmitTestAndBranchIf(operands, :int32, "< 0", operands[-1].cLabel) |
| when "btqs" |
| cloopEmitTestAndBranchIf(operands, :int64, "< 0", operands[-1].cLabel) |
| when "btps" |
| cloopEmitTestAndBranchIf(operands, :int, "< 0", operands[-1].cLabel) |
| |
| # For jmp, we do not want to assume that we have COMPUTED_GOTO support. |
| # Fortunately, the only times we should ever encounter indirect jmps is |
| # when the jmp target is a CLoop opcode (by design). |
| # |
| # Hence, we check if the jmp target is a known label reference. If so, |
| # we can emit a goto directly. If it is not a known target, then we set |
| # the target in the opcode, and dispatch to it via whatever dispatch |
| # mechanism is in used. |
| when "jmp" |
| if operands[0].is_a? LocalLabelReference or operands[0].is_a? LabelReference |
| # Handles jumps local or global labels. |
| $asm.putc "goto #{operands[0].cLabel};" |
| else |
| # Handles jumps to some computed target. |
| # NOTE: must be an opcode handler or a llint glue helper. |
| $asm.putc "opcode = #{operands[0].clValue(:opcode)};" |
| $asm.putc "DISPATCH_OPCODE();" |
| end |
| |
| when "call" |
| $asm.putc "CRASH(); // generic call instruction not supported by design!" |
| when "break" |
| $asm.putc "CRASH(); // break instruction not implemented." |
| when "ret" |
| $asm.putc "goto doReturnHelper;" |
| |
| when "cbeq" |
| cloopEmitCompareAndSet(operands, :uint8, "==") |
| when "cieq" |
| cloopEmitCompareAndSet(operands, :uint32, "==") |
| when "cqeq" |
| cloopEmitCompareAndSet(operands, :uint64, "==") |
| when "cpeq" |
| cloopEmitCompareAndSet(operands, :uint, "==") |
| |
| when "cbneq" |
| cloopEmitCompareAndSet(operands, :uint8, "!=") |
| when "cineq" |
| cloopEmitCompareAndSet(operands, :uint32, "!=") |
| when "cqneq" |
| cloopEmitCompareAndSet(operands, :uint64, "!=") |
| when "cpneq" |
| cloopEmitCompareAndSet(operands, :uint, "!=") |
| |
| when "cba" |
| cloopEmitCompareAndSet(operands, :uint8, ">") |
| when "cia" |
| cloopEmitCompareAndSet(operands, :uint32, ">") |
| when "cqa" |
| cloopEmitCompareAndSet(operands, :uint64, ">") |
| when "cpa" |
| cloopEmitCompareAndSet(operands, :uint, ">") |
| |
| when "cbaeq" |
| cloopEmitCompareAndSet(operands, :uint8, ">=") |
| when "ciaeq" |
| cloopEmitCompareAndSet(operands, :uint32, ">=") |
| when "cqaeq" |
| cloopEmitCompareAndSet(operands, :uint64, ">=") |
| when "cpaeq" |
| cloopEmitCompareAndSet(operands, :uint, ">=") |
| |
| when "cbb" |
| cloopEmitCompareAndSet(operands, :uint8, "<") |
| when "cib" |
| cloopEmitCompareAndSet(operands, :uint32, "<") |
| when "cqb" |
| cloopEmitCompareAndSet(operands, :uint64, "<") |
| when "cpb" |
| cloopEmitCompareAndSet(operands, :uint, "<") |
| |
| when "cbbeq" |
| cloopEmitCompareAndSet(operands, :uint8, "<=") |
| when "cibeq" |
| cloopEmitCompareAndSet(operands, :uint32, "<=") |
| when "cqbeq" |
| cloopEmitCompareAndSet(operands, :uint64, "<=") |
| when "cpbeq" |
| cloopEmitCompareAndSet(operands, :uint, "<=") |
| |
| when "cbgt" |
| cloopEmitCompareAndSet(operands, :int8, ">") |
| when "cigt" |
| cloopEmitCompareAndSet(operands, :int32, ">") |
| when "cqgt" |
| cloopEmitCompareAndSet(operands, :int64, ">") |
| when "cpgt" |
| cloopEmitCompareAndSet(operands, :int, ">") |
| |
| when "cbgteq" |
| cloopEmitCompareAndSet(operands, :int8, ">=") |
| when "cigteq" |
| cloopEmitCompareAndSet(operands, :int32, ">=") |
| when "cqgteq" |
| cloopEmitCompareAndSet(operands, :int64, ">=") |
| when "cpgteq" |
| cloopEmitCompareAndSet(operands, :int, ">=") |
| |
| when "cblt" |
| cloopEmitCompareAndSet(operands, :int8, "<") |
| when "cilt" |
| cloopEmitCompareAndSet(operands, :int32, "<") |
| when "cqlt" |
| cloopEmitCompareAndSet(operands, :int64, "<") |
| when "cplt" |
| cloopEmitCompareAndSet(operands, :int, "<") |
| |
| when "cblteq" |
| cloopEmitCompareAndSet(operands, :int8, "<=") |
| when "cilteq" |
| cloopEmitCompareAndSet(operands, :int32, "<=") |
| when "cqlteq" |
| cloopEmitCompareAndSet(operands, :int64, "<=") |
| when "cplteq" |
| cloopEmitCompareAndSet(operands, :int, "<=") |
| |
| when "tbs" |
| cloopEmitTestSet(operands, :int8, "< 0") |
| when "tis" |
| cloopEmitTestSet(operands, :int32, "< 0") |
| when "tqs" |
| cloopEmitTestSet(operands, :int64, "< 0") |
| when "tps" |
| cloopEmitTestSet(operands, :int, "< 0") |
| |
| when "tbz" |
| cloopEmitTestSet(operands, :int8, "== 0") |
| when "tiz" |
| cloopEmitTestSet(operands, :int32, "== 0") |
| when "tqz" |
| cloopEmitTestSet(operands, :int64, "== 0") |
| when "tpz" |
| cloopEmitTestSet(operands, :int, "== 0") |
| |
| when "tbnz" |
| cloopEmitTestSet(operands, :int8, "!= 0") |
| when "tinz" |
| cloopEmitTestSet(operands, :int32, "!= 0") |
| when "tqnz" |
| cloopEmitTestSet(operands, :int64, "!= 0") |
| when "tpnz" |
| cloopEmitTestSet(operands, :int, "!= 0") |
| |
| # 64-bit instruction: cdqi (based on X64) |
| # Sign extends the lower 32 bits of t0, but put the sign extension into |
| # the lower 32 bits of t1. Leave the upper 32 bits of t0 and t1 unchanged. |
| when "cdqi" |
| $asm.putc "{" |
| $asm.putc " int64_t temp = t0.i32; // sign extend the low 32bit" |
| $asm.putc " t0.i32 = temp; // low word" |
| $asm.putc " t0.clearHighWord();" |
| $asm.putc " t1.i32 = uint64_t(temp) >> 32; // high word" |
| $asm.putc " t1.clearHighWord();" |
| $asm.putc "}" |
| |
| # 64-bit instruction: idivi op1 (based on X64) |
| # Divide a 64-bit integer numerator by the specified denominator. |
| # The numerator is specified in t0 and t1 as follows: |
| # 1. low 32 bits of the numerator is in the low 32 bits of t0. |
| # 2. high 32 bits of the numerator is in the low 32 bits of t1. |
| # |
| # The resultant quotient is a signed 32-bit int, and is to be stored |
| # in the lower 32 bits of t0. |
| # The resultant remainder is a signed 32-bit int, and is to be stored |
| # in the lower 32 bits of t1. |
| when "idivi" |
| # Divide t1,t0 (EDX,EAX) by the specified arg, and store the remainder in t1, |
| # and quotient in t0: |
| $asm.putc "{" |
| $asm.putc " int64_t dividend = (int64_t(t1.u32) << 32) | t0.u32;" |
| $asm.putc " int64_t divisor = #{operands[0].clValue(:int)};" |
| $asm.putc " t1.i32 = dividend % divisor; // remainder" |
| $asm.putc " t1.clearHighWord();" |
| $asm.putc " t0.i32 = dividend / divisor; // quotient" |
| $asm.putc " t0.clearHighWord();" |
| $asm.putc "}" |
| |
| # 32-bit instruction: fii2d int32LoOp int32HiOp dblOp (based on ARMv7) |
| # Decode 2 32-bit ints (low and high) into a 64-bit double. |
| when "fii2d" |
| $asm.putc "#{operands[2].clValue(:double)} = Ints2Double(#{operands[0].clValue(:uint32)}, #{operands[1].clValue(:uint32)});" |
| |
| # 32-bit instruction: f2dii dblOp int32LoOp int32HiOp (based on ARMv7) |
| # Encode a 64-bit double into 2 32-bit ints (low and high). |
| when "fd2ii" |
| $asm.putc "Double2Ints(#{operands[0].clValue(:double)}, #{operands[1].clValue}, #{operands[2].clValue});" |
| |
| # 64-bit instruction: fq2d int64Op dblOp (based on X64) |
| # Copy a bit-encoded double in a 64-bit int register to a double register. |
| when "fq2d" |
| $asm.putc "#{operands[1].clValue(:double)} = #{operands[0].clValue(:castToDouble)};" |
| |
| # 64-bit instruction: fd2q dblOp int64Op (based on X64 instruction set) |
| # Copy a double as a bit-encoded double into a 64-bit int register. |
| when "fd2q" |
| $asm.putc "#{operands[1].clValue(:int64)} = #{operands[0].clValue(:castToInt64)};" |
| |
| when "leai" |
| operands[0].cloopEmitLea(operands[1], :int32) |
| when "leap" |
| operands[0].cloopEmitLea(operands[1], :int) |
| |
| when "baddio" |
| cloopEmitOpAndBranchIfOverflow(operands, "+", :int32) |
| when "bsubio" |
| cloopEmitOpAndBranchIfOverflow(operands, "-", :int32) |
| when "bmulio" |
| cloopEmitOpAndBranchIfOverflow(operands, "*", :int32) |
| |
| when "baddis" |
| cloopEmitOpAndBranch(operands, "+", :int32, "< 0") |
| when "baddiz" |
| cloopEmitOpAndBranch(operands, "+", :int32, "== 0") |
| when "baddinz" |
| cloopEmitOpAndBranch(operands, "+", :int32, "!= 0") |
| |
| when "baddqs" |
| cloopEmitOpAndBranch(operands, "+", :int64, "< 0") |
| when "baddqz" |
| cloopEmitOpAndBranch(operands, "+", :int64, "== 0") |
| when "baddqnz" |
| cloopEmitOpAndBranch(operands, "+", :int64, "!= 0") |
| |
| when "baddps" |
| cloopEmitOpAndBranch(operands, "+", :int, "< 0") |
| when "baddpz" |
| cloopEmitOpAndBranch(operands, "+", :int, "== 0") |
| when "baddpnz" |
| cloopEmitOpAndBranch(operands, "+", :int, "!= 0") |
| |
| when "bsubis" |
| cloopEmitOpAndBranch(operands, "-", :int32, "< 0") |
| when "bsubiz" |
| cloopEmitOpAndBranch(operands, "-", :int32, "== 0") |
| when "bsubinz" |
| cloopEmitOpAndBranch(operands, "-", :int32, "!= 0") |
| |
| when "borris" |
| cloopEmitOpAndBranch(operands, "|", :int32, "< 0") |
| when "borriz" |
| cloopEmitOpAndBranch(operands, "|", :int32, "== 0") |
| when "borrinz" |
| cloopEmitOpAndBranch(operands, "|", :int32, "!= 0") |
| |
| # A convenience and compact call to crash because we don't want to use |
| # the generic llint crash mechanism which relies on the availability |
| # of the call instruction (which cannot be implemented in a generic |
| # way, and can be abused if we made it just work for this special case). |
| # Using a special cloopCrash instruction is cleaner. |
| when "cloopCrash" |
| $asm.putc "CRASH();" |
| |
| # We can't rely on the llint JS call mechanism which actually makes |
| # use of the call instruction. Instead, we just implement JS calls |
| # as an opcode dispatch. |
| when "cloopCallJSFunction" |
| $asm.putc "opcode = #{operands[0].clValue(:opcode)};" |
| $asm.putc "DISPATCH_OPCODE();" |
| |
| # We can't do generic function calls with an arbitrary set of args, but |
| # fortunately we don't have to here. All native function calls always |
| # have a fixed prototype of 1 args: the passed ExecState. |
| when "cloopCallNative" |
| $asm.putc "nativeFunc = #{operands[0].clValue(:nativeFunc)};" |
| $asm.putc "functionReturnValue = JSValue::decode(nativeFunc(t0.execState));" |
| $asm.putc "#if USE(JSVALUE32_64)" |
| $asm.putc " t1.i = functionReturnValue.tag();" |
| $asm.putc " t0.i = functionReturnValue.payload();" |
| $asm.putc "#else // USE_JSVALUE64)" |
| $asm.putc " t0.encodedJSValue = JSValue::encode(functionReturnValue);" |
| $asm.putc "#endif // USE_JSVALUE64)" |
| |
| # We can't do generic function calls with an arbitrary set of args, but |
| # fortunately we don't have to here. All slow path function calls always |
| # have a fixed prototype too. See cloopEmitCallSlowPath() for details. |
| when "cloopCallSlowPath" |
| cloopEmitCallSlowPath(operands) |
| |
| # For debugging only. This is used to insert instrumentation into the |
| # generated LLIntAssembly.h during llint development only. Do not use |
| # for production code. |
| when "cloopDo" |
| $asm.putc "#{annotation}" |
| |
| else |
| lowerDefault |
| end |
| end |
| end |