blob: 4d28134d99cd7721553366edf0ba0f98978437e5 [file] [log] [blame]
// Copyright 2015 The Cobalt Authors. All Rights Reserved.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef STARBOARD_NPLB_SOCKET_HELPERS_H_
#define STARBOARD_NPLB_SOCKET_HELPERS_H_
#include <string>
#include <utility>
#include <vector>
#include "starboard/common/scoped_ptr.h"
#include "starboard/common/socket.h"
#include "starboard/socket_waiter.h"
#include "starboard/time.h"
#include "testing/gtest/include/gtest/gtest.h"
namespace starboard {
namespace nplb {
const SbTime kSocketTimeout = kSbTimeSecond / 5;
// Returns true if the given address is the unspecified address (all zeros),
// supporting both address types.
bool IsUnspecified(const SbSocketAddress* address);
// Returns true if the given address is the localhost address, supporting both
// address types.
bool IsLocalhost(const SbSocketAddress* address);
// Returns a valid port number that can be bound to for use in nplb tests.
// This will always return the same port number.
int GetPortNumberForTests();
// Creates a TCP/IP server socket (sets Reuse Address option).
SbSocket CreateServerTcpSocket(SbSocketAddressType address_type);
scoped_ptr<Socket> CreateServerTcpSocketWrapped(
SbSocketAddressType address_type);
// Creates a TCP/IP socket bound to all interfaces on the given port.
SbSocket CreateBoundTcpSocket(SbSocketAddressType address_type, int port);
scoped_ptr<Socket> CreateBoundTcpSocketWrapped(SbSocketAddressType address_type,
int port);
// Creates a TCP/IP socket listening on all interfaces on the given port.
SbSocket CreateListeningTcpSocket(SbSocketAddressType address_type, int port);
scoped_ptr<Socket> CreateListeningTcpSocketWrapped(
SbSocketAddressType address_type,
int port);
// Tries to accept a new connection from the given listening socket by checking,
// yielding, and retrying for up to timeout. Returns kSbSocketInvalid if no
// socket has been accepted in the given time.
SbSocket AcceptBySpinning(SbSocket listen_socket, SbTime timeout);
scoped_ptr<Socket> AcceptBySpinning(Socket* listen_socket, SbTime timeout);
// Writes the given data to socket, spinning until success or error.
bool WriteBySpinning(SbSocket socket,
const char* data,
int data_size,
SbTime timeout);
bool WriteBySpinning(Socket* socket,
const char* data,
int data_size,
SbTime timeout);
// Reads the given amount of data from socket, spinning until success or error.
bool ReadBySpinning(SbSocket socket,
char* out_data,
int data_size,
SbTime timeout);
bool ReadBySpinning(Socket* socket,
char* out_data,
int data_size,
SbTime timeout);
// Transfers data between the two connected local sockets, spinning until |size|
// has been transferred, or an error occurs.
int Transfer(SbSocket receive_socket,
char* out_data,
SbSocket send_socket,
const char* send_data,
int size);
int Transfer(Socket* receive_socket,
char* out_data,
Socket* send_socket,
const char* send_data,
int size);
struct ConnectedTrio {
ConnectedTrio()
: listen_socket(kSbSocketInvalid),
client_socket(kSbSocketInvalid),
server_socket(kSbSocketInvalid) {}
ConnectedTrio(SbSocket listen_socket,
SbSocket client_socket,
SbSocket server_socket)
: listen_socket(listen_socket),
client_socket(client_socket),
server_socket(server_socket) {}
SbSocket listen_socket;
SbSocket client_socket;
SbSocket server_socket;
};
struct ConnectedTrioWrapped {
ConnectedTrioWrapped() {}
ConnectedTrioWrapped(scoped_ptr<Socket> listen_socket,
scoped_ptr<Socket> client_socket,
scoped_ptr<Socket> server_socket)
: listen_socket(listen_socket.Pass()),
client_socket(client_socket.Pass()),
server_socket(server_socket.Pass()) {}
scoped_ptr<Socket> listen_socket;
scoped_ptr<Socket> client_socket;
scoped_ptr<Socket> server_socket;
};
// Creates and returns 3 TCP/IP sockets, a connected client and server, and a
// listener on the given port. If anything fails, adds a failure and returns
// three invalid sockets.
ConnectedTrio CreateAndConnect(SbSocketAddressType server_address_type,
SbSocketAddressType client_address_type,
int port,
SbTime timeout);
scoped_ptr<ConnectedTrioWrapped> CreateAndConnectWrapped(
SbSocketAddressType server_address_type,
SbSocketAddressType client_address_type,
int port,
SbTime timeout);
// Waits on the given waiter, and returns the elapsed time.
SbTimeMonotonic TimedWait(SbSocketWaiter waiter);
// Waits on the given waiter, and returns the elapsed time.
SbTimeMonotonic TimedWaitTimed(SbSocketWaiter waiter, SbTime timeout);
// Waits on the given waiter, and checks that it blocked between [lower, upper).
static inline void WaitShouldBlockBetween(SbSocketWaiter waiter,
SbTime lower,
SbTime upper) {
SbTime time = TimedWait(waiter);
EXPECT_GT(upper, time);
EXPECT_LE(lower, time);
}
// Waits on the given waiter, and checks that it did not block for very long.
static inline void WaitShouldNotBlock(SbSocketWaiter waiter) {
WaitShouldBlockBetween(waiter, 0, kSocketTimeout);
}
// Waits on the given waiter, and checks that it did not block for the given
// timeout.
static inline void TimedWaitShouldNotBlock(SbSocketWaiter waiter,
SbTime timeout) {
EXPECT_GT(timeout, TimedWaitTimed(waiter, timeout));
}
// Waits on the given waiter, and checks that it did block for at least the
// given timeout.
static inline void TimedWaitShouldBlock(SbSocketWaiter waiter, SbTime timeout) {
EXPECT_LE(timeout, TimedWaitTimed(waiter, timeout));
}
// Socket operations may return specific (e.g. kSbSocketErrorConnectionReset) or
// general (e.g. kSbSocketErrorFailed) error codes, and while in some cases
// it may be important that we obtain a specific error message, in other cases
// it will just be used as a hint and so these methods are provided to make
// it easy to test against specific or general errors.
static inline bool SocketErrorIn(
SbSocketError error,
const std::vector<SbSocketError>& expected_set) {
for (size_t i = 0; i < expected_set.size(); ++i) {
if (expected_set[i] == error) {
return true;
}
}
return false;
}
#define EXPECT_SB_SOCKET_ERROR_IN(error, ...) \
do { \
EXPECT_TRUE(SocketErrorIn(error, {__VA_ARGS__})) \
<< "With " #error " = " << error; \
} while (false)
#define EXPECT_SB_SOCKET_ERROR_IS_ERROR(error) \
do { \
EXPECT_FALSE(SocketErrorIn(error, {kSbSocketOk, kSbSocketPending})) \
<< "With " #error " = " << error; \
} while (false)
#if !defined(COBALT_BUILD_TYPE_GOLD)
std::string GetSbSocketAddressTypeName(
::testing::TestParamInfo<SbSocketAddressType> info);
std::string GetSbSocketAddressTypePairName(
::testing::TestParamInfo<
std::pair<SbSocketAddressType, SbSocketAddressType>> info);
std::string GetSbSocketAddressTypeFilterPairName(
::testing::TestParamInfo<
std::pair<SbSocketAddressType, SbSocketResolveFilter>> info);
std::string GetSbSocketFilterAddressTypePairName(
::testing::TestParamInfo<
std::pair<SbSocketResolveFilter, SbSocketAddressType>> info);
std::string GetSbSocketAddressTypeProtocolPairName(
::testing::TestParamInfo<std::pair<SbSocketAddressType, SbSocketProtocol>>
info);
#endif // #if !defined(COBALT_BUILD_TYPE_GOLD)
} // namespace nplb
} // namespace starboard
#endif // STARBOARD_NPLB_SOCKET_HELPERS_H_