| /* ***** BEGIN LICENSE BLOCK ***** |
| * Version: MPL 1.1/GPL 2.0/LGPL 2.1 |
| * |
| * The contents of this file are subject to the Mozilla Public License Version |
| * 1.1 (the "License"); you may not use this file except in compliance with |
| * the License. You may obtain a copy of the License at |
| * http://www.mozilla.org/MPL/ |
| * |
| * Software distributed under the License is distributed on an "AS IS" basis, |
| * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License |
| * for the specific language governing rights and limitations under the |
| * License. |
| * |
| * The Original Code is the Netscape security libraries. |
| * |
| * The Initial Developer of the Original Code is |
| * Netscape Communications Corporation. |
| * Portions created by the Initial Developer are Copyright (C) 2000 |
| * the Initial Developer. All Rights Reserved. |
| * |
| * Contributor(s): |
| * Ian McGreer <mcgreer@netscape.com> |
| * |
| * Alternatively, the contents of this file may be used under the terms of |
| * either the GNU General Public License Version 2 or later (the "GPL"), or |
| * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), |
| * in which case the provisions of the GPL or the LGPL are applicable instead |
| * of those above. If you wish to allow use of your version of this file only |
| * under the terms of either the GPL or the LGPL, and not to allow others to |
| * use your version of this file under the terms of the MPL, indicate your |
| * decision by deleting the provisions above and replace them with the notice |
| * and other provisions required by the GPL or the LGPL. If you do not delete |
| * the provisions above, a recipient may use your version of this file under |
| * the terms of any one of the MPL, the GPL or the LGPL. |
| * |
| * ***** END LICENSE BLOCK ***** */ |
| |
| #include "net/third_party/mozilla_security_manager/nsPKCS12Blob.h" |
| |
| #include <pk11pub.h> |
| #include <pkcs12.h> |
| #include <p12plcy.h> |
| #include <secerr.h> |
| |
| #include "base/lazy_instance.h" |
| #include "base/logging.h" |
| #include "base/strings/string_util.h" |
| #include "crypto/nss_util_internal.h" |
| #include "net/base/net_errors.h" |
| #include "starboard/memory.h" |
| #include "starboard/types.h" |
| |
| namespace mozilla_security_manager { |
| |
| namespace { |
| |
| // unicodeToItem |
| // |
| // For the NSS PKCS#12 library, must convert PRUnichars (shorts) to |
| // a buffer of octets. Must handle byte order correctly. |
| // TODO: Is there a Mozilla way to do this? In the string lib? |
| void unicodeToItem(const PRUnichar *uni, SECItem *item) |
| { |
| int len = 0; |
| while (uni[len++] != 0); |
| SECITEM_AllocItem(NULL, item, sizeof(PRUnichar) * len); |
| #ifdef IS_LITTLE_ENDIAN |
| int i = 0; |
| for (i=0; i<len; i++) { |
| item->data[2*i ] = (unsigned char )(uni[i] << 8); |
| item->data[2*i+1] = (unsigned char )(uni[i]); |
| } |
| #else |
| SbMemoryCopy(item->data, uni, item->len); |
| #endif |
| } |
| |
| // write_export_data |
| // write bytes to the exported PKCS#12 data buffer |
| void write_export_data(void* arg, const char* buf, unsigned long len) { |
| std::string* dest = reinterpret_cast<std::string*>(arg); |
| dest->append(buf, len); |
| } |
| |
| // nickname_collision |
| // what to do when the nickname collides with one already in the db. |
| // Based on P12U_NicknameCollisionCallback from nss/cmd/pk12util/pk12util.c |
| SECItem* PR_CALLBACK |
| nickname_collision(SECItem *old_nick, PRBool *cancel, void *wincx) |
| { |
| char *nick = NULL; |
| SECItem *ret_nick = NULL; |
| CERTCertificate* cert = (CERTCertificate*)wincx; |
| |
| if (!cancel || !cert) { |
| // pk12util calls this error user cancelled? |
| return NULL; |
| } |
| |
| if (!old_nick) |
| VLOG(1) << "no nickname for cert in PKCS12 file."; |
| |
| nick = CERT_MakeCANickname(cert); |
| if (!nick) { |
| return NULL; |
| } |
| |
| if(old_nick && old_nick->data && old_nick->len && |
| PORT_Strlen(nick) == old_nick->len && |
| !PORT_Strncmp((char *)old_nick->data, nick, old_nick->len)) { |
| PORT_Free(nick); |
| PORT_SetError(SEC_ERROR_IO); |
| return NULL; |
| } |
| |
| VLOG(1) << "using nickname " << nick; |
| ret_nick = PORT_ZNew(SECItem); |
| if(ret_nick == NULL) { |
| PORT_Free(nick); |
| return NULL; |
| } |
| |
| ret_nick->data = (unsigned char *)nick; |
| ret_nick->len = PORT_Strlen(nick); |
| |
| return ret_nick; |
| } |
| |
| // pip_ucs2_ascii_conversion_fn |
| // required to be set by NSS (to do PKCS#12), but since we've already got |
| // unicode make this a no-op. |
| PRBool |
| pip_ucs2_ascii_conversion_fn(PRBool toUnicode, |
| unsigned char *inBuf, |
| unsigned int inBufLen, |
| unsigned char *outBuf, |
| unsigned int maxOutBufLen, |
| unsigned int *outBufLen, |
| PRBool swapBytes) |
| { |
| CHECK_GE(maxOutBufLen, inBufLen); |
| // do a no-op, since I've already got Unicode. Hah! |
| *outBufLen = inBufLen; |
| SbMemoryCopy(outBuf, inBuf, inBufLen); |
| return PR_TRUE; |
| } |
| |
| // Based on nsPKCS12Blob::ImportFromFileHelper. |
| int nsPKCS12Blob_ImportHelper(const char* pkcs12_data, |
| size_t pkcs12_len, |
| const base::string16& password, |
| bool is_extractable, |
| bool try_zero_length_secitem, |
| PK11SlotInfo* slot, |
| net::ScopedCERTCertificateList* imported_certs) { |
| DCHECK(pkcs12_data); |
| DCHECK(slot); |
| int import_result = net::ERR_PKCS12_IMPORT_FAILED; |
| SECStatus srv = SECSuccess; |
| SEC_PKCS12DecoderContext *dcx = NULL; |
| SECItem unicodePw; |
| SECItem attribute_value; |
| CK_BBOOL attribute_data = CK_FALSE; |
| const SEC_PKCS12DecoderItem* decoder_item = NULL; |
| |
| unicodePw.type = siBuffer; |
| unicodePw.len = 0; |
| unicodePw.data = NULL; |
| if (!try_zero_length_secitem) { |
| unicodeToItem(password.c_str(), &unicodePw); |
| } |
| |
| // Initialize the decoder |
| dcx = SEC_PKCS12DecoderStart(&unicodePw, slot, |
| // wincx |
| NULL, |
| // dOpen, dClose, dRead, dWrite, dArg: NULL |
| // specifies default impl using memory buffer. |
| NULL, NULL, NULL, NULL, NULL); |
| if (!dcx) { |
| srv = SECFailure; |
| goto finish; |
| } |
| // feed input to the decoder |
| srv = SEC_PKCS12DecoderUpdate(dcx, |
| (unsigned char*)pkcs12_data, |
| pkcs12_len); |
| if (srv) goto finish; |
| // verify the blob |
| srv = SEC_PKCS12DecoderVerify(dcx); |
| if (srv) goto finish; |
| // validate bags |
| srv = SEC_PKCS12DecoderValidateBags(dcx, nickname_collision); |
| if (srv) goto finish; |
| // import certificate and key |
| srv = SEC_PKCS12DecoderImportBags(dcx); |
| if (srv) goto finish; |
| |
| attribute_value.data = &attribute_data; |
| attribute_value.len = sizeof(attribute_data); |
| |
| srv = SEC_PKCS12DecoderIterateInit(dcx); |
| if (srv) goto finish; |
| |
| if (imported_certs) |
| imported_certs->clear(); |
| |
| // Collect the list of decoded certificates, and mark private keys |
| // non-extractable if needed. |
| while (SEC_PKCS12DecoderIterateNext(dcx, &decoder_item) == SECSuccess) { |
| if (decoder_item->type != SEC_OID_PKCS12_V1_CERT_BAG_ID) |
| continue; |
| |
| net::ScopedCERTCertificate cert( |
| PK11_FindCertFromDERCertItem(slot, decoder_item->der, |
| NULL)); // wincx |
| if (!cert) { |
| LOG(ERROR) << "Could not grab a handle to the certificate in the slot " |
| << "from the corresponding PKCS#12 DER certificate."; |
| continue; |
| } |
| |
| // Once we have determined that the imported certificate has an |
| // associated private key too, only then can we mark the key as |
| // non-extractable. |
| // Iterate through all the imported PKCS12 items and mark any accompanying |
| // private keys as non-extractable. |
| if (decoder_item->hasKey && !is_extractable) { |
| SECKEYPrivateKey* privKey = PK11_FindPrivateKeyFromCert(slot, cert.get(), |
| NULL); // wincx |
| if (privKey) { |
| // Mark the private key as non-extractable. |
| srv = PK11_WriteRawAttribute(PK11_TypePrivKey, privKey, CKA_EXTRACTABLE, |
| &attribute_value); |
| SECKEY_DestroyPrivateKey(privKey); |
| if (srv) { |
| LOG(ERROR) << "Could not set CKA_EXTRACTABLE attribute on private " |
| << "key."; |
| break; |
| } |
| } |
| } |
| |
| // Add the cert to the list |
| if (imported_certs) |
| imported_certs->push_back(std::move(cert)); |
| |
| if (srv) goto finish; |
| } |
| import_result = net::OK; |
| finish: |
| // If srv != SECSuccess, NSS probably set a specific error code. |
| // We should use that error code instead of inventing a new one |
| // for every error possible. |
| if (srv != SECSuccess) { |
| int error = PORT_GetError(); |
| LOG(ERROR) << "PKCS#12 import failed with error " << error; |
| switch (error) { |
| case SEC_ERROR_BAD_PASSWORD: |
| case SEC_ERROR_PKCS12_PRIVACY_PASSWORD_INCORRECT: |
| import_result = net::ERR_PKCS12_IMPORT_BAD_PASSWORD; |
| break; |
| case SEC_ERROR_PKCS12_INVALID_MAC: |
| import_result = net::ERR_PKCS12_IMPORT_INVALID_MAC; |
| break; |
| case SEC_ERROR_BAD_DER: |
| case SEC_ERROR_PKCS12_DECODING_PFX: |
| case SEC_ERROR_PKCS12_CORRUPT_PFX_STRUCTURE: |
| import_result = net::ERR_PKCS12_IMPORT_INVALID_FILE; |
| break; |
| case SEC_ERROR_PKCS12_UNSUPPORTED_MAC_ALGORITHM: |
| case SEC_ERROR_PKCS12_UNSUPPORTED_TRANSPORT_MODE: |
| case SEC_ERROR_PKCS12_UNSUPPORTED_PBE_ALGORITHM: |
| case SEC_ERROR_PKCS12_UNSUPPORTED_VERSION: |
| import_result = net::ERR_PKCS12_IMPORT_UNSUPPORTED; |
| break; |
| default: |
| import_result = net::ERR_PKCS12_IMPORT_FAILED; |
| break; |
| } |
| } |
| // Finish the decoder |
| if (dcx) |
| SEC_PKCS12DecoderFinish(dcx); |
| SECITEM_ZfreeItem(&unicodePw, PR_FALSE); |
| return import_result; |
| } |
| |
| |
| // Attempt to read the CKA_EXTRACTABLE attribute on a private key inside |
| // a token. On success, store the attribute in |extractable| and return |
| // SECSuccess. |
| SECStatus |
| isExtractable(SECKEYPrivateKey *privKey, PRBool *extractable) |
| { |
| SECItem value; |
| SECStatus rv; |
| |
| rv=PK11_ReadRawAttribute(PK11_TypePrivKey, privKey, CKA_EXTRACTABLE, &value); |
| if (rv != SECSuccess) |
| return rv; |
| |
| if ((value.len == 1) && (value.data != NULL)) |
| *extractable = !!(*(CK_BBOOL*)value.data); |
| else |
| rv = SECFailure; |
| SECITEM_FreeItem(&value, PR_FALSE); |
| return rv; |
| } |
| |
| class PKCS12InitSingleton { |
| public: |
| // From the PKCS#12 section of nsNSSComponent::InitializeNSS in |
| // nsNSSComponent.cpp. |
| PKCS12InitSingleton() { |
| // Enable ciphers for PKCS#12 |
| SEC_PKCS12EnableCipher(PKCS12_RC4_40, 1); |
| SEC_PKCS12EnableCipher(PKCS12_RC4_128, 1); |
| SEC_PKCS12EnableCipher(PKCS12_RC2_CBC_40, 1); |
| SEC_PKCS12EnableCipher(PKCS12_RC2_CBC_128, 1); |
| SEC_PKCS12EnableCipher(PKCS12_DES_56, 1); |
| SEC_PKCS12EnableCipher(PKCS12_DES_EDE3_168, 1); |
| SEC_PKCS12SetPreferredCipher(PKCS12_DES_EDE3_168, 1); |
| |
| // Set no-op ascii-ucs2 conversion function to work around weird NSS |
| // interface. Thankfully, PKCS12 appears to be the only thing in NSS that |
| // uses PORT_UCS2_ASCIIConversion, so this doesn't break anything else. |
| PORT_SetUCS2_ASCIIConversionFunction(pip_ucs2_ascii_conversion_fn); |
| } |
| }; |
| |
| // Leaky so it can be initialized on worker threads and because there is no |
| // cleanup necessary. |
| static base::LazyInstance<PKCS12InitSingleton>::Leaky g_pkcs12_init_singleton = |
| LAZY_INSTANCE_INITIALIZER; |
| |
| } // namespace |
| |
| void EnsurePKCS12Init() { |
| g_pkcs12_init_singleton.Get(); |
| } |
| |
| // Based on nsPKCS12Blob::ImportFromFile. |
| int nsPKCS12Blob_Import(PK11SlotInfo* slot, |
| const char* pkcs12_data, |
| size_t pkcs12_len, |
| const base::string16& password, |
| bool is_extractable, |
| net::ScopedCERTCertificateList* imported_certs) { |
| int rv = nsPKCS12Blob_ImportHelper(pkcs12_data, pkcs12_len, password, |
| is_extractable, false, slot, |
| imported_certs); |
| |
| // When the user entered a zero length password: |
| // An empty password should be represented as an empty |
| // string (a SECItem that contains a single terminating |
| // NULL UTF16 character), but some applications use a |
| // zero length SECItem. |
| // We try both variations, zero length item and empty string, |
| // without giving a user prompt when trying the different empty password |
| // flavors. |
| if ((rv == net::ERR_PKCS12_IMPORT_BAD_PASSWORD || |
| rv == net::ERR_PKCS12_IMPORT_INVALID_MAC) && |
| password.empty()) { |
| rv = nsPKCS12Blob_ImportHelper(pkcs12_data, pkcs12_len, password, |
| is_extractable, true, slot, imported_certs); |
| } |
| return rv; |
| } |
| |
| // Based on nsPKCS12Blob::ExportToFile |
| // |
| // Having already loaded the certs, form them into a blob (loading the keys |
| // also), encode the blob, and stuff it into the file. |
| // |
| // TODO: handle slots correctly |
| // mirror "slotToUse" behavior from PSM 1.x |
| // verify the cert array to start off with? |
| // set appropriate error codes |
| int nsPKCS12Blob_Export(std::string* output, |
| const net::ScopedCERTCertificateList& certs, |
| const base::string16& password) { |
| int return_count = 0; |
| SECStatus srv = SECSuccess; |
| SEC_PKCS12ExportContext *ecx = NULL; |
| SEC_PKCS12SafeInfo *certSafe = NULL, *keySafe = NULL; |
| SECItem unicodePw; |
| unicodePw.type = siBuffer; |
| unicodePw.len = 0; |
| unicodePw.data = NULL; |
| |
| int numCertsExported = 0; |
| |
| // get file password (unicode) |
| unicodeToItem(password.c_str(), &unicodePw); |
| |
| // what about slotToUse in psm 1.x ??? |
| // create export context |
| ecx = SEC_PKCS12CreateExportContext(NULL, NULL, NULL /*slot*/, NULL); |
| if (!ecx) { |
| srv = SECFailure; |
| goto finish; |
| } |
| // add password integrity |
| srv = SEC_PKCS12AddPasswordIntegrity(ecx, &unicodePw, SEC_OID_SHA1); |
| if (srv) goto finish; |
| |
| for (size_t i=0; i<certs.size(); i++) { |
| DCHECK(certs[i].get()); |
| CERTCertificate* nssCert = certs[i].get(); |
| DCHECK(nssCert); |
| |
| // We only allow certificate and private key extraction if the corresponding |
| // CKA_EXTRACTABLE private key attribute is set to CK_TRUE. Most hardware |
| // tokens including smartcards enforce this behavior. An internal (soft) |
| // token may ignore this attribute (and hence still be able to export) but |
| // we still refuse to attempt an export. |
| // In addition, some tokens may not support this attribute, in which case |
| // we still attempt the export and let the token implementation dictate |
| // the export behavior. |
| if (nssCert->slot) { |
| SECKEYPrivateKey *privKey=PK11_FindKeyByDERCert(nssCert->slot, |
| nssCert, |
| NULL); // wincx |
| if (privKey) { |
| PRBool privKeyIsExtractable = PR_FALSE; |
| SECStatus rv = isExtractable(privKey, &privKeyIsExtractable); |
| SECKEY_DestroyPrivateKey(privKey); |
| |
| if (rv == SECSuccess && !privKeyIsExtractable) { |
| LOG(ERROR) << "Private key is not extractable"; |
| continue; |
| } |
| } |
| } |
| |
| // XXX this is why, to verify the slot is the same |
| // PK11_FindObjectForCert(nssCert, NULL, slot); |
| // create the cert and key safes |
| keySafe = SEC_PKCS12CreateUnencryptedSafe(ecx); |
| if (!SEC_PKCS12IsEncryptionAllowed() || PK11_IsFIPS()) { |
| certSafe = keySafe; |
| } else { |
| certSafe = SEC_PKCS12CreatePasswordPrivSafe(ecx, &unicodePw, |
| SEC_OID_PKCS12_V2_PBE_WITH_SHA1_AND_40_BIT_RC2_CBC); |
| } |
| if (!certSafe || !keySafe) { |
| LOG(ERROR) << "!certSafe || !keySafe " << certSafe << " " << keySafe; |
| srv = SECFailure; |
| goto finish; |
| } |
| // add the cert and key to the blob |
| srv = SEC_PKCS12AddCertAndKey(ecx, certSafe, NULL, nssCert, |
| CERT_GetDefaultCertDB(), |
| keySafe, NULL, PR_TRUE, &unicodePw, |
| SEC_OID_PKCS12_V2_PBE_WITH_SHA1_AND_3KEY_TRIPLE_DES_CBC); |
| if (srv) goto finish; |
| ++numCertsExported; |
| } |
| |
| if (!numCertsExported) goto finish; |
| |
| // encode and write |
| srv = SEC_PKCS12Encode(ecx, write_export_data, output); |
| if (srv) goto finish; |
| return_count = numCertsExported; |
| finish: |
| if (srv) |
| LOG(ERROR) << "PKCS#12 export failed with error " << PORT_GetError(); |
| if (ecx) |
| SEC_PKCS12DestroyExportContext(ecx); |
| SECITEM_ZfreeItem(&unicodePw, PR_FALSE); |
| return return_count; |
| } |
| |
| } // namespace mozilla_security_manager |
